JoeBlow
10-02-2008, 05:36 PM
Hi, I started a new project. I picked up a 82 Bronco with very little rust for 350.00. It was bone stock with a 302, C6 and NP208. It was a Red Cross vehicial and looked like it did from the factory. Even under the hood. All smog and vac lines are there and in good condition.
the Sterling FULL FLOATING 10.25" with 5.13's, Detroit WAS A DIRECT BOLT IN. The driveline is a 1350 CV with a 1410 slip yoke at the diff from Jess.THE front got a D60 SAS.I did a 3-link and Sway-a-Way 12" C/O's. If any of this sounds familar it is from my F150 That was wrecked.
As for the tires and no lift... I am running 38" TSL's. This is going to require mini tubbing the rear. The front will need new inner fender wells But that will be fairly easy.
I am going to do the bed and front floor in black bedliner and get newer seatsout of another Bronco or F series truck.
I am putting a 400hp 396cid FE in it later on.
Heres to round 2!
some pics of the project so far...
<embed src="http://www.box.net/static/flash/box_explorer.swf?widgetHash=lgq8glbdu5&cl=0" width="460" height="345" wmode="transparent" type="application/x-shockwave-flash"></embed>
or
http://www.box.net/shared/lgq8glbdu5
the Sterling FULL FLOATING 10.25" with 5.13's, Detroit WAS A DIRECT BOLT IN. The driveline is a 1350 CV with a 1410 slip yoke at the diff from Jess.THE front got a D60 SAS.I did a 3-link and Sway-a-Way 12" C/O's. If any of this sounds familar it is from my F150 That was wrecked.
As for the tires and no lift... I am running 38" TSL's. This is going to require mini tubbing the rear. The front will need new inner fender wells But that will be fairly easy.
I am going to do the bed and front floor in black bedliner and get newer seatsout of another Bronco or F series truck.
I am putting a 400hp 396cid FE in it later on.
Heres to round 2!
some pics of the project so far...
<embed src="http://www.box.net/static/flash/box_explorer.swf?widgetHash=lgq8glbdu5&cl=0" width="460" height="345" wmode="transparent" type="application/x-shockwave-flash"></embed>
or
http://www.box.net/shared/lgq8glbdu5