You need to put the pirate code in in-order to get the discount.


As you can see that it applies the discount, making the bender under $600.

We were doing work to the website this week. So depending on when you tried it. The website might have gave you problems. It should be all done. If you are still having problems, contact me an I will make sure your order is placed.

It is now working.. Thank you very much for your fast reply even on a sunday..

Taylor

maybe it's obvious and i just missed it but.. whats the difference between the package and just the bender?

looks like a grand to get this thing ready to bend one size tubing?

maybe it's obvious and i just missed it but.. whats the difference between the package and just the bender?

looks like a grand to get this thing ready to bend one size tubing?

With the package you get the base, ball valve mount, digital angle finder & die hitch pins.

I got mine in yesterday. It came very nicely packed. Very clean. Welded the base up and it is all sitting in the shop with a coat of primer on it. Thanks. I can't wait to use it. I will post a pic of when It is assembled. This is some nice quality work here.

I got mine in yesterday. It came very nicely packed. Very clean. Welded the base up and it is all sitting in the shop with a coat of primer on it. Thanks. I can't wait to use it. I will post a pic of when It is assembled. This is some nice quality work here.

Thanks for the kind words. Hope everything goes well. Let me know if you have any questions.

Rob

im looking to get a bender in the near future. i dont think i will ever bend anything bigger than 1 3/4" 120 wall, and if i do go 2" it will be thinner. would it be okay to get the pro3 or fork out the extra for the pro4?

thanks,
shawn

i also noticed the price for the base has been bumped up?

im looking to get a bender in the near future. i dont think i will ever bend anything bigger than 1 3/4" 120 wall, and if i do go 2" it will be thinner. would it be okay to get the pro3 or fork out the extra for the pro4?

thanks,
shawn

If you are going to spend the money on the 2" die it might be worth the opportunity cost for the pro4. One of your buddy's might want to have something bent and you can charge them that extra opportunity cost.

It is up to you but we only warranty up to 1 3/4" on the pro3.

i also noticed the price for the base has been bumped up?

Yes the price did go up but it is the same $599 for the Pirate4x4 guys if they use the member coupon code.

is your price cheaper than the one listed on pro-tools website for a complete package?

*The Complete Pro4 Package Includes : “The Brute” Pro4, 5/8" Plate Steel Construction, 17"/ 8 TON, Air/Hydraulic Ram, Self Retracting Arms, Bends 180 Deg., 2"-7"CLR, 1/2"-2" OD Dies, Accepts PRO Tool Model 105 & ProBender Bending Dies Sets, Bender Base, Digital Angle Finder, Ball Valve Mount & Your Chose of a Std. dies set. $1399.00

is your price cheaper than the one listed on pro-tools website for a complete package?

*The Complete Pro4 Package Includes : “The Brute” Pro4, 5/8" Plate Steel Construction, 17"/ 8 TON, Air/Hydraulic Ram, Self Retracting Arms, Bends 180 Deg., 2"-7"CLR, 1/2"-2" OD Dies, Accepts PRO Tool Model 105 & ProBender Bending Dies Sets, Bender Base, Digital Angle Finder, Ball Valve Mount & Your Chose of a Std. dies set. $1399.00

Their package comes with a choice of (1) die.

what are peoples takes on bending say a 10 foot tube with bends on each end with the vertical benders? how difficult is it to get your tube set just right?

Most guys think that it is easier.

Ask Bear:

http://i340.photobucket.com/albums/o358/Da_bear_2008/IMG_4242.jpg

I have carefully read this entire thread and looked over your web site and have become motivated to pull the trigger on a Pro 3 package, HSN-500 notcher, PN 531, MR 1-1/2 240 degree 5"cl die, 3N1DP digital protractor, & BEND-TECH EZ software. shipped to 92252. while my charming wife is still happy. (I had to spring for a family day at Disney Land... 'nuther story) Here's my questions...
1, can you send me a quote on the above (excluding Disney Land of course)?
2, Do I have to order this on line or can I call in the order & still get your super "Pirate 4X4" deal?
3, Your web site clearly says the shipped address must match my credit card. Because I live in the boonies, mail only comes to a PO box therefor my card addy is the PO Box. How can I order it then? UPS & Fed X will deliver to my home though...
Many Thanks from a soon-to-be beginner bender.

PM sent!!!

Got to bend up some tube with my new Pro3. I love this thing and don't think I will ever go back to bending horizontal .. Here are some pics..

http://i69.photobucket.com/albums/i57/tay1359/Sean2.jpg

http://i69.photobucket.com/albums/i57/tay1359/Sean3.jpg

Thanks for the kind words. So I see a manual bender in the back round of your picture. Am I going to see that on ebay next week??!!

Thanks for the kind words. So I see a manual bender in the back round of your picture. Am I going to see that on ebay next week??!!

Well, I try not to use eGay... But it is going up in the for sale section here in about ten minutes:D..

I call it Evil-Bay...

Where is my 4 diget code

If you are talking about the coupon code for the website? It is "pirate4x4"

So I have been doing a LOT of bending with my new pro3 and love it, but I am only getting about 65* on one full stroke... I am bending 1.5" with the jd2 pro3.. Know of anything that may be causing this?


Thanks,
Taylor

Not all die sets do 90* in one pass. It is determined by the CLR and tube size.

I was looking to order and I thought that I read the shipping was $55 + $45. Did I miss something in the thread? I am logged in on the site and the shipping and handling is $208 with one die, pro4 package and the bend tech pro software. Please let me know.

Dave

Dave-

I looked at your shopping cart and it is $127.38 for shipping and $47.50 for package/handling to AZ. That was for a Pro4 bender, die and software. I am not sure about the $208 that you canme up with.

So as you can see that we were losing money shipping a bender for $55 for and & dies$45 ea. This is the reason that we spent more money on a new shopping cart that can calculate the exact shipping cost.

I looked again and you're right. I added the discount and the handling. :grinpimp:

Well that is a pretty good discount for members if you know what I mean. $161.03 to be exact.

How about a Pro 4 with 1-1/2 and 2" dies with position stop. shipped to 75636 business.

you can get a quote from our website www.probender.com

How many degree bend can be accomplished in a single pull?

If I recall correctly, mine will usually do low 70s before spring back and when the ram maxes out. Just an easy removal of a pin and you can start bending once again :grinpimp:

How many degree bend can be accomplished in a single pull?

Depending on the dies size. The degree will be from mid 70's to mid 90's.

Why get a 240 degree die?

Why get a 240 degree die?

for bends over 180*

for bends over 180*

Thanks for the fast response :smokin:

Just ordered the PRO4 package, with the 1.75'' 240* die.

Christmas came early!

Thanks.

Just ordered the PRO4 package, with the 1.75'' 240* die.

