redman_30_06
06-10-2008, 05:10 AM
I am putting up for sale my rig, here are the specs
1981 Scrambler frame and some sheet metal
39" Red Label Krawlers
17" beadlocks
4.0 fuel injected
TF727
Dana 300, Twin sticked, 4:1 gears and 32 spline outputs front and rear.
Tranny cooler with electric fan
Power Steering cooler
2 electric fans on radiator
Full cage tied into frame all DOM
Boat sides covered with UHMW
Quick disconnect steering wheel
Front racing seats with 5 point harnesses tied into cage
There is a spot for a rear seat. One just needs to be put back in it.
Dana 60's front and rear
35 spline Yukons all the way around
Detroit front
Yukon super joints
Mt. Logan drive flanges
Spool in the rear
4.88 gears.
4 linked in the back, leafs up front
Full set of Autometer Gauges
Hydro assist steering
On-board air with air tank
15 gallon RCI aluminum fuel cell
Warn XD9000 winch with synthetic rope and safety thimble
Spare driveshaft for the front
Spare longside axle shaft and stub for the front
Spare power steering pump
All of the parts to fix the sheetmetal on it. I just haven't taken the time to do it
I have another 4.0 block and a rotating assembly to build a stroker that will go with it.
Clean NC title
I am sure there are some things I am forgetting.
All in all it is a great rig I have really enjoyed it, its just time for a change. If the buyer is interested I could make a package deal on the 97 F350 that I tow it with.
10,000 for the buggy OBO I might be interested in some trades.
http://i104.photobucket.com/albums/m190/redman_30_06/100_2431.jpg
http://i104.photobucket.com/albums/m190/redman_30_06/100_2430.jpg
http://i104.photobucket.com/albums/m190/redman_30_06/100_2429.jpg
1981 Scrambler frame and some sheet metal
39" Red Label Krawlers
17" beadlocks
4.0 fuel injected
TF727
Dana 300, Twin sticked, 4:1 gears and 32 spline outputs front and rear.
Tranny cooler with electric fan
Power Steering cooler
2 electric fans on radiator
Full cage tied into frame all DOM
Boat sides covered with UHMW
Quick disconnect steering wheel
Front racing seats with 5 point harnesses tied into cage
There is a spot for a rear seat. One just needs to be put back in it.
Dana 60's front and rear
35 spline Yukons all the way around
Detroit front
Yukon super joints
Mt. Logan drive flanges
Spool in the rear
4.88 gears.
4 linked in the back, leafs up front
Full set of Autometer Gauges
Hydro assist steering
On-board air with air tank
15 gallon RCI aluminum fuel cell
Warn XD9000 winch with synthetic rope and safety thimble
Spare driveshaft for the front
Spare longside axle shaft and stub for the front
Spare power steering pump
All of the parts to fix the sheetmetal on it. I just haven't taken the time to do it
I have another 4.0 block and a rotating assembly to build a stroker that will go with it.
Clean NC title
I am sure there are some things I am forgetting.
All in all it is a great rig I have really enjoyed it, its just time for a change. If the buyer is interested I could make a package deal on the 97 F350 that I tow it with.
10,000 for the buggy OBO I might be interested in some trades.
http://i104.photobucket.com/albums/m190/redman_30_06/100_2431.jpg
http://i104.photobucket.com/albums/m190/redman_30_06/100_2430.jpg
http://i104.photobucket.com/albums/m190/redman_30_06/100_2429.jpg