me and a buddy just got done installin a brand new built 460 into a 77 f250 and the block is a 87 and we reused all of the serpentine assembly for silmpicity and so we wouldnt need to carry three different spare belts but my problem is that the power steering pulley is barely hittin the power steering box its a 6 rib pulley and im wondering if anyone has done this swap before and what pulley they used does anyone know what pulley i could use the 1 i have is 5 inches wide and it only needs to be about a 1/2 inch smaller and i also think that the smaller diameter would give the box more pressure and help turn the 42 inch tsls i relly dont want to go back and change all the brackets back to the old shitty style any ideas would be greatly appreciated