|
: 5 axis CNC ported Edelbrock AMC cylinder heads MC 07-10-2008, 02:07 PM http://i2.photobucket.com/albums/y29/bulltear/thDSC0038.jpg $2850 Complete and ready to bolt on. Flow just above 300CFM @ 500 good to 700hp on 420CI and above strokers. Recomended for 360CI and above or bores of 4.100 + DrVic723 07-12-2008, 11:22 PM Do you port 5.9 Cummins heads with the intake already milled off? :grinpimp: MC 07-13-2008, 04:25 PM No only AMC wont mess with any other make. Their should be a local outfit down there by the shop that should be able to care of that. A ported Diesel head huh? Interesting. MC 08-04-2008, 08:15 PM Flow Intake Exhaust 100 74 59 200 151 121 300 214 163 400 260 194 500 296 211 600 304 224 700 304 230 800 304 236 Intake Valve 2.14 Exhaust valve 1.68 (Stainless) Flow tested on a Superflow SF 600 Flow Com Installed height Intake 1.880 Exhaust 1.910 Spring pressure (SEAT) Intake 140 Exhaust 130 (Open at .500 lift) Intake 317lbs Exhaust 300lbs Distance to coil bind .790" Coil bind is 1.120 Spring outside diameter 1.530 Intake valve guide clearance .0018 Exhaust valve guide clearance .002 Seal outside diameter .530 Pushrod tubes installed All together and ready to ROCK! Pics http://i2.photobucket.com/albums/y29/bulltear/eddycnc2.jpg http://i2.photobucket.com/albums/y29/bulltear/eddycnc1.jpg MC 03-24-2009, 07:47 PM !!!!!!!! MC 01-25-2010, 12:06 PM OEM iron 5 axis ported heads avaialble very soon. | |