As requested here are some pics of my recently completed sas
heres what i stated with
http://www.supermotors.net/getfile/547599/fullsize/snow-rack.jpg
just a 93 xlt with a 4" procomp lift, and some 35s

78 bronco coils buckets,and lower cups, sky manufacturing shackel flip
http://www.supermotors.net/getfile/607175/fullsize/dscn0196.jpg
the axle has been totally rebuilt with all new parts minus the knuckle
http://www.supermotors.net/getfile/607185/fullsize/dscn0202.jpg
35 spline chromos
http://www.supermotors.net/getfile/607186/fullsize/dscn0203.jpg
begining of tranny x-member
http://www.supermotors.net/getfile/607753/fullsize/dscn0247.jpg
cage arms
http://www.supermotors.net/getfile/608233/fullsize/dscn0255.jpg
ARBs and 5.13s front and rear
http://www.supermotors.net/getfile/616894/fullsize/dscn0382.jpg
sterling going in with a zero rate
http://www.supermotors.net/getfile/626540/fullsize/dscn2131.jpg
shackle angle, the sock location with these sky hangers gives you a shity shackle angle, i moved mine forward a bit,
http://www.supermotors.net/getfile/626542/fullsize/dscn2138.jpg
centered up pretty well
http://www.supermotors.net/getfile/627918/fullsize/dscn2148.jpg

more x-member work
http://www.supermotors.net/getfile/627921/fullsize/dscn2154.jpg
http://www.supermotors.net/getfile/627922/fullsize/dscn2155.jpg
http://www.supermotors.net/getfile/628165/fullsize/dscn2160.jpg
http://www.supermotors.net/getfile/628719/fullsize/dscn2161.jpg
http://www.supermotors.net/getfile/628720/fullsize/dscn2163.jpg
http://www.supermotors.net/getfile/629496/fullsize/dscn2170.jpg
ttb comin out
http://www.supermotors.net/getfile/629498/fullsize/dscn2171.jpg
http://www.supermotors.net/getfile/629501/fullsize/dscn2176.jpg
http://www.supermotors.net/getfile/629504/fullsize/dscn2178.jpg
cleaned up a little
http://www.supermotors.net/getfile/629940/fullsize/dscn2199.jpg

coil buckets in
http://www.supermotors.net/getfile/630616/fullsize/dscn2226.jpg
shit ton of grindeing on these wedges, but i like the idea of having some control over my caster
http://www.supermotors.net/getfile/638030/fullsize/dscn2374.jpg
http://www.supermotors.net/getfile/638031/fullsize/dscn2376.jpg
goin in for caster
http://www.supermotors.net/getfile/638034/fullsize/dscn2402.jpg
caster set and welder up along with lower track bar mount
http://www.supermotors.net/getfile/639344/fullsize/axle-1.jpg
http://www.supermotors.net/getfile/639345/fullsize/axle-2.jpg
gusset in the back aswell
http://www.supermotors.net/getfile/639346/fullsize/axle-3.jpg
assembled
http://www.supermotors.net/getfile/640550/fullsize/dscn2445.jpg
tire and wheel combo 39.5" iroks on recentered H1s
http://www.supermotors.net/getfile/649430/fullsize/cimg0289.jpg
http://www.supermotors.net/getfile/649433/fullsize/cimg0296.jpg

misc things
http://www.supermotors.net/getfile/649434/fullsize/cimg0254.jpg
http://www.supermotors.net/getfile/649436/fullsize/cimg0276.jpg
http://www.supermotors.net/getfile/654396/fullsize/cimg0337.jpg
start of upper track bar mount
http://www.supermotors.net/getfile/655576/fullsize/cimg0348.jpg
http://www.supermotors.net/getfile/655579/fullsize/cimg0366.jpg
http://www.supermotors.net/getfile/655581/fullsize/cimg0367.jpg
http://www.supermotors.net/getfile/655773/fullsize/cimg0392.jpg

