This offer is good until the end of this month and if you need question answered please contact me. If you need custom hoses made or just need help going over your list i can do that. Aeroquip has high pressure lines for your steering and I can make custom brake line any length in -3 or -4, so go check out my website and start ordering.
I'm also in the same building with KRC Power Steering and work with their customers to make sure they get everything they need.
Thanks, Andy

http://www.perfhosedist.com/_images//P4X4-november-special.gif

I need to go from these -8 bungs to a 90 degree 3/8" hose barb. Do you have something for this?

Funny. I have the same tank and request. Need #8 to 3/8" barb 90*.

I need to go from these -8 bungs to a 90 degree 3/8" hose barb. Do you have something for this?

Here's the two part numbers it will take:
AQP FBM2410 (-8 to -6 reducer) check link for price
http://www.perfhosedist.com/catalog_i7480666.html?catId=292807
and also check this link for -6 (3/8" hose) 90° barb fittings
http://www.perfhosedist.com/catalog_c297476.html
or
http://www.perfhosedist.com/catalog_c297500.html
both links are for socketless hose (barb fittings) if you use Aeroquips socketless hose on these fittings you don't have to use hose clamps. These fittings are great for areas where a hose clamp will cut you every time you get near it. Now if you have to get the hose off the fitting you have to cut it off that's how tight they are.

If you have any more questions please let me know.

Thanks,
Andy

Funny. I have the same tank and request. Need #8 to 3/8" barb 90*.

check what I replied above.

Let me know if this helps.

Andy

TWO DAYS LEFT!!!!!!!!!!!!!

You will not find Aeroquip this low anywhere else.

will those socketless fittings/hose work with high pressure EFI? 60-70psi? I am looking at redoing my fuel line setup and this might be a good option. I think 20ft might be enough. I will need some fittings for my stock 5.3 fuel rail as well.

shipped to 32218

Thanks

will those socketless fittings/hose work with high pressure EFI? 60-70psi? I am looking at redoing my fuel line setup and this might be a good option. I think 20ft might be enough. I will need some fittings for my stock 5.3 fuel rail as well.

shipped to 32218

Thanks

just sent you a pm

Extending this offer until the end of this week 11/07/08!!!!!!!

So go ahead and send me those orders!