Is your web page down and when will you post the specific's on your new buggy?

It's down temporarily and the web-master is on the other side of the country...it'll be back soon.

Meanwhile - I can tell you this:

Specifications:

Dimensions:

Overall Length 141"

Overall Width 84"

Body Width 61.5"

Height 71.5"

Wheelbase 105"

Front Driveshaft 37.5"

Rear Driveshaft 30.5"

Front Axle 71" wms, 84" overall

Rear Axle 67" wms, 80" overall

Weight Front 2200 lbs

Rear 1600 lbs

Total 3800 lbs

Approach angle > 90*

Departure angle > 90*

Crawl Ratio 6.55 x 2.01 x 2.03 x 4.10 = 110:1


Static loaded tire dimensions:

Height 37"

Width 12"

Clearances:

Under Front Diff 11.5"

Under crossmember 19.5"

Under Rear Diff 11"

Components:

Frame: 1980 Chevy K3500 1 ton 4x4

Body / Cage: Custom, 1-5/8" .120 wall tubing

Engine: Chevy 350 cu in

Transmission: SM465

Transfer cases: NP 203 mated to Jeep D20

Driveshafts: Conventional non-CV style

Front Axle: Chevy Kingpin D60, 4.10 gears, welded diff, disc brakes, 71" wms

Rear Axle: Corporate 14 bolt, 4.10 gears, welded diff, 67" wms

Tires: Michellin XML Military Radials 325/85/R16, heavily grooved

get the brakes on?

Thanks....Coyote

Haven;t done the brakes yet - fabbing a winch mount first.

I did find that AFCO have a GM caliper for 3.5" tubes - so I'm going to try them.

I took loads of detailed pics, and they'll be up as soon as the server is back online

After wheeling some this weekend I think I will remount my calipers to the top of the axle. the stock postion might be great for the bleader screw but, They are in Harms way.

Whats the web site address for the this AFCO?

The site:

http://www.secureperformanceorder.com/products/


The brackets:

http://www.secureperformanceorder.com/products/getproduct.cfm?CategoryID=3&ClassID=43&SubclassID=216&ProductID=1769