|
GloNDark 08-04-2002, 05:11 PM what's it take to convertion a slip yoke NP205 to a fixed rear yoke?? Was there a year range for the NP205 with the fixed?? Or is it a custom deal?? Help Help the NP205 "newbie" :D:D:D THANKS! Chris onetonwillysands10 08-04-2002, 06:29 PM all you need is the fixed yoke bearing collar and tailshaft from a "fixed yoke205." It will swap.You can even take the tailshaft from a ford and put on a chevy or vice versa..Most of the 205 is interchangable.Good luck.:D John Deere Ranger 08-04-2002, 06:46 PM Jess at High Angle Driveline could probably help ya out there reddwarf 08-04-2002, 07:22 PM All GM NP 205's before 1980 are fixed yoke. If you can't find one of those, you need a 2wd:flipoff2: onetoncv 08-04-2002, 08:50 PM A donor 205 is a good place to start- its pretty simple- Jess GloNDark 08-04-2002, 10:02 PM Originally posted by reddwarf All GM NP 205's before 1980 are fixed yoke. If you can't find one of those, you need a 2wd:flipoff2: This t-case come out of a 78 :flipoff2: ;) But I think the previous owner thru out the fixed yoke to match the exsisting driveshaft on the K5 I robbed it from. YellowSub1962 08-04-2002, 10:28 PM I have an '80 205 from a blazer and I think all I used was a tail shaft housing (collar), and a tailshaft and yoke from a Ford application... :usa: | |