http://www.sierrarockcrawlers.com/images2/0978.jpg

How does that work? Is it designed to reduce bump steer or? Why go with this setup as apposed to the standard setup. Just curius. Very cool sammi as well.

Matt

It's used to get the same results as crossover steering. It can also help decrease your turning radius if setup properly.

its and idler arm used to decrease the drag link angle...pic thanks to goat1.
<IMG width=500 height=378 SRC="http://www.pirate4x4.com/ubb/uploads/DSC000200.jpg">

so how does it mount to the frame or cross member does it use a rubber susp bushing or a heim joint or what? I under stand the principle now just how does it mount to the frame.

Matt

I am pretty sure its a poly bushing but am not positive

check out calmini (http://www.calmini.com)they sell the cross over kit you are looking at. they have a jeep company too called full traction I think which sells the same thing but for jeeps.

Is supposed to work good but is more moving parts then you really need.