Let me quote you on a set of links made from 7075. The links come with each end cut to a hex with left and right threads with the left marked for easy identification. Then cleaned up with a brushed finish.
Most any thread is available.
http://respite.org/images/cj66dean/Kickassproducts7075linksendshot.jpg

can i get a price for 2 , 36 inch long 2 inch diameter 1 1/4 left and right thread. 07834 thanks

Can I get a quote for two 36" long, 2" dia with 1" R & L threads,
Also, two 48" long 2.500" dia with 1.250 R & L threads.

Thanks Dean.

quote on 2 36" long 2" dia bars with left and right hand threads 1.25 heims

Can I get a quote for (3) 2" diameter links, 30" long drilled for 1.25"x12tpi shipped to 04254?

Thank you,

Ken

PM's sent

Looking for 2 @ 32" 2" each with L&R 1" th

and 2 @ 34" 2" each with L&R 1" th

shipped to 07457

Thanks in advance
D.

quote on 4 36" links,2" dia. 1 1/4-12, all right hand thread. And just slight wrench flats if possible, don't wanna lose any more material than necessary. (don't want the hex)

2" 50 1/2"long 3/4 16 thread for L and R

quote on 4 36" links,2" dia. 1 1/4-12, all right hand thread. And just slight wrench flats if possible, don't wanna lose any more material than necessary. (don't want the hex)

No problem. The large ones in the photo don't have much off but the others were made to fit a wrench. I only have done one set like that as I like the way the big links look. I can do 2 flats are 4 flats if you like rather than the normal 6. Up to you though since they are made to order.

Dean

Quote on 4 links 2.5"dia. 40" length for 1 1/4". Shipped to 24153.
Thanks Dean:smokin:

quote for 2 links at 36in, 2.5in. 1 1/4 thread, left and right. with only 2 flats cut in the ends. shipped to 85268
thanks buddy

Quote for 2 42" with 1 1/4 L&R shipped to 95351.Thanx

can I get a price on

(4) 36" long, 2" diameter with 1 1/4 -12 L&R

shipped to 48329

Thanks!

4 - 2.5" 33" long with 1.25" 12 tpi LH and RH to 29607. Thanks

4 - 2.5" 33" long with 1.25" 12 tpi lh and rh to 29607. Thanks

x2

lol

Price quote, 4 links 2.5 dia. 40'' length for 11/4. And 4 links 2.5 dia. 36" length for 11/4. Shipped to 73501. Thanks.

how about one 36" long 2" diameter. 1.25" left and right hand threads. 97223 thanks

PM's sent

2- 38" x2" 1.25 left and right. Just 2 flat spots
and the same but in 2.5"

2- 38" x2" 1.25 left and right. Just 2 flat spots
and the same but in 2.5"

PM sent

2 2" 7075 t-6 links. 1 1/4 right and left hand threads. 33 3/4" long. Shipped to 97223. Thanks

Well was thinking of going 2.5" .500wall DOM. But may give this a try.
Price on 2.5" 4ft set up for 1.25
And ill pick up.
Thank you.

how long does it take to make these thx jim

Can I get a quote on 2 links 2.0"x36" tapped 1.25" lh & rh and 2 links 1.75"x32" tapped 7/8" lh & rh
Thanks Marty

Well was thinking of going 2.5" .500wall DOM. But may give this a try.
Price on 2.5" 4ft set up for 1.25
And ill pick up.
Thank you.

Quote of 4 2" 1 1/4"-12 right and left thread shipped to 87124.

Thanks

dean, can you get me a quote on 2, 2.5" dia 36" long links, tapped 1.25-12 RH on one end, 1.25-12 LH on the other.

On all of these mill the flat spots on the ends.

shipped to 27803

price on 4, 2.5" by 48" with 1.25 threads

thanks

For 2 rockwell tie rods 2"x 51" long left and right 1 1/8" 12 thread and shipping to 37327.
Thanks,
Tyler

Quote of 4 2" 1 1/4"-12 right and left thread shipped to 87124.

Thanks

how long?

i need a quote separate for 8 30" 1.5" tapped 3/4-16 l+r hand and a quote for 2 bars the same as the others. shipped to 77354

I would like a quote on 2 links 2" x 28" and 2 links 2" x 29". All with 1.25" right hand threads. Shipped to 38452

2 2.5'' for 1 1/4-12 johnny joint 36'' long shipped to 80304.

4- 2" 7075-T6 links 38" long (1 1/4 12TPI R/L threads)

TX,78040

(2) 2"x36" left and right threads for 1.25" joints
(1) 1.75"x36" left and right threads for 1" joints

PM's sent

Thanks

what do you think about making some radius arms,ya know similar to ford but tube,I'm thinking of linking the front of my cj7 and it seems alot simpler than multiple links just two radius arms and a pannard rod [or whatever you want to call it] thanks for your input,by the way i got the wheels yesterday and painted them today and they look awesome,thanks for the extra nuts I chased them all out cleaned them all up and picked the best

(2) 2"x36" L/R threads 1.25" 93722

what do you think about making some radius arms,ya know similar to ford but tube,I'm thinking of linking the front of my cj7 and it seems alot simpler than multiple links just two radius arms and a pannard rod [or whatever you want to call it] thanks for your input,by the way i got the wheels yesterday and painted them today and they look awesome,thanks for the extra nuts I chased them all out cleaned them all up and picked the best


I don't see any reason why not. Your wheels were the first ones I did with my new welder so I was figuring it out as I went.
I could't remember if your wheels had them all or not so I added a few just to be sure.


On the 2" @ 36 they go for $150ea and I guess the shipping will be about $20.

quote on..

1 @ 36" long , 2" o.d. , 1" threaded at each end L&R
2 @ 43" Long ,2" o.d. , 1" threaded at each end L&R

With the hex on all ends. Thanks

two at 2"x42" with 1.25" threaded L/R

#1 Quote on (4) 2.5 links, 40" long tapped left/right for 1.25 joint

#2 Quote on (4) 2 inch links 40" long tapped left/right for 1.25 joint

thanks

7075 aluminum links
Can you do 2.5"?
8x 2.5" links 50" long. Tapped for 1.25 left and right with a milled flat spot for a wrench. Shipped to 28270
Thanks

Can I get a price for 2 , 36 inch long 2 inch diameter 1 1/4 left and right thread. Also 2 36 inch long 1.5 inch diameter 7/8" R/L threads. Shipped to 78613?
Thanks
-Chris

I was wondering if you could send me pricing per inchfor 2.0" Dia.? Also what it cost's per thread drilling and taping lh/rh threads. I can provide the ends but would entertain your cost's on 1.25" QA1's.

thankyou
Bare

Price for 2- 2.5"x33.75 for 1 1/4 Heims local pickup

PM sent

price of (4) 2 in. at 42in. and (4)of 1.5in. at 34in.
the 42in. has 12tpi and 34 is 14 tpi
I'll pick up
Thanks!

Special on 2" links, any thread up to 40" for $150ea. Anything longer is $2 and inch after that.

Btt