Christmas came early!

Thanks.

Your order is going out tomorrow.... Thanks for the order..

so how fast is the air over hydro with good compressor? and how much faster will adding the electric/hydro make it? I am wanting to order one in the next week or so

so how fast is the air over hydro with good compressor? and how much faster will adding the electric/hydro make it? I am wanting to order one in the next week or so

The electric/hydro is faster no question. But speed is only going to help you if you have a programmable stop. Since you will have to sloe the electric/hydro down in order to read the degree that you want to bend. So unless you are planning to set up a stop for every bend, the electric/hydro is not worth the money. Because you could have a half a dozen bends done with the air/hydro in the time that it will take to set up the stop.

The dies are shipped from the mfg. right.

The dies are shipped from the mfg. right.

Yes they are.

The electric/hydro is faster no question. But speed is only going to help you if you have a programmable stop. Since you will have to sloe the electric/hydro down in order to read the degree that you want to bend. So unless you are planning to set up a stop for every bend, the electric/hydro is not worth the money. Because you could have a half a dozen bends done with the air/hydro in the time that it will take to set up the stop.



Thanks for the info. I will be ordering one with in a week and will let you know

Got mine put togeather in a few hours. Love the fact that it doesn't take up much space.

Got the die this evening. How does the block attach? Put it on one way, and it is too long. Put it on other way, and it interferes with the hold down for the tubing.

Got the die this evening. How does the block attach? Put it on one way, and it is too long. Put it on other way, and it interferes with the hold down for the tubing.

???? Can you PM me some pictures of what you are saying??? I want to help but you need to help me understand what you are having a question with. Please get the PM to me.

Sorry, I guess I was kinda vague. will shoot u PM this afternoon

This is the culprit.

http://i186.photobucket.com/albums/x150/Hondaddy/benderandsuperior002.jpg


http://i186.photobucket.com/albums/x150/Hondaddy/benderandsuperior003.jpg

http://i186.photobucket.com/albums/x150/Hondaddy/benderandsuperior004.jpg

I got on website to get quote. Very nice by the way glad to see the promo code worked.
Im a noob dont flame me yet...lol. Ive bent lotsa of conduit so Ive got the principal down but those types of dies are standard.
I have 2 questions #1 which die I need for what I plan to do with this bender I plan on doing mostly 1.5" x.125 wall on the 1.5" dies if I want to do a 180* like a shock hoop which die will i need the 110* or the 240* and the CLR center line radius. Correct me if im wrong a 5" clr die would be able to do a 10" 180*.
#2 On the bendtech 3d is this also calculating program where it figures how much pipe is needed to do a project ?

Thanks Thomas

would like a quote for the Pro 4 Brute with 1", 1 1/2",& 1 3/4" dies to Guam U.S.A. 96931

Talked with him today he is having trouble with site and is getting fixed just goto site and get quote or call them up. Thanks TMI for the answers I will be ordering mine shortly.....:grinpimp:

Probender.com

Thanks Thomas

Will the brute 4 bend pipe if the O.D. is 1 3/4''?

Will the brute 4 bend pipe if the O.D. is 1 3/4''?

I am back!!!! :)

PN#674, MP 1 1/2 PIPE, 1.9 O.D., 7" CLR, 240º, .058-.182

List Price: $375.00
Price: $356.99


This is the best that we can do with the Pro4

would like a quote for the Pro 4 Brute with 1", 1 1/2",& 1 3/4" dies to Guam U.S.A. 96931

Pirate members can only get there discount threw the shopping cart on our web site. So if you want the best deal start shopping. :)

This is the culprit.

http://i186.photobucket.com/albums/x150/Hondaddy/benderandsuperior002.jpg


http://i186.photobucket.com/albums/x150/Hondaddy/benderandsuperior003.jpg

http://i186.photobucket.com/albums/x150/Hondaddy/benderandsuperior004.jpg

After looking at the pic's I am not geting waht you are asking. Please give me a call... ??!! We can go over it. 763.315.5019 ext.112 I want to help...

Mine just arrived today, Waiting on die then I can bend some tube.

Thanks Thomas

just wondering if theres any holiday specials coming up...the wifey is lookin to get me set up with a bender but wanted to know if there are any deals coming up...she loves coupons...i already told her about the pirate member discount...she said there could be more...so at least i can say i asked!

just wondering if theres any holiday specials coming up...the wifey is lookin to get me set up with a bender but wanted to know if there are any deals coming up...she loves coupons...i already told her about the pirate member discount...she said there could be more...so at least i can say i asked!

Tell her to enter Coupon code: pirate4x4

I want this bender as it was designed to be mounted vertical and use a hydraulic ram.

I already have a hydro unit. I just need the "real" hydraulic cylinder that you sell.

Can this be ordered with the Pirate discount with the hydraulic cylinder instead of the air/hydro jack ram?

I want this bender as it was designed to be mounted vertical and use a hydraulic ram.

I already have a hydro unit. I just need the "real" hydraulic cylinder that you sell.

Can this be ordered with the Pirate discount with the hydraulic cylinder instead of the air/hydro jack ram?

Great Question....

We sell that bender as is. Meaning with the ram and all the thing that you will need to bend tube. If after you purchase our bender you want to modify it to suit your need thats great but you risk the factory warranty. In that regard we do not offer the bender an any other way then what we sell on our website. Please let us know if you have any other questions.

You guys have asked for it and here it is...

We are now selling the Pro32 that can bend 2" x .250 wall DOM tubing.

http://www.probender.com/pro32logo_450.jpg
http://www.probender.com/Pro32_Bender_Discription_450.jpg

YouTube - BENDING 2" X .250 WALL DOM ON THE PRO32 BY PROBENDER.COM (http://www.youtube.com/watch?v=StkQXyGXHa8)

You guys have asked for it and here it is...

We are now selling the Pro32 that can bend 2" x .250 wall DOM tubing. For a limited time I am going to sell it for $799.95 and I will be starting a new tread in order to have a drawing to win one a New Pro32.

http://www.probender.com/pro32logo_450.jpg
http://www.probender.com/Pro32_Bender_Discription_450.jpg

YouTube - BENDING 2" X .250 WALL DOM ON THE PRO32 BY PROBENDER.COM (http://www.youtube.com/watch?v=StkQXyGXHa8)

:smokin:

for bends over 180*

how the heck would you get the tube off the die if you made a bend over 180 degrees? doesn't seem to make sense to me...:confused:

how the heck would you get the tube off the die if you made a bend over 180 degrees? doesn't seem to make sense to me...:confused:they make 240 dies so yes you can use them or they wouldn't make them.
most tube doors use a 180* bend

2 questions

1. Why is the pipe sloped instead of level before bending?
2. Any clips of changing die sizes? Looks like a pain with the springs.

