I have up for sale:

Brand New, Less than 1 Hour on motor, Small Block Chevy 383 Stroker, With Tuned Port Injection, and Ram Jet 350 EFI and harness.

Here is a list of some of the parts:

1993 4 bolt main Late model 1 piece rear main block, Bored, Honed and Line Bored

Scat Steel Crank (Stroked)

Scat 6” Rods w/ ARP rod bolts

Keith Black Hypereutectic flat top pistons with coated skirts, and valve reliefs. Compression ratio is 10.5:1

Molly Piston Rings

Fully balanced rotating assembly

Cleavite Bearings (All)

Comp Roller Cam (Inquire on the specs)

Comp Roller Lifters (Hydraulic)

New Push Rods

Flow Pro Heads, Made by Holley(2.02 Intake, 1.60 Exhaust, 1 Piece stainless steel valves)

Fel-Pro Gaskets

Fel-Pro One Piece Neoprene Oil Pan gasket

GM Performance Parts Valve Covers

GM Performance Parts Electric Water Pump

GM Performance Parts Late Model Distributor

GM Performance Parts Ram Jet 350 MEFI 4 EFI system with harness and ECM

Tuned Port Multi Port EFI off of a 1986 Corvette 350

Accel Fuel Injectors, I think they are 28 lb/h injectors

Accel Adjustable Fuel Pressure Regulator

MSD 8.5 Spark Plug Wires

Gear Reduction starter

Tuner Pro EFI tuning software and cable

Scanner Pro real time scanning software for data logging

Griffin Aluminum Radiator (Used)

Block Hugger Headers ceramic coated (used)

POR-15 Engine Paint, 2 Part Epoxy paint process, will last for ever

I have a Flywheel, and Flexplate balanced to the rotating assenbly, just let me know what tranny is going behind it.

The engine has only been run, never driven, engine will still need broke in after installed.

This was in my project rock crawler, I have parted out the vehicle and now it is time for the engine to go...

Asking: $5800.00 Negotiable (call to negotiate)

I also have a SM465 2WD with New Clutch $200.00
and NP205 Divorced, Ready for twin sticks (all modifications done) $300.00

http://img216.imageshack.us/img216/8568/dscn0413jk1.th.jpg (http://img216.imageshack.us/my.php?image=dscn0413jk1.jpg)http://img216.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)
http://img232.imageshack.us/img232/6561/dscn0414qq5.th.jpg (http://img232.imageshack.us/my.php?image=dscn0414qq5.jpg)http://img232.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)
http://img232.imageshack.us/img232/7885/dscn0415ix5.th.jpg (http://img232.imageshack.us/my.php?image=dscn0415ix5.jpg)http://img232.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)
http://img232.imageshack.us/img232/6374/dscn0436df6.th.jpg (http://img232.imageshack.us/my.php?image=dscn0436df6.jpg)http://img232.imageshack.us/images/thpix.gif (http://g.imageshack.us/thpix.php)

Please Feel Free to call me with any questions.
Eric 208-351-2024
Located in Rexburg, Idaho

Price has dropped!!
$5500.00 Negotiable