Here you go........

Base is built from 3/8" thick plate

Center Mohawk is built from a single piece of 3/8" plate, formed 4 ways and a drain is added.

Both side bearing cap covers are from a piece of 1/4" plate that is formed

All welded and ready for you to install.

As always no BS fine print warranty you abuse it and break it send it back and we'll send you a new one and add you to the hall of fame.

By the way this actually exists now. Stan @ Branik Motorsports tweaked one of our covers (via an XXRA competition) enough it started leaking. No he didn't break it but I figured after 8 years of building parts and no one on the wall of fame it just didn't seem right having a bare wall anymore!:D

Oh by the way he still runs one of our cover we just added a Ramp at the bottom since we knew he liked to use his axle to go air born as much as possible!

i will be sending you payment via paypal tonight when i get home for one of these

i bought your 14 bolt cover a while ago and was very impressed

thanks

edit: does the drain come with it or do i have to add it like the other covers?

One quick question for you on these Awesome looking new covers...
First is how low below the axle housing do they hang when mounted, (roughly) just to get an idea of clearance??
Definitely look, "Nearly Bombproof" as per your description!! Can't wait till my rocks get here so I can get a set for myself!!!
Thanks!
Matt

I want 2! Paypal on the way!

Obviously there is no fill w/ these so we incorporated the drain in all of them for the price shown. Thanks Shawn

i will be sending you payment via paypal tonight when i get home for one of these

i bought your 14 bolt cover a while ago and was very impressed

thanks

edit: does the drain come with it or do i have to add it like the other covers?

Sounds good, Thanks Shawn

I want 2! Paypal on the way!

thanks for all the orders guys!

ttt

Have these now in stock! Took us a bit to get caught up and get our fixturing down but here we are! Thanks Shawn

Curious if a set could be made w/3/8" side sections????

I am digging everything else but that. :D

You could, however I warranty these just like all my other covers..............

In all seriousness I looked at that originally and did not see the need as the center bears all the load and those sides give it very little contact area. If your interested call me and we will do what you need to get you taken care of as always. Thanks Shawn


Curious if a set could be made w/3/8" side sections????

I am digging everything else but that. :D

ttt

Tuff Truck Approved!

In stock and ready to ship! Thanks Shawn

Thanks for the orders guys!

How hard are these to install. like cutting out the old and welding in the new?

Yep, literally that easy. Let me know I have several sitting on the shelf we can ship ASAP! Thanks Shawn

How hard are these to install. like cutting out the old and welding in the new?

Sold a record number ofthese this past weekend! Thanks for the orders guys! Shawn

More back in stock! Thanks Shawn

ttt

Thanks for the orders guys, these sure were popular today! Shawn

More built and ready to ship!

wow! you guys are eating these things up!

ttt

Make sure your wife or girl friend knows this is on your. List Tonya will be here to walk them thru buying it w/o making them feel uncomfortable!

ttt

bump

More in stock and ready to ship!

tag

more shipped and more built and on the shelf!

ttt

I think that the wife needs some of those for her rig! Ever think of sending some out as a sponsor?
Check Her out and VOTE #41 please! Thanks!
http://www.fourwheeler.com/eventcoverage/129_0904_top_truck_challenge_2009_challengers/index.html

"HOLLYWOOD"

We do in fact sponsor several rigs in TTC every year! Thanks Shawn

This must have been the week for 2.5 tons!

ttt

shipping to 41722 for one cover, thanks

Rockwell Mohawk Covers $159.95 delivered lower 48


shipping to 41722 for one cover, thanks

Nice talkiing to you. Thanks Shawn

ttt

Thanks for the pimp!

I just recieved the first of 2 covers. Awesome product. Pure beef. Thanks Jim

ttt

more shipped today! Lifetime Warranty means just that, here at GLO!

Apparently there is a new aftermarket 2.5 ton girdle floating around that interferes w/ our standard Mohawk cover. We will be building a new version to accomodate this upgrade. Thanks Shawn

Several more shipped yesterday! We still have these units on the shelf ready to roll! Shawn

ttt

Yes and the last time we spoke you talked of just using a piece of round bar as a shim for the covers you already have.

Thanks for letting me know. I only sent you a template and called 5 times in 3 weeks....:shaking:

more out the door today! Thanks Shawn

several more going out today. Thanks guys!

ttt

Thanks for the orders guys!

More on the shelf ready to go!

Ttt

Stay tuned we are releasing a new revision w/ some added features!

More out the door yesterday!

Did we mention unbreakable?

