TEN FACTORY is offering 4340 chromoly front and rear axle shafts. All axles have a 10 year warranty. Finally a chromoly shaft you can count on. All Dana 60 shafts are available Ford, and chevy stubs all innners.

we have all dana 44 and 60 applications in stock as well as blanks. no dropshipping they are here on the east coast and we will beat anybodys price.

these are high quality double heat treated induction hardened shafts and are the best shafts on the market for the money. If you want to purchase a 44 or 60 shaft no need to inquire on stock just call and order well make sure the price is inline, or you can check out online full shaft kits. mention pirate in the how did you hear about us line and we will knock $40 bucks off every shaft kit with free shipping.

to boot we warranty all our shafts in house from our stock so no game playing and waiting. we have insured many customers have made the weekend trip, or competion by getting them their shafts fast and accurately. A warranty is only as good as if you can get a new shaft in time. we insure you have them.

we may not have the largest quanitity of shafts in the country but i am fairly certain we have the largest selection. Scout, F-150, F-250, chevy, waggy early and late, early bronco, late bronco, dodge dana 60, both ford dana 60 and plenty of chevy stuff. we also stock slugs, warn hubs, spindles, highsteer studs, spindle nuts, wheel bearings seals and more.

And if you need gears well we have a pile of those and we cater to the 4.56 and up crowd.

Dana 60 Superior Chevy stubs $600 shipped

Complete Superior Kits $1165 Shipped w/ Spicer 5-806x Joints and full circle clips

Complete Superior Kits No joints $1100 Shipped


TEN FACTORY Dana 60 shafts 35/35 Ford Full kits are ready to ship, Dodge, All Shafts are in stock- $750 Kit comes with Forged cross spicer joints upgrades available

http://eastcoastgearsupply.com/i-151991-10-factory-chromoly-upgrade-full-kit-dana-60.html

Do they come with u-joints?

Bump for a great vendor and a great product.

do they offer the dana 44 shafts for the f-250's

ford f250 these will not be available immediatly but may be in the near future.

As for Ujoints Spicers joints will be included for an extra $45 for the 60 shafts

for the 44's and 30's alloy x joints will be included as supplies last for an additional $45 and ctms or super joints can be purchased.

If you get CTM's or Yukon super joints they will be discounted $30 dollars w/ shaft purchase

here is a link to our site to give you idea of pricing http://eastcoastgearsupply.com/i-151991-10-factory-chromoly-upgrade-full-kit-dana-60.html and the discount associated
w/ getting joints for them.

These ship free

Got the 60 shafts up on our site to order online, don't forget pirate 10% discount promotion code PBB. For those that ordered today I included your dicount with the order, these will ship ASAP.
Heres the 60 page
http://eastcoastgearsupply.com/c-61639-dana-60.html

how about a custom rear 4340, FF shaft for a toyota rear end, with an elocker? or 300m shafts?

do you have an elocker axle from a tacoma or did you modify a IFS/or SA housing. Or do you have a full floater housing that was modified for e-locker

do you have an elocker axle from a tacoma or did you modify a IFS/or SA housing. Or do you have a full floater housing that was modified for e-locker

2003 taco rear e-locker, diamond or trail-gear rear end (IFS width), frontrange offroad FF kit.

shipped ?

yes shipped

complete axle with joints
d44 front for a 76' f-150?

pm me

May be a dumb questions, but who is 10 Factory. I have never heard of them. I see on the site the D60 shafts are still listed as Alloy USA, did they take over Alloy USA. Very interested but would like some info too

Is the site accurate, just double checking price dodge dana 60 with spicer joints. thanks

It is kinda of confusing, Motive gear bought Alloy Usa's stock and Ron Stobaugh part owner of alloy has moved to motive. Omix bought alloy/precision gear so the alloy name is dead. the Ten factory name is the new name in quality axle shafts w/ a ten year warranty. Same quality specs that alloy had now with a great big company to support it.