2 questions

1. Why is the pipe sloped instead of level before bending?
2. Any clips of changing die sizes? Looks like a pain with the springs.

1. Why is the pipe sloped instead of level before bending? That is the nature of the dies. Some bend level and some don't, so there is not a real good way to combat that. It seems that the Pro3 and Pro4 do a better job then the Pro32 at keeping the tube level.

2. Any clips of changing die sizes? Looks like a pain with the springs. I do not have any video of changing the dies but I will keep that in mind for the next time I shoot video. As for getting the die out with the springs. It is the same as the with out the spring since you do not pull the 1" pin completely out while changing the die.

1. Why is the pipe sloped instead of level before bending? That is the nature of the dies. Some bend level and some don't, so there is not a real good way to combat that. It seems that the Pro3 and Pro4 do a better job then the Pro32 at keeping the tube level.

2. Any clips of changing die sizes? Looks like a pain with the springs. I do not have any video of changing the dies but I will keep that in mind for the next time I shoot video. As for getting the die out with the springs. It is the same as the with out the spring since you do not pull the 1" pin completely out while changing the die.

So if I understand correctly, a 6.5" radius may sit level where a 5.5" radius might not. Tube size Being the same of course.

Correct, But for the most part there will be some kind of angle.

I have a dumb question. Why not move the main die pin out a little more, so you can center the arm pin holes so you don't push against the narrower side of the arms. Where the cylinder pin's and is pushing against.

I have a dumb question. Why not move the main die pin out a little more, so you can center the arm pin holes so you don't push against the narrower side of the arms. Where the cylinder pin's and is pushing against.

We wanted to keep the Pro32 as close as we could to the Model 32. Just in case you have to warranty you die for some reason. You will still be able to.

"Roger That" ...........Nice Bender by the way.

great bender!! Ill call you soon!
I have a few questions for ya

great bender!! Ill call you soon!
I have a few questions for ya

Let us know??!!

hey i just got my bender put together since things finally slowed down after the holidays. lemme know if you see anything wrong...ill be taking it back apart tomorrow to paint it...i also need to weld in the tab that keeps the ram centered at the base...i forgot it the first time around...

a thing or two that im wondering are:

im also wondering what the black piece with the screw in it is for that came with the bender...it appears to be a tube clamp of some sort...my guess was for using angle gauge...but wasnt sure so i figured id ask

i was also under the impression that the ball valve was included but you had to pay extra for the "ball valve mount". is this not the case?

as far as the dies go...i know that the long screw that comes with them is the one that gets installed into the main die and is used to secure the tubing in the u strap...but what is the purpose of the small screw...ive seen it put in the tab on the follower die...but cant determine the purpose...

my 1.5" die set came with two pins...the bender came with the 1" pin for the very top hole...thats it. it seems that im missing one pin for the follower...look below at the pic...the pin circled in red is the one im missing...

http://i292.photobucket.com/albums/mm13/clemsonjeep/Tubing%20Bender/MissingPin.jpg

http://i292.photobucket.com/albums/mm13/clemsonjeep/Tubing%20Bender/DSC_0700.jpg

http://i292.photobucket.com/albums/mm13/clemsonjeep/Tubing%20Bender/DSC_0697.jpg

hey i just got my bender put together since things finally slowed down after the holidays. lemme know if you see anything wrong...ill be taking it back apart tomorrow to paint it...i also need to weld in the tab that keeps the ram centered at the base...i forgot it the first time around...

a thing or two that im wondering are:

im also wondering what the black piece with the screw in it is for that came with the bender...it appears to be a tube clamp of some sort...my guess was for using angle gauge...but wasnt sure so i figured id ask

i was also under the impression that the ball valve was included but you had to pay extra for the "ball valve mount". is this not the case?

as far as the dies go...i know that the long screw that comes with them is the one that gets installed into the main die and is used to secure the tubing in the u strap...but what is the purpose of the small screw...ive seen it put in the tab on the follower die...but cant determine the purpose...

my 1.5" die set came with two pins...the bender came with the 1" pin for the very top hole...thats it. it seems that im missing one pin for the follower...look below at the pic...the pin circled in red is the one im missing...




Your Right. The Black clamp is a PPB tube clamp. I have been putting them in for free with the packages until the new year as a thank you for the successful year that we have had. So I hope you can get some good use out of it??!!

As for the missing ball valve & 7/8" Die pins, they should have been in the bolt box.If they are not there PM me and I will get you some out tomorrow. And I apologize for that. We had allot of orders going out right before Christmas and you might have some one else bolt box that did not order the package. It is hard for me to tell since most guy's only tell me if something is missing and not when I gave them something that they did not order. So again. PM me and let me know and I will get you them out in the morning.

FYI: Looks good...The bender looks ready for paint.

Your Right. The Black clamp is a PPB tube clamp. I have been putting them in for free with the packages until the new year as a thank you for the successful year that we have had. So I hope you can get some good use out of it??!!

As for the missing ball valve & 7/8" Die pins, they should have been in the bolt box.If they are not there PM me and I will get you some out tomorrow. And I apologize for that. We had allot of orders going out right before Christmas and you might have some one else bolt box that did not order the package. It is hard for me to tell since most guy's only tell me if something is missing and not when I gave them something that they did not order. So again. PM me and let me know and I will get you them out in the morning.

FYI: Looks good...The bender looks ready for paint.

Ryan-

After looking at your order it was under your mom's name (Linda not Ryan) and she only ordered the PRO3 HYDRAULIC BENDER (1/2" Plate Steel Construction) for you.
Details:
Includes: The Model Pro3 bender, 17" Air/Hydraulic Ram, Bolts, Hardware and Assembly Instructions. (Base Kit (needs to be welded & assembled), Ball Valve Mount, Digital Angle Finder and Die Sets are "NOT" include in the price). So this is the reason that you did not get the die hitch Pins and the ball valve mount (Ball valve mount includes ball valve).

If you would like to purchase the die hitch pins and the ball valve they can be found here http://www.probender.com/products.asp?cat=26 on our website. Hope that clears everything up for you. PM me if you have any questions.

Nice Bender It works really well. This is my first bender so I really don't have much to compare it to. 2 things though that I replaced. 1st the base is made out of really thin square. I ended up just making my own out of heavier square stock. 2nd the bender come with grade 5 hardware. I replaced all the hardware with Grade 8 from Tractor Supply for $21.00

Glad everything is working out for you.

Hello
Newbie here. Looking for a machine to bend 1 3/4 .095 tubing mild or DOM for roll cages. What is my best bang for the buck machine and what die would you suggest? I dont know if I need 7' CLR or 6" CLR? If I need 110 or 240 degree dies?

