Well about three months ago I decided to do something with my Jeep and I am proud to say that it is currently under way. I was originally only going to be spending about $3000 and what a laugh that was. No regrets! We got my CJ SOA with 38" TSL's, full width and 4.10 gears for now. We are almost done with the suspension, but I have a question.
I'm gonna be dropping the three fiddy here in the next few weeks and I got that part under control. It's the wireing that I have no clue about. It came with all the gear and smog equiptment. How much am I looking at to get this thing wired up and running? (considdering it is in running shape) I don't want to get taken to the cleaners.
Any advise or answers on a ballpark?

I put a TPI SBC, SM465, Dana 300, FF 14 bolt rear 4.56 Detriot Dana 60 front 4.56 detriot, SOA 3.5 BDS's, on 15X10 MRT beadlocks with 40 inch TSL on a 1995 YJ and I am in it 12K, and went two years with driving it. I did use almost all new motor doodaas and it looks like it came from the factory that way. I finished it two weeks ago.


Are you going with a carb, TBI, or TPI? I might be of sone help to you if you need it. But my advise to you is get the factory schematic from both the donor chevy and your CJ. They will be invaluable to you.

I HIGHLY dout you wil but, if you come near 3K with yours, tell me how you did it. If you have any questions feel free to ask. I could also send pics.

Good Look
Chad


<<<<I am still looking for a factory black YJ steering wheel>>>>