Price on full dana 60 kit with spicer forged cross U-joints are $799

complete axle with joints
d44 front for a 76' f-150?

pm me
x2
+ same truck, 9" rear

Glad to hear they got stuff up and running. :smokin:

PM's sent

So 799 will get both innners and both outters and 2 u joints for a ford low pinion 60 77 model how does the warrany work if it breaks? Thats wat i am curious about

Its a ten year manufacturers warranty if it breaks you send it back and they send you a new one. We are trying to stay fully stocked on these in precuts, so if you break one we ship you one immediatly and well take care of the warranty for you. If you do have a problem with a product we sell, we will warranty it or help you warranty it, not push you off to the manufacturer. For example we have warrantied some precision gears for customers lately and we have just footed the bill. I believe this will come back in customer loyalty.

60 shafts are fully stocked, dodge, chevy, Ford

Ready to ship

How about dana 44 driver drop jeep wagoneer front axles? Shipped to 92065

PM sent

Winter biulds are in full swing get some shafts for the spring

Christmas special $35 dollars off a full kit, in stock ready to ship must be ordered before 31st.

Dana 30 TJ shafts shipped to 77429.

Full 60 kits ready to ship- discounted until the 31st- $764- free shipping

get your shafts full kits available.

Nice looken axles mister.:smokin:

Custom lengths?

yes custom lengths are available. thanks

Please quote on 4 (2 sets) 4340 rear axle shafts for a '75 International Scout Dana 44 axle lenght 28.25", shipped to Miami FL 33172 business.

they would have to be 1541H there are no cromoly rear 44 shafts available. price PM'd

pm sent

So are Alloy USA shafts warranteed by 10 factory or will they get bought out after two years and a 10 yr warrantee is useless????

Im confused by the question, who is getting bought out alloy or ten factory. Ten factory is owned by mid west truck which owns motive they are huge and very repsectable. Alloy is now owned by Omix they are also huge and despite their other product lines which is alot of bolt on jeep stuff have an awesome distribution system. They have alloys stock and are continuing to produce the shafts the same way alloy did. Both companies have a 10 year warranty. Both companies are honoring warranties on alloy shafts, Omix/alloy are only doing it on a ratio basis per vendor, ie if x vendor bought and sold one set of shafts and is trying to warranty 20 sets they are not going to warranty all of them. 10 factory says and is warranting any broken Alloy shafts. I just warrantied a stub shaft for a customer that did not purchase from me and niether manufacturer had the shaft, so what vendor you purchase form plays a roll as well. As long as there is a supply of alloy or 10 factory shafts we will be personally warranting these shafts. No matter who owns the name or the manufacturing process. Were selling ten factories predominatly b/c they are the same quality as the alloys but much less money the new alloy for this same set of shafts is going to retail in the $900 range w/ no joints. Once the old alloy stuff sells of which is going cheap right now the new pricing threw omix/alloy is high. So theres the scoop........

Chevy d60 inners outers spicers shipped 80501

Thanks

Will the warranty process be as kickass as the old Alloy USA process? I've heard stories of Ron overnighting replacement shafts to guys at Crawford's Campground at Tellico, so they could wheel the rest of their trip.

Have chevy inners but no Chevy stub shafts, out until febuary. I have one warranty shafts left and i am going to hold it. Yes warranty program will still be great.

Price on a 79 Bronco D44 4340 stub shipped to 37620.

Thanks,
Sean

So what kind of smokin deal can you give me on....

The D60 Axle and u-joint combo and an OX with shifter (4.56s)
shipped to NJ 08619?

Im looking for a pair of 94-01 style dodge ram 1500 stub shafts. Its a dana 44 33 spline unit bearing stub shaft. I'm guessing u dont have these. Nobody seems to make them. But with a alittle modifaction u can run them in a dana 30/ rubicon dana 44. Huge upgrade!

So your out of stubs. I feel shafted. :D

yes Chevy 60 stubs are out until mid to late febuary.

dana 44 Ten factory shafts are not yet available, and the other supply chains seem to be pretty scarce on the 44 stuff as well.
ill see if i can hunt you down a stub.

And a Pm is on the way for the ox locker

How about rear ff 35 spline 60 shafts?

Front d44 f250 1978 chromos shipped to 76201 commercial

Man it seems like nobody can keep chevy dana 60 stub shafts on the shelf. Ive been waiting close to 8 months for mine

shafts and joints for dana 60 ford 88 35 spline
long side shorten 5"

Any idea when Dana 44 shafts will be available? I have a 77 waggy front in my CJ5 that is in need of some new shafts. The Yukon reviews here on the PBB aren't very favorable.