Also, I am in Blaine. Can I use my pirate4x4 discount if I come and pick up a machine?

Your machines look awesome and I am looking forward to a purchase.

thanks steve
acme racing

Hello
Newbie here. Looking for a machine to bend 1 3/4 .095 tubing mild or DOM for roll cages. What is my best bang for the buck machine and what die would you suggest? I dont know if I need 7' CLR or 6" CLR? If I need 110 or 240 degree dies?

Also, I am in Blaine. Can I use my pirate4x4 discount if I come and pick up a machine?

Your machines look awesome and I am looking forward to a purchase.

thanks steve
acme racing

If you are looking to do 1 3/4"? The best bag for your buck is the Pro3 that will do that no problem. As for the Die, Most guys go with the 240* w/ 6" CLR for the application that you will be using it for. Hope that helps. If you want you can contact me ("Rob") at 763.315.5019 and I can go into more detail with you about what bender and die that you should choose. Look forward to working with you.

Attention:

We are no longer offering the 12% Pirate discount and the new starting price on the Pro3 is $679 effective 2/1/2010

Are you going to be running any tax return sales? I'd like to get a bender and some dies with my refund cabbage, but it looks like I missed the Pirate deal. Thanks.

well im home for a while and i missed the sale when i was over seas but i was wanting to know how much for the BRUTE with everything i need to make it work including 1.5 and 2 inch dies, sorry im new to benders that is why i say with everything i need to make it work. thanks for your time

Are you going to be running any tax return sales? I'd like to get a bender and some dies with my refund cabbage, but it looks like I missed the Pirate deal. Thanks.

Sorry, We do not have anything planed for a tax return sale...

well im home for a while and i missed the sale when i was over seas but i was wanting to know how much for the BRUTE with everything i need to make it work including 1.5 and 2 inch dies, sorry im new to benders that is why i say with everything i need to make it work. thanks for your time

The Pro4 package will give you everything that you will need except for dies. Then just add the 2 dies to the order. The shopping cart on our website will get you an up to date quote shipped to you.

Thanks Robert will give it a try.

I just got a pro3 from Robert the other day and it arrived a few days later. I like how I can roll it around in my garage and I can put a digital angle finder on it and go to town. Awesome bender. I can't wait to use it. Thanks Robert!!!

I just got a pro3 from Robert the other day and it arrived a few days later. I like how I can roll it around in my garage and I can put a digital angle finder on it and go to town. Awesome bender. I can't wait to use it. Thanks Robert!!!

Glad to see that you are happy. If you have any question please feel free to call.

Just like a Tube Shark but smaller and a few thousand cheaper :smokin:

Being able to roll it around easily is priceless when you have a small workspace!

I bend mostly square with it :D ,

http://i723.photobucket.com/albums/ww232/FRIZZLEFRY_01/Random%20junk/KOH003.jpg
http://i723.photobucket.com/albums/ww232/FRIZZLEFRY_01/Random%20junk/KOH006.jpg
http://i723.photobucket.com/albums/ww232/FRIZZLEFRY_01/Random%20junk/KOH005.jpg

http://i723.photobucket.com/albums/ww232/FRIZZLEFRY_01/Random%20junk/KOH023.jpg

This is a great tool!

Thanks a lot TMI :D

FRIZZLEFRY-

Those look SWEET....:cookie: I want a setup for my 4runner!!:D All I can say is you do nice work! & Thanks for your kind words.

Rob

Probender is coming out with the new Pro5 bender. The Pro5 is a one piece construction and will have 2.5" tube capacity. We are now taking pre-orders so give me a call to find out all the other features that we added to the Pro5.

Question,I have the choice of 240* dies and 110* dies and they seem to be the same price.Why would I choose 110* dies?Am I missing something?

All I need to pull the trigger on this bender is to deside what degree dies to get.

I'd like a quote on a 32 package with 1-3/4" and 2" round tube dies and 1" square tube dies.

thanks

Question,I have the choice of 240* dies and 110* dies and they seem to be the same price.Why would I choose 110* dies?Am I missing something?

All I need to pull the trigger on this bender is to deside what degree dies to get.

I'd like a quote on a 32 package with 1-3/4" and 2" round tube dies and 1" square tube dies.

thanks

Not sure where you are getting prices on the dies but we do not sell dies for the Pro32. We only sell the Pro32 bender.

If you are looking for a price for the bender shipped to your door than go to ProBender.com and you can get a quote there to your address.

Not sure where you are getting prices on the dies but we do not sell dies for the Pro32. We only sell the Pro32 bender.

If you are looking for a price for the bender shipped to your door than go to ProBender.com and you can get a quote there to your address.

I'm sorry I thought thats why you were here.The 32 don't use the same dies??I chose the 32 because it had 3/4" plate and I don't want to limit my bending options.so your just pimping the 3,4 and 5??

OK I went to the site.Now I see the error of my ways.School me on the new pro5...Whats the price? Does it use the same dies?Can you send me a quote as mentioned above substituting the 32 for the pro 5?

Shoot me a PM with your info and I would love to get you out a qoute for the Pro5 or the Pro32.

Shoot me a PM with your info and I would love to get you out a qoute for the Pro5 or the Pro32.

Looks like I'll need to call.Sorry to bother you.
-Kerry

Looks like I'll need to call.Sorry to bother you.
-Kerry

Kerry-

It is not a problem to get you out a quote. I just wanted to let you know that you can get a detailed quote on-line through our on-line store 24/7 for the Pro32 and that we do not sell the dies for the Pro32.

Hope this clears up any confusion that you might have? Feel free to give me a call on Monday if you have any more questions.

Have a great day..

pm sent.

Just tried to buy stuff on your sit but couldn't add to cart:confused:....Is some one trying to tell me something?

It is a problem with the server. GoDaddy is working on it as I type. Sorry... I will PM you when it is fixed...

Go Daddy apologies for the inconvenience. Our shopping cart is back up and running.

Again sorry for the inconvenience.. I Made sure that Go Daddy understand that I was not happy that my customer where inconvenienced in there shopping experience. :shaking:

Let me know if you need any help...

Go Daddy apologies for the inconvenience. Our shopping cart is back up and running.

Again sorry for the inconvenience.. I Made sure that Go Daddy understand that I was not happy that my customer where inconvenienced in there shopping experience. :shaking:

Let me know if you need any help...

So um,this go daddy,does he send shipping confirmations with tracking a tracking number??I see the site has a really nice order tracking button with a FedEx link I'd like to try.:D

It should... Have you tried it???

It should... Have you tried it???Go daddy hasn't sent me a fed ex tracking # just a probender order # and the order # does not work

Never mind,got he email today.Thanks.

Good to see that you are getting the emails. Let me know if you have any more questions. Thanks you for choosing our product.

