Any links to how this is done with pics would be great... Having some dificulty separating the steering shaft...

-SMART ASS <IMG SRC="smilies/usa.gif" border="0">

if it's two inch or lower you don't really haveto mod that much. To get the shaft off unbolt the end from the p-steering box then take the clamp bolt out at the top (if I remember correctly) where it goes to the u-joint cause it's got a groove for the bolt and beat way.

[ 10-28-2001: Message edited by: ToyFamily ]

Originally posted by SMART ASS:
<STRONG>Any links to how this is done with pics would be great... Having some dificulty separating the steering shaft...

-SMART ASS <IMG SRC="smilies/usa.gif" border="0"></STRONG>

Not sure about 92s, but on my 88 and 85 I had to drill out two pins that hold the shaft together.

The body lift should come with two more pins so you can drill new holes and put them in.