Has anyone installed one? Or has my search failed?

http://www.petroworks.com/interior.php

Has anyone installed one? Or has my search failed?

http://www.petroworks.com/interior.php

x2, and how wide is it outside to outside?

:smokin:

X3 and does it eliminate the dam dash rattle?

I searched, but only found a few for sale or only a partial install :(

sheeit, you search "petroworks dash"? how about zuwharrie? rockrat's kimera build had lots of pics. google images turns up lots of pics, too. that dash with a nordskog panel will be in my junk by summer, it's been on the list for awhile.

Your dash rattles? what part of it rattles? Depending on where the rattle is coming from it may or may not fix it.

from the Izook link in the FAQ http://www.izook.com/tech/samurai/body/dash/pwdash.htm

I second what sambo said.....rockrats "kimera" build has a lot of pics.

I had completely forgot about the Petroworks dash kit. Hmmmm I guess I will add this to the list also.

Dave

i am really at a perfect point to cut out the factory harness and install the PW dash, but there is a caveat- dash $300 give or take w/shipping, no problem. gauge set with senders $400 and up... that's a $700 conversion. :( ...if you look closer it's easy to trace the tracks of my tears. :bawling:

Look at this thread from ZK.

http://www.zukikrawlers.com/showthread.php?t=20019

Zuks Off Road is gonna make some and the price and customer service with Myron can't be beat!!!!

Look at this thread from ZK.

http://www.zukikrawlers.com/showthread.php?t=20019

Zuks Off Road is gonna make some and the price and customer service with Myron can't be beat!!!!


dang it !! I HATE WORK BLOCKADES !!

I can't see it right now.......I will have to wait till I get home. Myron is top notch in my book. All around great person !!

Dave

here is one i just finished this week and i have 4 more going in this week, they are really nice well worth the money.

http://i35.tinypic.com/2daiums.jpg

ive also seen pictures of myrons from zor and they are not as beefy as petroworks but myrons is alot cheaper. Not flaming zor or anything all his products are badass.

mtbr_mark has one on his build thread page 2
http://www.pirate4x4.com/forum/showthread.php?t=715562

How does it attach?

My current dash is flat aluminum stock, which is bolted to the roll cage. I'm not sure if i even still have stock mounts.

it just bolts in the stock location.

Looks good 36zuk. Could you install any of the dash vents if you wanted to?

ya you can and you also have to cut out for your ac/heater controls, down here in florida we don't have any use for either one.

Pics HMMMM here you go
http://i10.photobucket.com/albums/a102/rockfab/kimera100.jpg

http://i10.photobucket.com/albums/a102/rockfab/kimera094.jpg

http://i10.photobucket.com/albums/a102/rockfab/kimera063.jpg

http://i10.photobucket.com/albums/a102/rockfab/kimera047.jpg

http://i10.photobucket.com/albums/a102/rockfab/kimera057.jpg

http://i10.photobucket.com/albums/a102/rockfab/kimera023.jpg

that was a neat build. the gauge pods and panels are straight up swanky. i mean that in a good way.