I have 95 F350 4x4, diesel. Manual warn hubs. 89k miles. When making right turn, the left front hub makes loud clicking noise. This only occurs when turning, quiet when straight. Locking hub checks out ok. All the bearings look ok, and spin freely.

-Would a bad bearing make a clicking noise?
-Am I able to replace the bearing race on these hubs, or does it require replacing the whole hub?

Does it click when not in 4wd?

Bearings are replaceable on that axle.


Noise could be bearings or balljoints.

Are you sure its not the brake pad clucking up and down in the mount?

Are you sure its not the brake pad clucking up and down in the mount?

Mine fawking does that :mad3:

Are you sure its not the brake pad clucking up and down in the mount?

Mine fawking does that :mad3:

BOTH mine did that....ended up fill welding the caliper bracket and grinding it flush..then it quit the dang CLICKIN!!:shocked: