...but am not too impressed. I have AP 5.5 springs in the front and their hysteer, and am very impressed and satisfied with the front lift and steering. In the rear however, I went the 63" Chevy route, hoping to get about 5", as I added a 2" Rancho AAL, 2" lift shackle, and had the front hanger about 1.5" lower. I netted about 8" of lift in the front (old springs were starting to arch the wrong way), and a wopping 1.25" in the rear:( Now my truck rides better but looks rediculous and forget about adding bigger tires. It leans to one side in the rear too. Are AP's rear springs 63"? If I could find another 63" spring that I could just bolt in I would be very happy. How long does it normally take to break in All Pro's springs and about how much do they sag?

I have the 1.5" longer 4" aps up front as well as Skys x-over and chevies in the rear. I know what you are talking about...high up front low in rear....
I did not want blocks and aals, I also had a dual shackle setup that I was unimpressed with. What I ended up doing was cutting the rear stock hanger off, without damaging it, grind the welds with a 4.5" cutter on the grinder and pry em off..next I welded on 2.5" rec. hitch tubing by 12" long flush with the frame (rear) then welded back on my stock hangers also flush with the rec. tubing. I got 2.5" from that and dumped the chevy hanger and kept my 6.5" eye-eye shackle..so I ended up with a tad around 3" and it came out perfect...level all around. This took me 5hrs start to finish and breaks n drinks.
I moved my shocks to the /\ style mounted on top of the axel and to a new upper brace that came out just right.
I would post pics but they still are being kicked back.

My new rear setup for the chevies, no double shackles!! and it rides smooth.

jpg.x2

i've been kicking the idea around of a drop shackle hanger, or I might just get AP rears. It's only $ right?:rolleyes: I don't know, right now the front is 6.75" higher than the rear, I can't drop it that much. If I used 2.5" like you did I would only get around 4". Looking at the springs, they must have really been beat on. Here's a pic:

i've been kicking the idea around of a drop shackle hanger, or I might just get AP rears. It's only $ right?:rolleyes: I don't know, right now the front is 6.75" higher than the rear, I can't drop it that much. If I used 2.5" like you did I would only get around 4". Looking at the springs, they must have really been beat on. I'll take more measurements later and see what I come up with. Anyone want to buy some Chevies? They'd be perfect on a stock pickup or runner becasue they'd level it out, and they ride sooo much better than your stock springs. I'd let 'em go CHEAP:D