alright guys sorry i know this is kinda a newb question but here goes. I had started to put in my new disconnects from rubi, but the i notice something, my sway bar for some reason i think isnt the factory swaybar. Here are some pics of what it looks like

http://community.webshots.com/user/offroadman83.

Anyone know what kind of sway bar it is and have any ideas of how we can get somethin to work with this setup besides switchin out the sway bar. thanks

First, I would say that this isn't quite college level four wheeling question. However, since you will be needing some fabrication to get sway bar discos to work, I'll bite here.

That sway bar looks like the one on my XJ. Has poly bushings, but it should work. The big problem that I see is that you don't have any where to mount the lower links. You will have to weld something on the axle tubes that will have a .5" bolt hole thru it that will accept the disco lower. Plus you will need to line this up laterally so that it meets the upper. Plus the lower will have to be high enough so that you can use the removable links that RE sent you and still keep your sway bar flat when connected.

Break out the welder and torch. Happy fabbing.

SeanP

Just take the sway bar off.

yea rubi for some reason in my extrem duty kit forgot a few parts but this is my daily so i need to wipe up something quick. the spring plate should have a bolt that should screw right into the threads while it didnt come with any for both those sides.

I've never had a sway bar on any of my rigs. And all of them were DD's at one point in time.