|
JeepYj94 08-02-2002, 04:02 PM i have a 440 i'm gonna swap into a Cj, i wanna stay w/ a manual so that really leaves only a 435.....but i have no idea what t-cases will mat to it. AA doesn't make an adapter for a Dodge 435 to a Dana 300, which is what i was wanting to use.....so my question is what t-cases fit a dodge Np435?? tvguy 08-02-2002, 04:11 PM I have an NP205 behind my 435. I've seen 203's and 208's behind them as well . . Scouter 08-02-2002, 04:52 PM Find a Dodge NP435 with a 205, 208 or 241 TC on the back and it will have a 23 spline shaft and a 6 six bolt pattern which is the same a Jeep Dana 300. I have a Dodge 440/435/23 spline Atlas bolted together on the floor that is going in my Scout. FULLSIZE 08-02-2002, 07:12 PM i found a 435 with a 208 adapter behind it and bolted up the dana 300. best mod i made to my old jeep. i redrilled the adapter also to clock the t-case higher, twin stick is a good mod also.:D JeepYj94 08-02-2002, 08:38 PM awesome, that is good news!! Thanks! | |