OK I'm confused.I got two packages.One was the bender parts the other was the jack.I have only one tracking number (received it in an email yesterday) No dies have shown up nor do I have a tracking number stating they have even shipped .Did you drop ship the dies??why wouldn't they have shown up with the rest???.....

Kerry-

Yes! The dies are drop shipped from Pro Tools. A email was sent to your email address with the tracking information. In case you did not get it there? Here is is for you again.

Number of Packages 5
UPS Service: GROUND
Weight: 187.3 LBS

Tracking Number: 1ZE324640355945930

My apologies,didn't see the fine print at the bottom.You're are right about the package too ....got confused reading and hopping around the site with the different benders.I'll delete my slanderous posts.
-Kerry

Was wondering how much the Pro 3 Bender is for us on Pirate? Sorry if I have missed this along the way. I am totally new to bending but would like to give it a try. How do I know what CLR to buy? Also 110 or 240 deg die? I plan on trying to make a little buggy for off roading or maybe some go kart frames. Thanks for your time.

Gord

Was wondering how much the Pro 3 Bender is for us on Pirate? Sorry if I have missed this along the way. I am totally new to bending but would like to give it a try. How do I know what CLR to buy? Also 110 or 240 deg die? I plan on trying to make a little buggy for off roading or maybe some go kart frames. Thanks for your time.

Gord

Gord-

Most guys go with the smallest CLR that they can and 240* dies. If you let me know what tube you are planning to use I can recommend a die for you.

is that special price on the pro32 still valid? i think it's time to get a real bender.

The price is on the web. http://www.probender.com/proddetail.asp?prod=127

Tell her to enter Coupon code: pirate4x4

I typed in pirate4x4 and it told me "coupon not available"

Sorry but we do not have any promotions going on right now.

A promotion on the Pro32 or Pro5 would make my decision on which bender to buy a lot easier...is there anything in the forseeable future?

A promotion on the Pro32 or Pro5 would make my decision on which bender to buy a lot easier...is there anything in the forseeable future?

The Pro32 and Pro5 are not going to go on sale any time soon. They are priced way lower than the competition and they are a far supplier bender to what is on the market. Hope that makes your decision easier....

...

We are now offering a water soluble / echo friendly bending lube.


8 oz Bottle $12.95
16 oz Bottle $22.95

We have benders in stock and ready to go!! Same day shipping on the Pro 3 and Pro4...

BigBlackJeep, PM sent.

Attention!!!
Our Pro3 benders are now made with 1/2" thick plate steel and the new starting price is $679
Please visit our new website for details: http://www.probender.com (http://www.probender.com)

We are new here at Pirate4x4.com and looking to earn your business. We have been recommended and urged by Bend Tech and the 12voltguy.com to become a vendor on pirate4x4!! They feel that we have created a product that fulfills a niche in this market. Before checking out the video here are some points on why we feel our product stands out form other benders on the market:

1) Does a 90 degree bend without pulling a pin. (on most dies) This bender will do 180 degree bends with dies that are made to do 180 degree bends only.
2) Hydraulic ram
3) Can work with or without air compressor
4) Vertical bends taking up less room in the shop
5) Accurate with in 1/2 a degree
6) Smaller foot print then a moving dolly
7) Movable if so desired (no need to bolt it to your floor)
8) Retractable arms
9) Accepts both JD2 or PRO TOOL dies
10) Automatic stop (coming soon!!)

http://www.probender.com/Bender yellow backround (Large)_small.png

Watch our bender in action!! Just click on the link!!

YouTube - Pro 4 Tube Bender From ProBender.Com (http://www.youtube.com/watch?v=NqGiqCCZQR8)

New 4,000 PSI Electric/Hydraulic Pump & Ram Package for the ProBender Benders

Now for only $999.95 extra you can order your Pro3 or Pro4 with the 4,000 PSI Electric/Hydraulic Pump & Ram Package. So for the guys that don't want to run the bender with air you can just plug it into the 110v wall socket.:D With this addition we know that you cannot find a better bender on the market for the money. Period.

http://www.probender.com/Power-Unit--Package.jpg

To add the 4,000 PSI Electric/Hydraulic Pump & Ram Package your bender order? Just check it as an option that you want for your new bender.

You guys have asked for it and here it is...

We are now selling the Pro32 that can bend 2" x .250 wall DOM tubing. For a limited time I am going to sell it for $799.95 and I will be starting a new tread in order to have a drawing to win one a New Pro32.

http://www.probender.com/pro32logo_450.jpg
http://www.probender.com/Pro32_Bender_Discription_450.jpg

YouTube - BENDING 2" X .250 WALL DOM ON THE PRO32 BY PROBENDER.COM (http://www.youtube.com/watch?v=StkQXyGXHa8)

Ok so I going to bust your balls a bit here as I spent an hour reading this whole thread last night.:flipoff2:

Prices. Is the above prices still in effect? It's different than the website :confused: Unless thats a red star member price you have posted.:grinpimp:

Red star bender die discounts. I see you already offer a 10% discount on the website over retail for Protool dies, but reading here the Pirate4x4 discount bumps that to a 15% discount:smokin:

I guess that brings up the next question, the probender 32 uses only JD2 32 dies correct?

The Pro3 is on ebay for $679.95. That is what we sell it for on there and there only. We are going to have a Oct. special that will be a great deal if you are looking into a bender.

As for the Die question. "No" The Pro-Tools Dies will not fit the Pro32. They will only fit the Por3/ Pro4/ Pro5.

Any questions please feel free to give me a call.

FYI: We are looking at extending our Phone hours to 10-7 PM CST M-F for guys on the west coast.

"October Blow-Out speacial's" updated on our website.

To go to our new special's page.
(CLICK HERE) (http://www.probender.com/products.asp?cat=25)

PRO3 Package Includes:
-Pro3 Hydraulic Bender
-1 1/2" -or- 1 3/4" Standard Die Set
-HSN-500 Racer Model Tube Notcher
-Bend Tech - EZ Tube Bending Software
All For Only! $1099.95


PRO4 Package Includes:
-Pro4 Hydraulic Bender
-1 3/4" -or- 2" Standard Die Set
-HSN-500 Racer Model Tube Notcher
-Bend Tech - EZ Tube Bending Software
All For Only! $1299.95

Get them while supplies last!




-

Thank you for all the PM's about the shipping was not calculating right on our shopping cart. Just wanted you to know that it is fixed now and should give you the right shipping quote. It should be around $70-$100 inside the US. If you are getting a freight quote please send me a PM so I can have that fixed.
Thanks again for bring that to my attention.

Rob-

PM Sent. Keep the PM an inquiry's coming!

Less than 2 week left in our October Special! Don't miss out!!!

