converting carb 350 to TBI 350....how tough? [Archive]

CruisD64

07-28-2002, 12:23 AM

I have an 85 350 with a carb and have a friend who can get me a good deal on a TBI conversion kit. How difficult would it be to install? Is there a ton of electrical work that needs to be done?

yoda

07-28-2002, 09:37 AM

I am in the middle of my conversion. Just have to finish connecting the electrical to the Ign switch and install my fuel lines, filter, and pump.

My conversion so far (with Pix):
http://www.yotatech.com/showthread.php?s=&threadid=901

This guy has a site with lots of info:
http://www.customefis.com/

What year TBI and what is it off of?

There wasn't a ton of electrical, but I have experience at that. I ran the TBI harness through the toyota harness hole on the right side, and am running the Ign, starter, and battery feeds into the harness hole on the left above the clutch master cyl area to connect to my GM steering column.


Pirate4x4.Com > Brand Specific Tech > Toyota - Land Cruiser > converting carb 350 to TBI 350....how tough? PDA : converting carb 350 to TBI 350....how tough? CruisD64 07-28-2002, 12:23 AM I have an 85 350 with a carb and have a friend who can get me a good deal on a TBI conversion kit. How difficult would it be to install? Is there a ton of electrical work that needs to be done? yoda 07-28-2002, 09:37 AM I am in the middle of my conversion. Just have to finish connecting the electrical to the Ign switch and install my fuel lines, filter, and pump. My conversion so far (with Pix): http://www.yotatech.com/showthread.php?s=&threadid=901 This guy has a site with lots of info: http://www.customefis.com/ What year TBI and what is it off of? There wasn't a ton of electrical, but I have experience at that. I ran the TBI harness through the toyota harness hole on the right side, and am running the Ign, starter, and battery feeds into the harness hole on the left above the clutch master cyl area to connect to my GM steering column.