What I am lookin for is pics of CJ with extended frames when using 2x4 metal. I have searched and found plenty of TJ and YJs but no CJs and their frames are a little differnet then CJs. Thanks for the help. Ken

This is how I did it. I outboarded the whole extension and frenched the shackle hanger. With a small shim plate it was the right width for a Waggy D44.

http://i238.photobucket.com/albums/ff153/nhfxrs/framefront.jpg

In the rear I used receive stock since height didn't matter.

http://i238.photobucket.com/albums/ff153/nhfxrs/framerear.jpg

thanks for the pics, I am linking the rear and leaving the front alone for now. Anyone with any more pics. Thks Ken

I didn't use 2x4 I used 2 "C" channel's and welded them together like the stock frame. I extended mine in the middle.

Just check my "more posts by" and its under my family project post. Let me know if you have any questions



Blake

I didn't use 2x4 I used 2 "C" channel's and welded them together like the stock frame. I extended mine in the middle.

Just check my "more posts by" and its under my family project post. Let me know if you have any questions



Blake

Wickenburg Huh? Small world :D

Wickenburg Huh? Small world :D



Yeah......too small! :flipoff2:


It got too crowded in Chickenburg, so I had to move way out to Morristown :D