weekend started out great, took a shit in the middle and then came back around at the end.

Fri- Ran some shop errands, found a bargain discount store that sells rockstars for $1.29 a can. Slightly damaged, of course:D Got more settled into Team Fat Shit headquarters. I'm now the skinny, better looking member of Team Fat Shit :grinpimp: Hung out with NonPirateScouter.

Sat- Rebuilt NonPirateScouters steering box again cuz I jacked up an O-ring on the last rebuild. Major Screwup and I played with the diesel some more
http://i139.photobucket.com/albums/q318/terryd29601/200_1236.jpg
http://i139.photobucket.com/albums/q318/terryd29601/200_1234.jpg
http://i139.photobucket.com/albums/q318/terryd29601/200_1238.jpg
Yes, its shoved way back. The body mount thats under your feet is even with the last cylinder. I wanna build a trophy truck/class 1 car style center console. Insulate the hell out of it:grinpimp:
http://www.race-dezert.com/forum/attachment.php?attachmentid=43722&d=1220490004
Went to dinner with NonPirateScouter. Played some board games. All went to hell after that.
Sun- Slept in. Kicked around some crap, unloaded my scout. Figured out how to do it without hooking up the truck.
http://img222.imageshack.us/img222/4015/unload2011wd2.jpg
barely clears the hillbilly set up from way back when on the farm. Its going away real soon...
http://img517.imageshack.us/img517/4105/unload2021dn8.jpg
Got a free chunk of lexan from a buddy and got my new back window cut out. Gonna try and glue it in this week some time.

How say you?

Wheeled and watched ppl wheel my rig :smokin:

binder,any more pics of that dash? i'm looking to do the same type set up in my rig.i've done a bunch of aluminum dashes,just never the trophy truck look,realy nice btw

Finished up the wiring on my rig.

http://inlinethumb14.webshots.com/32269/2037610450102240836S425x425Q85.jpg (http://good-times.webshots.com/photo/2037610450102240836ovvXBB)

http://inlinethumb08.webshots.com/38535/2923954860102240836S425x425Q85.jpg (http://good-times.webshots.com/photo/2923954860102240836hwJiaB)

http://inlinethumb52.webshots.com/9843/2107567530102240836S425x425Q85.jpg (http://good-times.webshots.com/photo/2107567530102240836DddseI)

http://inlinethumb21.webshots.com/41812/2993682460102240836S425x425Q85.jpg (http://good-times.webshots.com/photo/2993682460102240836BrKHJd)

wheeled.


Blew up my 2nd rear driveline in 2 trips. All 3 u joints busted at the same time

Fri: Hit the junkyard for a new wiring harness/ecu fro my fuel injection. The current harness had one of the ground wires pull loose in at the plug and tried to catch on fire...

Sat: Went down and watched the OSU vs. Cal game. Go Beavs!

Sun: Did some duck hunting. Did some yard work.

Not enough hours in the weekend...

Spent 5 days wheeling the Hammers. Bent both rear springs, broke front and rear drivelines. Only pics I have right now.

binder,any more pics of that dash? i'm looking to do the same type set up in my rig.i've done a bunch of aluminum dashes,just never the trophy truck look,realy nice btw

Oh, that dash wasn't my doing. I lifted that off of RDC. That's the big Oly trophy truck build. I just used it as a visual reference. Aluminium dashes are cool but carbon fiber is the current direction dash direction.

Oh, that dash wasn't my doing. I lifted that off of RDC. That's the big Oly trophy truck build. I just used it as a visual reference. Aluminium dashes are cool but carbon fiber is the current direction dash direction.
so what happened in the "shit" category? Care to share.



No big happenings for me. Atleast nothing of IH note. Pretty typical of me as of late.

so what happened in the "shit" category? Care to share.



No big happenings for me. Atleast nothing of IH note. Pretty typical of me as of late.

I really don't want to get into it. We'll just say that I have a lot of free time now.

Worked a second job all weekend, trying to build up a pile of cash to dump into my D60F. I did take a couple minutes to pull the driver side knukle off.