Thanks,

Jon Martin

10 factory shafts i have no ETA on, Alloy shafts shoul be soon 30-60 days but the price is high w/ th enew alloy.

Yuko bought warns axle division and are releasing a new line of american made shafts, these prices will also be higher but of much better quality.

D44 quality shafts should be available from someone in the next 30-60 days

What if the u-joint breaks and takes out the inner and outer ears on the shafts. Is that covered under the warranty.

could I get a quote on a pair of alloy Ford D 60 stubs 35 spline shipped to 95762? Thanks

Are they neck down shafts?

What if the u-joint breaks and takes out the inner and outer ears on the shafts. Is that covered under the warranty.


Shafts are still warrantied as long as you use a spicer forged joint or better, just don't run a brute force joint in it. But basically there would be no way to tell what joint you ran and warranty is still good.

To reiterate we are fully stocking these shafts and warrantying them which means fast ship times. we are fully stocked on all dana 60 shafts excpet the gm/dodge outers these will be here soon.

Price for a pair of 35 spline Ford unit bearing stubs shipped to 92173, thanks

Ford 60 shafts ready to go chevy stubs should be here in a week or so

So what about this:

Price for a pair of 35 spline Ford unit bearing stubs shipped to 92173, thanks

I'm ready to order, let me know.

PM sent

Chevy 60 stubs and inners............price separated for both if possible to 78539

chevy stubs are said to be in by the end of the month ill send you a pm on the inners which are in stock along with all ford Shafts

$799 complete 10 year warranty kits

Everything In stock but chevy stubs

Quality shafts at an affordable price

Can I get a price on a set of 35 spline Ford outers shipped to 37620. The axle is a BJ 60 from a 94 model truck if it matters. Thanks.

Sean

so do yall not have 35spline outer shafts for ford D60 NON unit bearing style? both of the products here: http://eastcoastgearsupply.com/c-61639-dana-60.html say they are for unit bearing style only...

Do you have the chevy stubs in yet??

35 spline chevy stubs shipped, thanks

site is fixed that was a type-o,

Frod stubs are in stock, chevy's are still not here hopefully a week or so.

cost on 76 waggy d44 short side with stub and joint! stock stuff not cro mo!
shipped 84770

Anything on dana30 shafts yet? Or are you still just shipping the old stock Alloy USA stuff?

PM with with price on hp d30 shafts w/ joints shipped to 26041 zip code.

we have 30 stuff also

D60 rear 35 spl. chromo shafts, do you have 'em?

Any news on the Dana 44 stuff yet?
I could use a set for a '76 Ford F-150

Any idea when the 35 spline ford unit bearing stubs will be avalible?

My 10 factory 60 shafts look great, and thanks for the quick handling on my "bling-bling" u-joints... :smokin:

Bump for a great vendor

looking for Rear D60FF 30 spline chromos......how much?

thanks
Jeff

I ordered my 35 spline outers on Monday and had them sitting at my doorstep on Tueday.:smokin: Thanks Chase!:beer:

Sean

How much for Ford 35 spline outers shipped to 72956?

Price on 79 waggy d44 inners (long side needs 4" taken off) to 16222.

I'm waiting on another set of yukons to give up the ghost.

PM's sent

NO chevy stubs except stock ones. But all other shafts in stock ready to ship

2004 Rubicon front set shipped to 41017.

88 Ford outers shipped to 28216??

Shoot me a PM once you get Chevy 60 35 splines back in stock.

77 F-150 HP D44 with super joints shipped to 94550.

PLenty of ford stubs and all inners in stock...............Still awaiting chevy stubs

can i get a price on front ford d44 shafts, full width - no custom lengths. and joints, no stock joints, ctms hopefully if you got em. let me know a couple options on good joints if you can.
shipped to 45230 business.

thanks

looking to order in the next month

We will have Superior Chevy 60 Stubs in about a week they are on the way. So for the CA guys I can drop ship them for you immediatly. East Coast guys wait a week and ill get you some shafts w/ minimal shipping costs.

Full kits availble as well.

Dana 60 Superior Chevy stubs $600 shipped

Complete Superior Kits $1150 Shipped w/ Spicer 508x Joints and full circle clips

Complete Superior Kits No joints $1070 Shipped

Can I get a price on a full set (both inners/outers) for an early bronco D44, as compared to the Nitro axles? In the PM can you also explain the differences between the two, and most importantly how each company's warranty works. if I could get seperate quotes with both super joints and alloy X's that would be great

So, quotes for these setups, and a description of warranty processes would all be much appreciated!!

