Hello I was wondering if anyone has done this and if you could help me with the brakes? My problem is there is very little pedal is the master not big enough and if so does anyone know of one that will work and bolt to the stock booster thanks. Casey

i believe a chevy MC is a very close fit, you would have to cut your old lines and reflare for SAE fittings.

chevy what? thanks

I dont have 60 i have a 44. I used a hydrobost system from an astro van with a 3/4 mc from a lat 70s burb. I redriled the vac boster to take the hydrobost. i welded the 720 rod to the hydrobost to make it work and just ran new sae lines. I love it.

hey just to let yal know I ended up with a mc off of a 98-00 dodge 1/2 - 1 ton 2wd 1 1/4 bore 12mm front output and 10mm rear out put need to adjust the free play 6mm thats it. 100 bucks from napa. just that much closer