I just bought toyota IFS p/s from Nuttzack, and I don't think the pump he sent me is from the IFS truck (which I thought I was going to get) The reason I don't think its from the IFS toy is because this looks like it would mount to the passenger side of the engine, and the reservour is on top of the pump.

Here it is:
http://coltrain79.tripod.com/sitebuildercontent/sitebuilderpictures/pump1.jpg

here is another pic. Also notice that it looks like there are two high pressure outlets on this pump???

http://coltrain79.tripod.com/sitebuildercontent/sitebuilderpictures/pump2.jpg


Am I correct, or is this an IFS pump?

http://coltrain79.tripod.com/sitebuildercontent/sitebuilderpictures/pump1.jpg

http://coltrain79.tripod.com/sitebuildercontent/sitebuilderpictures/pump2.jpg

here ya go....


EDIT: going to have to put your pics somewhere else........ tripod won't host em.....

You must have posted that when I was editing my post. Thanks for trying. I'll put the pics somewhere else and try again.

Thanks!

lets try this again...

here is the first pic:

http://coltrain79.0catch.com/pump1.jpg
and the second:

http://coltrain79.0catch.com/pump2.jpg

Ya that looks like from an Ifs 3.0 Motor My 4rnr has one like it mounts to the pas side

can't seem to get the pics to show up. So here is link

http://coltrain79.tripod.com/index.html

Rockrat, do you know what that second outlet on the pump is for? I've heard something about a pressure sensonsor that was used to kick up the idle when under load???

Can I just cap this off?

yep thats it plug it fuel injectd models had the idle sensor on them carb did not I plugged it infact so did fatkid when he did his also I broke the senso off and welded the the threaded section shut (that is the pc. from the sensor dont weld on the pump you get it right

Thanks Rockrat! I can mount this pump on the drivers side (as long as I can make a bracket) without causing any probs, right?

It's going to be tight, I may just try and put it on the passenger's side anyways. I have a York 210 that I need to mount on the drivers side, too.

That is goona be tite I used the p/s out of the 4cyl model which
is set up for the dr. side you mite want to get rid of all the air box bullshiat on the pass side and try getting it over there first. if your running the IFS gear box there s not alot of rm to get more over there here is a shot of my shit
http://4play4wheelers.com/PmP_eng_brkt_IMG.jpg
http://4play4wheelers.com/P_S3.jpg