10 factory inners/outers with super joints
10 factory inners/outers with Alloy X's
Nitro inners/outers with super joints
Nitro inners/outers with Alloy X's

Ten factory does not have any 44 shafts available, ten factory also does not sell th ealloy x-joints.

so Nitros or superiors would be your only choices

Nitro's w/ alloy x-joints- $580 shipped
Nitros w/ super joints $900 shipped

As far as i know everyone is out of 44 shafts and super joints we have both available.

pm a quote for a ford bjd60 27.5 and 27.25 inners w/outers and joints to 95824
thanx

Chromoly shafts nearly every application ready to ship

Hey man got my Ten Factory 35 spline outers and they look great. I got a little problem my Rockcrusher drive flange slug doesn't seem to want to slide in. Was just wondering if you knew of any issues with these and drive slugs.

Rear D60 FF from a 79 ford 30 spline/ also for the front Ford 60 with 35 spline inners and outers
shipped to 11729

The slugs will need to be tapped on to the shaft, rolled splines are a very tight fit new, once you run the shafts they will loosen up. Make sure the spline are lined up and knock them in. Thanks, Chase

72-75 cj5 rear dana 44 30 spline shipped to 90623

Superior Unit Bearing Stubs also available

Superior- Dana 60 Chevy stubs, Unit bearing stubs, all inners

10 Factory- all shafts in stock except Chevy stubs, and unit bearing stubs

Spicer 60 Stubs

Nearly every 44 shafts

You need chevy stubs we have them........... full superior kits available

Full stock on ten factory except chevy stubs.

Chevy spicer stubs in stock.

Superior Unit bearing stubs in stock.

Chevy spicer stubs in stock. are these 35 spline and price on a set

Sent you a quote, we have every dana 60 shaft available right now. Stock spicers, Superior chevy outers, 10 factory ford outers, all inners in ten factory and superior. Superior unti bearing stubs.

superior 15.98's are out common to the dodge, 80's ford but do have the ten factory 15.98's available.

So if you need chromoly 60 shafts we have you covered all are excellent products.

60,44,30 shafts in stock ready to ship

can I get a price on chromo shafts w/ spicer u-joints for a front GM 10 bolt shipped to 91343?

75' waggy 44 fronts inners and outers with CTMs to 48430

Sent both of you a PM both sets are in stock

Need a full set of 4340 chromoly 27 spline shafts complete with alloy x-joints,(or better), with full circle clips, for a 95 XJ,,,,,,,, and a set of 1541 dutchman shafts,(or better), for a ford 8.8 with 31 spline,,, all shipped to 12303.

I also need a master install kit if you sell them.

Thank You!!!!!!!!!!!!

bttt

We still have all the 60 shafts, ten factory ford stubs, superior chevy stubs, both stlyle inners

full line of 44 shafts

full line of 30 shafts

dana 44 TJ, rubicon rear shafts

As a note if you order on the site the pirate discount code will not be honored for shafts, on the dana 44, dana 30 stuff i will work with you. but all kits are already recieving free shipping.

Can I get a price on rear D44 shafts for a TJ? 30 spline with wheel studs and bearings/seals. Thanks!

Rear 44 shafts are $340 complete kits, shaft, bearings, studs. Plus shipping and we are very fair on shipping.

Can i please get a price on a pair of Ford 35 spl stubs shipped to 53188. Need to order on Monday Thanks

looking for a price on rear chromoly shafts for a tj rubicon(30 spline) shipped to 17402.

Do you do custom length 60 inner shafts? I need one (either Yukon, 10 Factory, or Superior) 32.07" and a factory 89-97' Ford short side inner (16.17"). If you do custom lengths, what is the price and lead time? Thanks, Josh

Yes but we do not have any blanks available as does anyone i don't think, we could get you rolling mid may.

I still have 12 ford stubs left and inners for full kits

two of the best!!!! chevy chromo dana 60 35 spline stubs to 95945, thanks

How about just driver side outer, joint, and inner Ford 35 spline. to 80005 Is the warrarnty just for the shafts or joint too?

do you still have chevy 60 35 spline inners and stubs in stock??
how much shipped to 95963, include joints, spicer and ctm please

Thanks,

I have one full chevy superior set someone better snatch it up before they are gone.

