BALLISTIC 9 Now available!

[DrVic723]

http://www.ballisticfabrication.com/Ballistic-9-Axle-Housing_p_123-1608.html

We are now accepting orders on the Ballistic 9" housing, in steering or rear applications. The differential is available turn-key, down to a bare housing for the confident fabricator.

http://www.ballisticfabrication.com/assets/images/axle/axle1.jpg

http://www.ballisticfabrication.com/assets/images/axle/axle3.jpg

http://www.ballisticfabrication.com/assets/images/axle/axle4truss.jpg

http://www.ballisticfabrication.com/assets/images/axle/axle6truss.jpg

"The Ballistic 9" housing features a two-piece center housing, formed from .250" high grade steel using a total of 14 complex bends to provide the ultimate in strength and ground clearance. Our design uses two interlocking .250" internal gussets to add strength where is is most needed. Tubes are CNC machined for precise sealing surfaces to a mirror finish, and allow the use of double stacked seals. Add one or our truss systems to make this differential housing nearly indestructible.

The Ballistic 9 is available with an optional .375" thick mounting face plate. The plate features welded threaded bungs for extra thread engagement on the .250" thick plate, or directly drilled and tapped on a CNC mill for the .375" thick plate.


Axle tube trusses can be ordered per side on top, full top truss, full back truss or in any preferred combination. Trusses are constructed from .188" high grade steel, and are available in other thicknesses upon request.

Ships with 2.5' of tubes on either side of shell for centered, left or right hand side differential placement. For pre-cut lengths, please call. "


3.0" version is the only size available at this moment, but other sizes will be available very shortly, and can still be ordered from the website. Delivery is currently 2 weeks until production has ramped. Full double top and back trussing available.


$399.99

-Jeff

[DrVic723]

http://www.ballisticfabrication.com/assets/images/axle/housingend1.jpg

http://www.ballisticfabrication.com/assets/images/axle/housingend2.jpg

http://www.ballisticfabrication.com/assets/images/axle/housingend3.jpg

http://www.ballisticfabrication.com/assets/images/axle/housingend4.jpg

Add housing ends for the Ford 'big bearing' setup -

$99.99 / pair

[Pac8541]

Man do I need to find some money, FAST!!

Congrats on getting it out here.

[DrVic723]

These are already starting to roll out of here! Thanks everyone!

[Davids never ending]

do you offer unit bearing housing ends, to make a full floater out of it?

[DrVic723]

We will have something better. Look for release 5-6 weeks. Thanks - Jeff

[Davids never ending]

I will be waiting, hope to start my build soon. Can't wait.

[jpcrawleram]

http://i143.photobucket.com/albums/r138/jpcrawleram/sideview.jpg

http://i143.photobucket.com/albums/r138/jpcrawleram/sweet.jpg

[HammerdownJustin]

Now you just need to build your own c's and knuckles.

[DrVic723]

These are picking up speed now, we're shipping our first batch of 10 axles at the end of this week, and we have others following shortly behind. Thanks everyone, you won't be disappointed!

[Davids never ending]

Still waiting for something better for the housing ends. Can't wait till you show me.

[Arya Ebrahimi]

Any plans for a Ballistic 8"? aka a 'yota housing?

[sami-stine]

so how about a portal! portal tech has the outers for an insane amount but i bet they would sell like hot cakes!

[DrVic723]

We're working with portal-tek currently to provide some kickass product.

[DrVic723]

Any plans for a Ballistic 8"? aka a 'yota housing?

Yes, but not in the near future. We still need to release alot of product for the 9".

[DrVic723]

Still waiting for something better for the housing ends. Can't wait till you show me.

Getting closer, we're running the full float spindles at the end of this week hopefully.

[Arya Ebrahimi]

Yes, but not in the near future. We still need to release alot of product for the 9".

Damn, 'cause I kinda need one now. Mine's smiling at me right now :laughing:

Sounds like you guys are super busy which is good.

[Pac8541]

Getting closer, we're running the full float spindles at the end of this week hopefully.

Ooooo! Guess I better find some hubs and drive flanges!

[gtxracer]

For the tubes, are you guys going to offer long and short sides in the future? For instance, for a 609 build?

[samrawet]

nice image thanks for sharing :)

[Stoodty]

whats newest??

[DrVic723]

We have been selling these in the 3" flavor, front and rear application.

We'll be releasing a full float version in 2-3 weeks, and a 3.5" version in about 1.5 weeks. Thanks - Jeff

[X-Rated]

front and rear 9" housings, arb, 4.88 or 5.13 gears, 4340 shafts, disc brakes, high steer arms.

I will fab up the suspension brackets but looking for the rest of it to be turn key.

Front is a passenger side drop and rear is centered. looking for stock JK width or maybe 2" wider wms to wms...

shipped to 23321

[jeepthing77]

Getting closer, we're running the full float spindles at the end of this week hopefully.

Any updates on this?

[Ballistic Eng]

Yes we've begun production on our full float assemblies and we do have 3.5" tubed axles available as well as a prototype unit with 4 internal gussets and a slightly larger overall width for the serious desert and rock racers.

[Michaelo]

How much for a rear housing 5 on 5.5 65 WMS. full float with 40 spline shafts and disc brakes to fit 15 inch rims shipped to 66538

[Ballistic Eng]

Our 1st gen full floater kit will support 8 on 6.5" rims with a max of 35 spline for right now. Our 2nd gen. kit will support the rest, but it is only in it's prototyping stage and it will be at least a month or two before we have it available for sale.