|
85toyboy 08-05-2002, 10:08 PM I just trimmed my front fenders to mount the 38's on my 85 toy and am wondering about firewall clearance. I used a hammer to tub the passanger side about 2 inches but now there is no space for the computer. Where is a good place to mount the computer within reach of the stock wires? How much metal should I move in order to stuff the 38's, should I continue with the hammer or bust out the welder and torch. Anyone got pictures of what you have done? Chris Geiger 08-05-2002, 10:23 PM See my article on this subject here... http://www.allprooffroad.com/geiger/firewall/index.html nightcrawler 08-06-2002, 08:36 AM Originally posted by Chris Geiger See my article on this subject here... http://www.allprooffroad.com/geiger/firewall/index.html I finally had my runner geigerized last weekend and was extremely grateful that I used your guidelines to complete the task. The only thing I'm curious to know....... where can I obtain an epoxy seam sealer besides from the autobody shop? Inquiring minds want to know. 85toyboy 08-06-2002, 03:20 PM Been there read that, different body style but I guess the concept will work the same. Where did you mount the computer?? | |