Price on 76-79 wagoneer D44 inners, outers and joints.

Quote on a full set of 79 Ford, inner/outer with Spicer 5-806x ujoints to 62035.

thanks

Superior Unit Bearing Stubs also available

35 spline?
if so, price shipped to 82801

Thanks in advance
Mark

pmed you

Heard anything about when chevy 35 spline stubs will come back into stock???

I Have a full set of superior- Chevy inners and outers. Import chevy stubs I should have a few by monday. Large shipment sometime in june

Lots of 44 and 60 shafts in stock

Every shaft available dana 44 and dana 60. In stock Ready to Ship

lots of 44 shafts blanks available for custom length apps

In stock fresh inventory to arrive tommorrow

do you have the rubicon d44 front?

yes in stock

Looking for a complete set of shafts for a HP d44 front 30spine out of a 78? F-250. shipped to 22309 both sides inner and outer with joints. Thanks

have those in stock ready to ship sent you a PM.

Looking for Chevy 44 outers shipped to 55301

Lots of shafts ready to ship custom available

You gave me a quote a while back, I said I wanted 'em and you sent me an invoice at a higher price. I sent an email questioning it and never heard back from you. I do still need 78/79 Ford D60 inners and outers (35 spline both). Could you look into this?

Just call me with Quote price and ask for Chase, could have been someone else that sent the invoice

Just call me with Quote price and ask for Chase, could have been someone else that sent the invoice

Im on the phone with yall now and they have never heard of you :flipoff2:

looking for Front Axle kit #MG22171 for 74-79 Wagoneer Dana 44 shipped to Miami FL 33166 business address.

looking for front axle kit #mg22171 for 74-79 wagoneer dana 44 shipped to miami fl 33166 business address.

in stock

How about dana 44 driver drop jeep wagoneer front axles? Shipped to 92065

quote for this aswell to 29630

PM sent these shafts are in stock on the East Coast for fast ship times.

Dana 60 Superior and ten factory shafts.
Dana 44 Superior and Nitro Shafts

2 dana 44 GM outers shipped to 95403

60's and 44's in stock ready to ship

Driver's drop Waggy to 30041? thanks

inner Chevy D60 long and short side shipped to 80239, (79 chevy 1 ton axle)
thx

inner chevy longside. to 37013

78/79 ford bronco D44 axle complete set shipped to 37771

all shafts ready to ship

we have all dana 44 and 60 applications in stock as well as blanks. no dropshipping they are here on the east coast and we will beat anybodys price.

these are high quality double heat treated induction hardened shafts and are the best shafts on the market for the money. If you want to purchase a 44 or 60 shaft no need to inquire on stock just call and order well make sure the price is inline, or you can check out online full shaft kits. mention pirate in the how did you hear about us line and we will knock $40 bucks off every shaft kit with free shipping.

to boot we warranty all our shafts in house from our stock so no game playing and waiting. we have insured many customers have made the weekend trip, or competion by getting them their shafts fast and accurately. A warranty is only as good as if you can get a new shaft in time. we insure you have them.

we may not have the largest quanitity of shafts in the country but i am fairly certain we have the largest selection. Scout, F-150, F-250, chevy, waggy early and late, early bronco, late bronco, dodge dana 60, both ford dana 60 and plenty of chevy stuff. we also stock slugs, warn hubs, spindles, highsteer studs, spindle nuts, wheel bearings seals and more.

And if you need gears well we have a pile of those and we cater to the 4.56 and up crowd.

shafts , shaft and more shafts ready to ship

Just got more f-150 shafts in and waggy's

I just ordered and received a Detroit and a set of shafts from Chase last week. They had the lowest price I could find on the Detroit, and Free Shipping on top of it!

There was a mix up on my custom shafts, but Chase got me a new one out the next day so I could still make my weekend trip to the Hammers.

I flogged the shafts all weekend with no issues. Great product, and great customer service. Thanks ECGS

Lots of shafts in stock 44, 60, and blanks for both.

In stock and ready to ship, blanks available for custom shafts, all models are available.