I really don't want to get into it. We'll just say that I have a lot of free time now.
Shitty. Hope it all works out.

I really don't want to get into it. We'll just say that I have a lot of free time now.

Wait a minute... everyone has been telling me that time is money. Now you're saying that time is free? :flipoff2:

Drove several hours to Munster, IN for a motorcycle engine. the plan was to build a new frame for it, but I am thinking go kart power.:evil: Didn't do a damn thing sunday other than surf for go kart tech.

Hung around the house and got some home type shit done.
Searched for a local shop to rebuild my CTD trans, don't have the time or place to do it my self here.
Other than that just tried to rest for the shitty week I'm sure this will be.

Didn't wheel.......Probably won't wheel for a few weeks to come, I'm into maintenance/ upgrade mode now.....Spent much of the weekend first pressure washing the turd so it would be clean enough to work on then did some repair work to a new(used) set of cylinder heads that I hope to install this coming weekend.

Wheeled sort of...

For a Monday it turned out pretty kick ass. Scored a part time job making 15 an hour. Just found out were going back to OT at work and.... I just scored a 4x8x3/16 sheet of steel diamond plate for free.

Damn its good to be a gangster.

I have been on vacation since Tuesday last week. It's the first vacation I have had for about 3.5 years, so it's been really nice. I have spent the majority of the time in Milton Wa, where my girlfriend's niece was being born. We had a great time seeing her family and hanging out with her friends. Got home Saturday night and since then we've just been hanging out and enjoying our time off. Going over tomorrow to Dad's to work on the 100 buck truck, wish me luck!

Been web wheeling:flipoff2: Nothing scout related...:mad3:

Got invited to go to a gun show in Reno...drove to my friends house an hour away.. only to find out my he had the wrong weekend listed. Thank god he called Sat morning before we left town:shaking: Ended up using his neighbors log splitter and worked way too much :skull:

Worked a second job all weekend, trying to build up a pile of cash to dump into my D60F
Same here, I need a second job for scout $$

Same here, I need a second job for scout $$
hey brian,me too i ruined my engine....

i killed shit

got word when my h1 rims will be here

started welding in the new floor on my scout. Got the driver side mostly done. Once thats done that will tackle most of my rust issues...

when i got tired of that i set my motor in and tried to figure out were i wanted to put my new 350 motor mounts.

Needless to say i am along way from wheeling the scout. I went out and started my 72 travelall and got some mud on the tires but nothing my little ford ranger could'nt do.

Built the front of my cage and will add more tube as time/money permits :D I just have to plate/tube the frame side and connect it to the frame. I was going to do that last night but I got the parts for my FIL's Willies from Jeff. Almost done with that thing :shaking: I want my garage back for Scouts :(

Then night wheeled. DarrenY said "Lead and I shall follow" :evil: So after about 35minutes he could no longer turn right. Bigfoot came out of the brush (he claims I spit out a boulder we didn't see on the return trip) and turned his draglink into a boomerang. Hooked the winch to the draglink and babied it home under pressure.

Also changed my T-19's oil but I have some kind of bind at steep angles that make shifting a bitch. I need to check all my mounts I guess. If I get too far that 304 will disapear and my 345 with off-road carb/ignition will pop in.

Couple pics of saturdays fun


Big private property field+track hoe= FUN :D

awsome pics man.

worked on the 800,worked on the house and built me some heat for the shop

Made a day run over Disney, Ok. to test and tune a buddys buggy. I ended up between a large rock and a hard place. The rock won......but I got out with some minor sheet metal/bondo manipulation. Oh well, time for tube work on a$$ end now.

Stuck in shithole Anniston, AL... well, actually I'm staying in Oxford, but working in Anniston until Friday. Just my luck, it's actually colder here than it is back home in KC.

Saturday- installed my new brake booster and throttle cable then had got called into work.

Sunday- went to the test brakes things are better i can kinda stop but still puzzled since all wheel cylinders are good no signs of leaks etc. Still had to take a flex test on my buddies truck made it to the top of his 38's http://i114.photobucket.com/albums/n256/ogrescout/caving004.jpg