PM sent!

deange- PM Sent!

hi, i was wondering if a tube bender could be used for exhuast pipe or an exhaust bender for tube.
thanks

You can use the bender on exhaust as long as the tube meets the Minimum thickness of the die that you are using. All that information is on our website. Probender.com

This is the last week of the October spacial... Don't miss out before prices change!!:D

"November Blow-Out speacial's" updated on our website.

To go to our new special's page.
(CLICK HERE) (http://www.probender.com/products.asp?cat=25)

PRO3 Package Includes:
-Pro3 Hydraulic Bender
-(2) Standard Die Sets / Choose from: 1" - 1 3/4" Round Die
-Bend Tech - EZ Tube Bending Software
All For Only! $1299.95


PRO4 Package Includes:
-Pro4 Hydraulic Bender
-(2) Standard Die Sets / Choose from: 1" - 2" Round Die
-Bend Tech - EZ Tube Bending Software
All For Only! $1499.95

Get them while supplies last!

I will be calling about a Pro4!!!!

I am in the office all day. Look forward to your call.

Pro 4 package shipped to 81625 or maybe pro 4 with 1 3/4 dies? Thanks

Pro 4 package shipped to 81625 or maybe pro 4 with 1 3/4 dies? Thanks


Not sure but you might want to check out our November speacials...

http://www.pirate4x4.com/forum/showthread.php?t=928838

As for a quote you can now get it on our website with out logging in.:beer:

Are there any bushes in theses benders main pivot or is it metel on metal?

No...there are no bushings on the Pro3 & Pro4 main pin. We have them on the Pro5 only. We have not found a need to use bushings when the main pin for the Pro3 & Pro4 is less then $10 to replace.

http://www.probender.com/BLACK-FRIDAY.jpg

We hope everyone has a Safe and Happy Thanksgiving!

This is your last day to get your 25% "Everything" in the store.. Don't miss it..

Are you going to be offering any Christmas specials or after xmas stuck between a got trikes and the pro 4 or 5. I wish i would have seen this add b4 the cyber monday special was over.Also is the 32 model the only that can bend 250 wall ?

The Black Friday was a one time deal. I don't see that kind of discount coming until the same time next year.

Yes the Pro32 is the only one in our line up that will bend over 0.134" wall.

the pro 105 brute what is the max thickness it will bend also is there any package deal for the pro32 like you offer for the other benders

We are not having any deals on the Pro32. We only package are on the Pro3 and Pro4 since we sell die for them. We do not sell the dies for the Pro32. Sorry!

what is the max thickness the pro 4 will bend

what is the max thickness the pro 4 will bend

2" OD x 0.134 wall

Thanks for all the orders and they will all be going out by Dec.22. But remember that the December sale last until New Years.. So don't miss out!

2 Days left on our holiday specials.

http://www.probender.com/2011.jpg

I'm planning on tubing alot of my crawler this summer and am in need of a tubing bender. This will be my first time using a bender and am pretty sure I will be using 1-3/4 chrome moly tubing for the beltline and rocker on this rig as I bash it pretty good here in arizona. There's getting to be nothing left of my jeep tub! So, I was wondering wich bender you recommended. I was think of the Pro3. What are your thoughts?

Thanks for your time,
Jim

It sounds like all you need is the Pro3 but the Pro4 is nice to have if you plan on bending any 2" tube. Let me know if you have any more questions.

Thank you.... What would be the total cost for this bender w/die?

You might want to look at our $1299 package deal.

http://www.probender.com/proddetail.asp?prod=111

On the first page of this thread the Pro 3 is listed for $600, but they are almost $900 on your web site. Are you just giving that much of a discount for Pirate members? I guess what I'm getting at is I am in need of a new bender, and would like to know what a Pro 3 would cost shipped to a business addy at 48146.
Thanks in advance, Keith.

Keith-

We used to sell the benders with out the base and stuff. But now that is all included. You can still find one on eBay that does not come with the base for around the $600 range.

Keith-

We used to sell the benders with out the base and stuff. But now that is all included. You can still find one on eBay that does not come with the base for around the $600 range.

Gotcha. Thanks for the info.

FYI:
We are out of the old benders and all the new benders (in stock)that will ship will be the 2011 bender. Sorry for the late posts. But the new bender are the $hit. Just got done with the video. Hope to post soon

The New Limited Edition Pro4 In Action


YouTube - New 2011 Limited Edition Pro4 from Probencer.com (http://www.youtube.com/watch?v=7nn-aVLmo3g)

Only 25 LE Pro4's are available! Don't miss out!

PM sent you can also get real time shipping quotes online at www.probender.com

PIRATE4x4 coupon code still good? If not, any others available? I'll PM you what I'm looking to purchase if that helps. Yes I see the quote online but the codes doesn't work for me. :smokin:

PIRATE4x4 coupon code still good? If not, any others available? I'll PM you what I'm looking to purchase if that helps. Yes I see the quote online but the codes doesn't work for me. :smokin:

We do not have any codes as of right now. You don't need them now that we dropped the price on the Pro3 from $879.95 to $499.95. That beats any code that we ever had. :smokin: Look forward to your order and have a great day.

Still great prices! I just pulled the trigger on my order and even stepped up to the Pro Bender4 setup. :grinpimp:

Looking forward to getting it, building it and using it Rob. Thanks! :smokin:

Got mine, got it together and already bending tube!!!!

http://i268.photobucket.com/albums/jj7/moab_06/IMAG0191.jpg

Just a thank you to TMI for quick shipping (great packaging, not a ding or broken box when it got here) and great service. Quality product, easy to put together and everything fits perfect!!!!! :grinpimp:

Only recommendations I could make:
- Better instructions. The pics are great and fairly easy to understand, but some descriptions would be nice too. More of setting up the die and its related parts as well. I figured it out, but some tips there would be good.

- Some basic bending tips included. I printed out what I could find on the net, but some included would have been nice.

- and add some additional stickers. Sounds minor, but I woulda liked to put stickers on both sides of the bender. :D

- a free t-shirt with purchase :flipoff2: nice white large t-shirt with larger probender across the back and a little logo on front would be nice......

Thanks again, a great product that should last me a looooooooong time! :smokin:

David

PM sent

Pat-

PM Sent.

Appreciate it Rob. Order has been placed. I can't wait for the tube bending fun to begin. :D

Rob me and the boy did our first bend on the Pro4 today and it works great man!

Yes we painted it bright orange to match the ram. :grinpimp:

Thanks for the great kit at a great price!

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/188386_1896967312724_1497857348_32160650_2043990_n .jpg

Glad you like the new Pro4 LE..

