|
79muddbug 06-09-2008, 07:37 PM ques. about hp d60, setting one up in a 150 with coil springs, i am turning the c's to help with drive angle,noticed that from factory it was off from one side to the other by 1.5 degrees. ques. is sould i keep it off the same 1.5 degrees after turning them? Ak_F250 06-10-2008, 12:40 AM Ive heard it was set up like that to counteract the arch in the road (higher in the center). Not sure how it helps exactly, or if its even true. Unless its gonna see lots of street use, I wouldnt bother. Besides, with bigger tires and reworked suspension/steering, I doubt 1.5 degrees really make a difference at all. When I turned mine, I set them the same and didnt notice any difference. 79muddbug 06-15-2008, 10:22 AM Ive heard it was set up like that to counteract the arch in the road (higher in the center). Not sure how it helps exactly, or if its even true. Unless its gonna see lots of street use, I wouldnt bother. Besides, with bigger tires and reworked suspension/steering, I doubt 1.5 degrees really make a difference at all. When I turned mine, I set them the same and didnt notice any difference. about 50street/50trail for now,so keep the 1.5 degree in it? | |