misc finished pics
http://www.supermotors.net/getfile/655774/fullsize/cimg0394.jpg
http://www.supermotors.net/getfile/655775/fullsize/cimg0401.jpg
http://www.supermotors.net/getfile/654395/fullsize/gfhhf.jpg
http://www.supermotors.net/getfile/654397/fullsize/cimg0342.jpg
http://www.supermotors.net/getfile/654398/fullsize/cimg0346.jpg


a little more info:
the rear lift 2.5" aal, with sky flip and 1" zero rate spirng/block what ever you may call them
front has 6" superflex coils for lift, track bar is .188 dom with 7/8" hiems and weld in bungs, steering is knuckle under and has chev 1 ton tre's. its all .250 dom
14" bilstien 5150s at all four corners.
wheels are recentered H1s will mag run flats.
tires are 39.5" iroks

so yea there ya go, feel free to point things out or let me know if you want pics of anything

Bill

looks killer.
all it needs now is a bumper or winch mount.
good work.

looks killer.
all it needs now is a bumper or winch mount.
good work.

yea thanks man, i just order my jd2 m3 so thatll help with the winch and tube bumper.

Sweet! Thanks for posting the pics...super nice bronc!

sweet. thanks for the pics!:smokin:

someday really soon im going to have to tear into my baby...:(

thanks guys!

you did a wicked job on that, all the fab looks good,clean and strong, especially the upper panhard bar mount. truck looks real good:smokin:

Truck looks killer man! I like the looks of the H1 centers. Are they a pressed center? Where did you find them?

Truck looks killer man! I like the looks of the H1 centers. Are they a pressed center? Where did you find them?


thanks, yea they are pressed, i bought 5 of them used off craigslist with some 39.5"s boggers for $700, sold the boggers for $500 and got those blasted and powdercoated for $250

*golfclap*


nicely done sir!!

I love the trackbar bracing...you've been paying attention to other builds..:grinpimp:

Simple Clean and Neat... Looks good man... :smokin: Did you weld the axle tubes to the chunk in the rear? a bud of mine had one spin the pinion up to the bed and waste the driveline and housing.

easy

-j-rod

ok its almost been a week im ready for some on the trail pics:D

*golfclap*


nicely done sir!!

I love the trackbar bracing...you've been paying attention to other builds..:grinpimp

:D thanks

Simple Clean and Neat... Looks good man... :smokin Did you weld the axle tubes to the chunk in the rear? a bud of mine had one spin the pinion up to the bed and waste the driveline and housing.

easy

-j-rod

nah i didnt weld them, i havent seen much or heard of many guys spinningd the sterling tubes, unless i just havent search enough :confused:

ok its almost been a week im ready for some on the trail pics

haha yea i was gunna go up yesterday cause i had the day off from work but my buddy pussied out, any way i think im gunna have a chance to get on the trails this weekend but heres some pics from fuckin around on a buddies farm
http://www.supermotors.net/getfile/659489/fullsize/cimg0444.jpg
http://www.supermotors.net/getfile/659490/fullsize/cimg0445.jpg
http://www.supermotors.net/getfile/659493/fullsize/cimg0448.jpg
http://www.supermotors.net/getfile/659494/fullsize/cimg0449.jpg
http://www.supermotors.net/getfile/659497/fullsize/cimg0452.jpg
http://www.supermotors.net/getfile/659498/fullsize/cimg0453.jpg
http://www.supermotors.net/getfile/659505/fullsize/cimg0463.jpg
http://www.supermotors.net/getfile/659506/fullsize/cimg0464.jpg

Looks good

Id def burn the tubes into the center chunk, just for shits and grins... good lookin truck, I dig the tonneau cover/soft half cab ya got on it... :smokin:

since it's pirate you have to put frame height.

truck looks good. think i should put mine on here? it's scarily similar.

can you get me a measurement from the bottom of the tranny mounting face to the bottom of the frame?