Lots of shafts ready to ship

you guys have dana 60 rear shafts? 30 spline full float 34.5" in length IIRC (from a 78 f250 truck)

yes sending you a pm

Quote on 77 F-150 D44 shafts inners and outers to 78729. Quote with and without CTM's if you can please.

Thanks,
Jon

Lots of shafts in stock and ready to ship, also have something special coming in tommorrow that will go nice with some D60 shafts

price on 2) alloy D60 joints (CTM, Longfield, Yukon super joints, etc...)

Lots of shafts in stock and 300M Joints to go with them
http://eastcoastgearsupply.com/i-1566318-the-excalibur-300m-dana-60-u-joint.html

http://eastcoastgearsupply.com/i-1716993-the-excalibur-300m-dana-44-u-joint.html

Just wanna bump this up a bit. Chase and ECGS are amazing. I had a question about my order and called at 10:30 last night and Chase was still there to help me with the order.

Best pricing, fastest shipping, quality service.

Lockers, Shafts, U Joints, Gears...call ECGS. :smokin::smokin:

every shaft application in stock an blanks available, 300m ujoints to accompany them. we also have excellent prices if you find it lower with the same quality we will match it and we stock it, we warranty all the shafts we sell from our stock so warranties happen fast.

Hello, Could I get a quote on 75 Scout II D44 Rear Shafts shipped to 80918. Thanks!

how about custom lengths before koh 32" and 20.5" 35 spline 60s

Is this thread still active? I have been searching for axles over the last month and a half with NO LUCK. My search has lead me HERE. I'm in Apex, about 10 mi. from the location of the OP. I'd like to check pricing and availability for a less than popular application, and am ready to order or pick-up ASAP.

Thanks, -Greg

should have them in stock unless they are super rare, give us a call

Nearly every application in stock and ready to ship w/ 300m joints

Can you get replacement caps for the joints?

yes how many do you need, you call to order. 919-672-2705

Front Gm D44 (1972 open knuckle) shafts w/ 760X ujoints shipped to 79118?
Are these Alloy USA shafts?

Ford F250 Dana 44 inners and outers. Could you quote with 300M joints and with out.

Thanks

In stock ready to ship

Please quote me a set of front and rear 10 Motive Axles for my 98 XJ. D30 front and C8.25 29 spline rear shipped to 38028.

A price for both sets at once and seperatly would be appreciated.

price on Dana 44 Chevy outers only, and 300M joints.

Thanks

I have Rear D44 out of a 97 TJ
Looking for price quote for the following....
35 spline spool if anyone makes it or 30 spline
4.88 R/P
Chromo shafts
Master Install Kit with bearings
shipped to 92065
or just the shafts
Thanks

Price for 2 of part#MG20650B Dana 60 front outer axle GM 35 spline shipped to Miami fl 33172 business address

Inner an outters for a GM D44 with Ujoints. shipped 97405

Wondering if you guys make custom length inners for a dana 44 and if so could i get a quote?Thanks.

yes in stock ready to be cut

If you have them...can I get a price on rear chromoly shafts for a '95-up Ford Explorer 8.8 shipped to 76309?

Thanks

just wondering if these prices are still current on the first page?

How about a set of 35 spline Ten Factory shafts for a rear Dana 44 for a 2005 Jeep TJ shipped to zip code 44035. Thanks

pricing and availabilty still good sent out PM's

I have a 77'-79' F-250 front HP Dana 44 and i am looking for some shafts for this, and price on splicers ctm or yukon. 30 spline shipped to 93711

Lookin for a price on shafts for a 77 EB D44, and for a 95+ expo 8.8 as well if available. T4P-1B1, Red Deer AB

Great Customer Sevice....Just ordered outer stubs and joints. Thanks Johnie:smokin:

were having a hard time covering threads so if you need to order or need a quote best o pm us or call.

Our avaliabilty on shafts is pretty strong most every application is in stock. so if you need something give a call we will make it happen.

Super Fast Ship...Thanks Johnie:smokin:

the Ten factory name is the new name in quality axle shafts w/ a ten year warranty. Same quality specs that alloy had now with a great big company to support it.


So the Ten Factory stuff and the Alloy stuff all come from the same plant???

They are the same thing...made in the USA????

Can I get a quote for a (1) Ten Factory 27 spline stub shaft for a 2003 TJ Rubicon front axle shipped to 77845?

