I am planning to build a rock guard/skid plate for my pumpkins so does anybody have any pictures for ideas <IMG SRC="smilies/confused.gif" border="0">

Thanks alot <IMG SRC="smilies/smile.gif" border="0">

I cut the bottom of my diff off and replaced the cut section with 1/4" plate. Ended up with about 1" more ground clearance and integrated skid plate....
http://66.12.181.251/geiger/rearaxle/3593s.jpg

http://www.allprooffroad.com/geiger/rearaxle/3603s.jpg

http://www.allprooffroad.com/geiger/rearaxle/3725.jpg

Here is the one I made for my 14 bolt. Its made out of 1 inch 1018 and 1 steel Bar stock.

My picture downloads but wont show it. Sorry

Originally posted by Blazr77400:
<STRONG>My picture downloads but wont show it. Sorry</STRONG>


You have to put the pic in the post!

I thought you were talkin about Halloween pumpkins HHHHaaaaaHHHHHAAAAAAAAAAAA

Sorry that was dumb

http://community.webshots.com/photo/21431984/22819516AbrBFPlQRw
Try This.

<IMG width=560 height=495 SRC="http://www.pirate4x4.com/ubb/uploads/7029152.jpg">
I think I did it.

Heres the one I made for my mine <IMG width=640 height=480 SRC="http://www.pirate4x4.com/ubb/uploads/chris2.JPG">

does it have a drain hole? do you have a problem with dirt, mud, other stuff geting stuck in there? or you just roll your rig frequently to clean it out?? <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

Originally posted by FRIZZLEFRY:
<STRONG>
Heres the one I made for my mine
</STRONG>

[QUOTE]Originally posted by dennisuello:
[QB]does it have a drain hole? do you have a problem with dirt, mud, other stuff geting stuck in there? or you just roll your rig frequently to clean it out?? <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0">

Water drains out of the bolt holes and I dont do mud any more so thats not a problem.

<IMG SRC="smilies/biggrin.gif" border="0">