Revisions are almost done............................ Can't wait to show off the new upgrade option!

ttt

Got the new ones yet? What will be different. I need to order 2.. wondering if I should wait for the new style.

Thanks
Andrew

You have a PM. Thanks Shawn

Got the new ones yet? What will be different. I need to order 2.. wondering if I should wait for the new style.

Thanks
Andrew

i was wondering if you could make a set for a couple 5ton front ends

Yes, however they would be custom which = $$$$$$$ and I do not have access to a set of 5 tons here locally that I am aware of. PM me if you would liek to discuss this further. Thanks Shawn

i was wondering if you could make a set for a couple 5ton front ends

Multiply covers on the shelf ready to go!

Lifetime warranty and a drain that is meant to take the abuse these will see!

ttt

More out the door and more restocked on the shelf! Ready to ship!

Quite a few sets in stock and ready to ship!

ttt

Best never rest, and neither does the warranty. Can anyone say lifetime?????

We now have boot guards to go along w/ these, PM for a special combination discount!

ttt

Thanks for the orders!

ttt

Stay tuned we are releasing a new revision w/ some added features!

hay when will the new ones be ready, im intersted in seeing them. i ordered some from rock city two weeks ago and still have not got them so im going to cancel my order and order from someone else

Still working on those, I have the others in stock on the shelf. However unless the other vendor is trying to screw you over you may want to give him a call. This is the busy time of the year and we are like everyone else we get behind occasionally. Things happen is all I am saying. If you still need em we have them. Thanks Shawn



hay when will the new ones be ready, im intersted in seeing them. i ordered some from rock city two weeks ago and still have not got them so im going to cancel my order and order from someone else

Still working on those, I have the others in stock on the shelf. However unless the other vendor is trying to screw you over you may want to give him a call. This is the busy time of the year and we are like everyone else we get behind occasionally. Things happen is all I am saying. If you still need em we have them. Thanks Shawn

i have tried and tried to get ahold of him with no returned calls. cant wait to see the new ones post some pics

The new ones are for use w/ girdles and currently there really isn't much to show as we are in the middle of a revision. Thanks Shawn


i have tried and tried to get ahold of him with no returned calls. cant wait to see the new ones post some pics

Have you seen our new boot guards?

http://www.pirate4x4.com/forum/showthread.php?t=822343

Bump to the top! On the shelf and ready to ship!

Still the best, no main welds to bust as we bridge the center section fully!

Always on the shelf ready to ship!

Quite a few of these on the shelf and ready to ship!

ttt

bump

If anyone is needing a pair of these we are heavily ovrstocked. PM me and we'll see what kind of "special deal" we can make on a set delivered to you. Thanks Shawn

ttt

bump

I did it again and we're overstocked on these and boot guards. My loss is your gain if your needing a couple of mohawks and some boot guards PM me for a smokin x-mas deal!

ttt

I finally got my stock pans cut off today and cleaned up. Your pan fits perfectly flat all the way around, no gaps what so ever. Quality. Gained a touch over an inch an a half of clearance.

Bump for a good pan and great customer service. I still can't believe you got them to fit in a flat rate box. You should've heard the mailman cussing. Thanks again.

Sorry your mailman hates us! However I am glad you were pleased with the product. And yes those are a very tight fit in a $16.00 flat rate box ( I wish I could squeeze two in at the same time but they kinda frown on that) Thanks Shawn


I finally got my stock pans cut off today and cleaned up. Your pan fits perfectly flat all the way around, no gaps what so ever. Quality. Gained a touch over an inch an a half of clearance.

Bump for a good pan and great customer service. I still can't believe you got them to fit in a flat rate box. You should've heard the mailman cussing. Thanks again.

Do you make these for 5 ton Rocks?

Currently we do not, main reason is that I have yet to get ahold of a set of them to tear apart in my shop. If someone is local to me and wanted to be a ginny pig then we can get you some inexpensive covers.....:D

Do you make these for 5 ton Rocks?

More in stock and ready to ship!

Thanks for the orders guys!

Quite a few of these and boot guards on the shelf currently. If you need the best and want a deal PM me your needs and I will see what I can do to take care of you on price. Thanks PBB'ers, stay cool

Just saw a nice pic of these mohawks on a really cool build in the gen4x4 section, about half way down the page. Click the link below and take a look see for yourself.

http://www.pirate4x4.com/forum/showthread.php?t=904558&page=13

We have quite a few of these on the shelf, if you need a set of these or the boot guards PM me here for a PBB only special deal!

Hope this beautiful weather holds out awhile longer......

More on the shelf ready to ship!