Im getting ready to setup my x over steering on my Dana 60 with leaf springs and wanted to see what pitman arm everyone is using. I know that some are using the Skys 3/4 less drop arm but what else are people using? Can you use the stock arm?

I would use an aftermarket flat pitman arm reamed to accept the large Chevy draglink end.

I'm using a stock Toy arm. Cut out the tre and tig a sleeve in.

I want to use the stock arm if I can, and from what you say it will offer a long enuff throw for lock to lock steering with the Dana 60. Thats good to hear its always to save some coin when possible, are you using leaf springs or are you linked?

Leaf springs. I have Sky's fullsize kit. I"m currently using a 4" YJ main leaf and 5 stock FJ leaves for my front pack, but I think it sits too high and will be revamping them when I get some time.

cool, thanks for the info. Im on leaf springs in front and 4 link rear, What are you using for histeer arms? I think im going to get the Ballistic arms when I get around to it.

I had a friend whip a set out on the CNC when I was back on the east coast. they turned out pretty good for free.