That looks like a Home Deopt Ridgid bender with the ordange color.

price on a Pro32 w/stand and ram shipped to 98503 thanks

Price on pro 32 w/stand and ram shiped to 98513. Thanks

By any chance you going to have any sales coming up?

price on a Pro32 w/stand and ram shipped to 98503 thanks

PM Sent!

Price on pro 32 w/stand and ram shiped to 98513. Thanks

By any chance you going to have any sales coming up?

PM Sent!

We are not planing on having any sales until next fall.

Is it same price for shipping to business and home residence? Cost for pro3 and 1 5/8 6" clr die to 98942 residence. Have a stand and ram already. Thanks

Same price for business or residence. The box is over 70 lbs. You can get a real time shipping quote on line at www.probender.com..

Thanks for looking..

Will the pro3 bender handle bending 2" .120 wall on occasion? I currently have a set of protools 2" dies and I am thinking of buying a pro3.

Pro3 will do up to 1 3/4" and the Pro4's will do up to 2". So you will need to pick up a Pro4 if you are looking to bend 2" .120 wall.

Do you have any package deals?

Not at this time. We normally run them right before Christmas.

I purchased one of these a while back and love it. Have you developed any kind of degree ring for it? I just looked through your site and did not see anything for a simple degree ring. I saw you have a new multi stop item but at $600 I don't bend enough tube to warrant it. Thanks, great product regardless!

The Pro Tools ring will fit our Pro3 and Pro4 benders.

http://www.probender.com/proddetail.asp?prod=704

Pricing on a Pro4 with base (no hydraulics) with 1-3/4"x6"x240 degrees die shipped to 94952

You can get a real time quote on our website. We do not PM pricing. No need since you can get it on our website.

PM Sent

Bringing this back up, just placed an order for a Pro4 brute with ram and stand along with 1-1/2" and 2" dies. Really looking forward to getting it and putting it to work.:smokin:

Got your order. The bender will go out tomorrow....

Just wondering when/if you plan on running a holiday special. I am ready to buy the pro3 but waiting to see what deals you may come out with.

x2

We might have a black Friday deal. But, that is all I can see on the schedule. It only looks like a package deal. With dies and software. So if you are only looking at the bender? Any time is a good time to buy.

I would need 1 3/4 180* die as well and wouldn't mind the software if it is a package deal. I will keep watching. I am debating buying a notcher too. Thanks

The notcher is in with it. I am sorry..

Just got my bender in today and it's assembled with paint drying on it now. This thing is STOUT, I allmost feel bad for the poor Fedex guy:laughing:.

Just waiting for the dies.

I'm not trying to be pushy or anything since I'm in no rush, but I was kind of curious. I didn't get a shipping confirmation for the dies like I did for the bender. I was wondering if that's because they're being shipped from a different company?

Scheduled Delivery: 25-October-2011
I will PM you the tracking number again. Have a great weekend.

Scheduled Delivery: 25-October-2011
I will PM you the tracking number again. Have a great weekend.

Thank you, I'm glad that I'm buying from a company that takes the time to keep me updated.:smokin:

Have yourself a great weekend as well.

Im looking to get the ball valve and mount. I found the ball valve mount (BVM) on your site, does that come WITH the ball valve?

PM Sent

The price for the Pro4 & the Pro4-JD2 starts at $699 w/o base. $799 w/ base. The shipping inside the US is a flat rate of $55.

Went to the website to order and it's got shipping at like 85 bucks to my address. Is there a discount code i'm missing somewhere in this thread ?

Thanks
Mike

Went to the website to order and it's got shipping at like 85 bucks to my address. Is there a discount code i'm missing somewhere in this thread ?

Thanks
Mike

That was what the cost was back in 2007-2008. The current price is what the website states. I have deleted that post from this tread. Just in case it causes any confusion.

Note: We do not have any codes right now on the benders.

Let me know if you have any more question.

Thanks Rob-

Just ordered mine. Shipping is crazy high, but gotta have a vertical bender.

Just wondering if you are going to have that Black Friday deal?

x2 on the black friday deal, I pm'ed you earlier

X3 on black friday deal?

I need to order a couple of bending dies. Hopefully someone is having a sale on these this week.
I bought a Pro4 bender last year and 3 dies during the Black Friday sale.

Sorry guys-

We decided this year since we sell our benders at a great price everyday. That there is no need for a Black Friday special.

Rob

Got it painted and put together, here's a look at the dry run....

Thanks Guys
Mike


http://youtu.be/dRoQ0t3y-8k

Hey can we call it big green! Looks great! Now we need to see how well it bends. Do you have more memory and a camera? Love to see it.

Oh yeah, i'll get another video up when I start bending tube. I do have a question for ya. How in the hell did you guys mount the ball valve. That dumb ram came with a push valve so I went to the hardware store and got a ball valve for 9 bucks. Just need some ideas on how to mount it. If you have some pictures of just the valve mount please post up.

Thanks
Mike

We mount the ball valve on the operate arm in the 5/8 hole. We take a 5/8 bolt and weld a small piece of tube to form a T. Then we used to hose clamps to secure it.

http://www.probender.com/prodimages/BVM.jpg

Hope this helps!

Oh God ! LOL.....That's some shit I would have came up with anyway LOL....That's easy enough...Thanks Man.

Just got a Pro bender 4 for xmiss lol well I did not get any dies where do I get them? And for a good price.. Or a used set... 1 3/4"
Thanks

I am not sure where you can get a used 1 3/4 die set. But you can go to our website. Here is a link http://www.probender.com/search.asp?pg=1&stext=536&sprice=&stype=&scat=

iv tryed calling and its just busy all day?? whats up with that TMI? lol

Tis the season. I have been on the phone all day long. My ears are sore. E-mail me your number and I will get back to you in the morning or evening yet tonight. I am sorry but we only have so many lines coming in. Again send me an e-mail with your information and I'll be sure to give you a call later today or first thing in the morning.

Note. We're on central time. So if you are on the West Coast it will be a wake-up call.

rob@team-moto.com

Again I am sorry for the busy signal but it has been one of those days.

Rob

Hey Rob, I bought a bender (3/8" plate) from you a few years back and last month accidently pined the die in the leg of the bender and not the arm.:( Tweeked the legs out a little but still bends. Anyways i was wondering if i could just order the legs of the bender? Thanks in advance for any help you can offer me. James

Also just wanted to let anyone know if they are looking to purchase a tube bender, just get a Probender. I can bend with one arm tied behind my back and do it twice as fast than my buddy can on his air over hydrolic horizontal bender.

mr2thomas: PM Sent for a Pro3 to 90680

I looked today and all I could find was the 1/2" up right. I can get you that one right away or I could have 3/8" cut special what is going to cost about twice as much. E-mail me and I can get you pricing on both.

Thanks for the good word...

Rob

Hey Rob, I bought a bender (3/8" plate) from you a few years back and last month accidently pined the die in the leg of the bender and not the arm.:( Tweeked the legs out a little but still bends. Anyways i was wondering if i could just order the legs of the bender? Thanks in advance for any help you can offer me. James

Also just wanted to let anyone know if they are looking to purchase a tube bender, just get a Probender. I can bend with one arm tied behind my back and do it twice as fast than my buddy can on his air over hydrolic horizontal bender.

Would someone who owns one of these benders take a measurement for me? I'm wondering how high off the ground the pivot for the die is? What's a good working height? I notice the got trikes job is pretty low. The stand for a regular JD2 is 36". Thanks, Jeff

Working height is 32" to 36" depending on the CLR of the die.

ok this may be a stupid question but im 17 and still learning, you said anything over 120 psi will hurt the bender, My main compressor at home is a 80 gallon ch with like 190 psi , I have split off air lines in my shop all with individual regulators, so If i wanted to use this I would just hook it up too a split off line and turn the regulator down too 120psi and it will work correct?

;) you got it... There is no benefit to running more than 120 PSI. All you are going to do is blow out the seals. The Bender will not go any faster. Hope this helps.

awesome will be ordering one of these in the next week or two for my 18th birthday present!

What would the price be on a Pro 4 with the foot pedal and the ram shipped to Wisconsin 54311?

Or if anyone has a used one they want to sell let me know.

I heard these things are the best!!

Are you looking for the Pro4 or the Pro4 LE w/ foot pedal..

Here is a link to both. Let me know. While you are there you can get a qoute if that is easier for you.

http://www.probender.com/products.asp?cat=16

Rob

What would the price be on a Pro 4 with the foot pedal and the ram shipped to Wisconsin 54311?

Or if anyone has a used one they want to sell let me know.

I heard these things are the best!!

Whats the Diff between the Pro4 and the Pro 4LE, and also the Pro32?

Here is a Comparison Chart

http://probender.com/probender/bender/sites/default/files/Comparation_Chart_New.png?1316025367

Which one would you recommend for building rollcages using 1 1/2" OD .120 wall?

Pro3 or the Pro4 is all you are going to need.

Which one would you recommend for building rollcages using 1 1/2" OD .120 wall?

Quote please

PRO4 LE
10,000 PSI Air Hydraulic Foot Pump w/ Hose
Base/Stand
1.75", 1.25" dies @ 240 degrees
Shipped to 99208 Spokane, Wa

PM Sent.

Quote please

PRO4 LE
10,000 PSI Air Hydraulic Foot Pump w/ Hose
Base/Stand
1.75", 1.25" dies @ 240 degrees
Shipped to 99208 Spokane, Wa

Yes you need the foot pedal with the Pro4 LE.

Your website says the foot pedals are out of stock. When do you plan on getting more back in?

The Air foot pedal (Yellow) is out of stock. The Air/Hydraulics for the Pro4 LE we have plenty.

Price on a pro 3 that uses jd-2 dies shipped to 95963
Thanks, Dustin

We do not offer the Pro3 that works with the JD2 dies. We only offer it in the Pro4-JD2 version (Accepts JD2 Model 3 Bending Dies)or the Pro32 version (accepts the Model 32 bending dies).

Here is a link to both:

http://www.probender.com/proddetail.asp?prod=103

http://www.probender.com/proddetail.asp?prod=128

While you are on our website you can get a real time shipping quote to 95963

Thanks, Rob

Can I get a quote.

PRO4 LE
10,000 PSI Air Hydraulic Foot Pump w/ Hose

1.75" die @ 240 degrees I want a kinda tight bend so a 6 CLR?


Shipped to 63080 Sullivan MO

PM sent

Can I get a quote.

PRO4 LE
10,000 PSI Air Hydraulic Foot Pump w/ Hose

1.75" die @ 240 degrees I want a kinda tight bend so a 6 CLR?


Shipped to 63080 Sullivan MO

Quote for:
Pro4 and yellow foot pedal
shipped to 75019

I can PM you a quote but have you visited our new website? We have a Pro4 special going on.

Quote for:
Pro4 and yellow foot pedal
shipped to 75019

how much for a pro 3 or pro 4?? W/ ram stand and 1 3/4 die 1" die shipped to 95624

The pro 4 looked like it was on sale last night but not any more?

The Pro4 deal is still on the store specials. You need to go to the website to get pricing.

Pulled the trigger on the pro4 deal

Robert I just wanted to give kudo's to a bad arse bender product! Here are some of the recent projects we've built with our ProBender 4LE air over hydraulic bender. With all the right bends and engineering the factory top is still usable. :grinpimp: A buggy is next after I our Moab trip and I pick up some more dies from ya. :smokin:

http://sphotos.xx.fbcdn.net/hphotos-snc7/404847_3164770767018_1497857348_33203208_148776455 8_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/418173_3528954791391_1497857348_33347814_161035557 2_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/423387_3528955311404_1497857348_33347815_67191078_ n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash4/424932_3516362836600_1497857348_33341934_407653254 _n.jpg

Is the bender that accepts jd2 model 3 dies still for sale? If so how much shipped to 95409.? Thanks.

We do but they are now special order. They are the same as the Pro4. Shippoing is around $80

Rob

Is the bender that accepts jd2 model 3 dies still for sale? If so how much shipped to 95409.? Thanks.

You do such good work I might let you build my boat tower. I would not want your talent to go to waste.. :grinpimp:

Robert I just wanted to give kudo's to a bad arse bender product! Here are some of the recent projects we've built with our ProBender 4LE air over hydraulic bender. With all the right bends and engineering the factory top is still usable. :grinpimp: A buggy is next after I our Moab trip and I pick up some more dies from ya. :smokin:

http://sphotos.xx.fbcdn.net/hphotos-snc7/404847_3164770767018_1497857348_33203208_148776455 8_n.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc7/418173_3528954791391_1497857348_33347814_161035557 2_n.jpg

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/s720x720/423387_3528955311404_1497857348_33347815_67191078_ n.jpg

http://sphotos.xx.fbcdn.net/hphotos-ash4/424932_3516362836600_1497857348_33341934_407653254 _n.jpg

You do such good work I might let you build my boat tower. I would not want your talent to go to waste.. :grinpimp:

Thanks for the compliment! As for the boat tower :lmao: MN is pretty far away from GA man! BTW I referred a friend to you and he just bought a bender. :grinpimp: Some others were asking too and I sent them ur way. :smokin:

Take care man!

ProBender-3: ready to bend some tube!

http://i150.photobucket.com/albums/s110/xcntrk75/Bronco/bender-1.jpg

is the special still goin for the pro4? just check the site but nothin comes up when i click on the specials button.

Sale ended last week..

weak! any idea when it will be onsale agian?