Thanks,
Daniel

Got my new axles in and they are awesome. Great work guys. Awesome deal.. thanks

Can I get a price quote for a 2"x8" hydro assist kit shipped to 39047?

Thanks!

-Lee

PM'ed you for a quote.

can I get a quote for a complete set of axle shafts for my 88 Ford Dana 60 front complete with CTM joints? shipped to 65802. need them by this coming weekend if possible. thanks!

HP d30 27 spline chromoly shaft kit, master instal kit, & outter seals shipped to 12303?? Also a HP d30 truss, skids & gussets if you make them!!
Thank You!!

TJ Dana 44 Rear

Ten 4340 shafts 30 spline and if they make 33 spline

Detroit 30 spline and 33 spline 3.92 and up

Shipping to 75034

Alloy axle shafts for a 1976 Chevy front D44. Inners and outers, no u-joints. Shipped to 82716

price on:
TJ D44 4.88s Yukon gears
XJ HP D30 4.88s Yukon gears
Yukon master install kits for TJ D44 and XJ HP D30

Shipped to 80014.

Thanks

price for Dana 44 front 79 ford F350 High pinion, shipped to 93711:D

great looking deals. could i get a price for all shafts for a 79 waggy d44 front, and just the short side inner?

thanks in advance

price on:
TJ D44 4.88s Yukon gears
XJ HP D30 4.88s Yukon gears
Yukon master install kits for TJ D44 and XJ HP D30

Shipped to 80014.

Thanks

no reply...anybody home? :mad3:

03 Rubicon D44 : quote for rear shafts (stock spline count) shipped to 42303.

Thanks, KG

Lots of shafts in stock and ready to ship

how much for 1 - Scout D44 short inner to Miami FL 33166 business address?

How much for (1) 35 spline 4340 or 1541H Chevy D60 outer? Shipping to 71913. Thanks!

lots of shafts ready to ship

Price on a set of XJ rear D44 shafts, 30 spline.

98607

Thanks

Dana 44 outer stub shaft chromoly 9.94" gm. Need 2 shipped to 39047.

ten factory part numbers
MG20600 (blank- cut to fit????)
MG20601
MG20651 x2


to 12065

thanks

looking for a set of frt. d44 shafts for a 83 dodge ramcharger i do not need u-joints just the shafts

shipped to business 80002

thanks!

Tons of shaft in stock and ready to ship

Price on both inners and spicer joints for Chevy 60 shipped to 18073.

Thanks
Scott

Any deals on Dana 44 Detroit Locker and 33 spline shafts for a TJ?

Price on :smokin:shafts, Dana 44 rear tj with drum brakes, 30 spine

Tons of 60 and 44 and 30 shafts, 300m joints all in stock ready to move a couple. best price gauranteed

Price on (2) ford dana 60 35 spline stub shafts zip 47172

Thanks

Can I get a price on a set of shafts and 300m joints for a tj, and if you have it, the seal needed to install them in a yj d30? No shipping, I'll pick them up.
-Rich

Pm's s sent come by anytime they are in stock.

D60 inners and outers (no joints)
shippesd to South Africa?

price on 35 spline detriot for a tera crd 60, 456 gears, complete bearing, seal, and install kit , plus a complete bearing and install kit for a 14 bolt thanks

PM sent lots of shaft in stock

Tons of shafts in stock and ready to ship.

D60 and d44 all makes and models, Custom shafts no problem blanks in stock.

It is very difficult for us to check individual threads on the boards but we always answer the phone 919-672-2705, and return emails with estimates chase@eastcoastgearsupply.com

Ten Factory Dana 30 4340 chromoly 27 spline shafts + super-joints shipped to 77378

Quote for both inners for 02' BJ 60 shipped to 80537

Hey.

Need a set (pair) of IH scout D44 rears sent to the west coast... 98239


PS. Whould you press the bearings on?

Tons of shafts in stock and ready to ship.

D60 and d44 all makes and models, Custom shafts no problem blanks in stock.

It is very difficult for us to check individual threads on the boards but we always answer the phone 919-672-2705, and return emails with estimates chase@eastcoastgearsupply.com
__________________

Price on a set of axles for a 79 bronco dana 44.

nearly all applications of shafts in stock and ready to ship

Just made my order for chromoly inners.

Can I ge a price for a 10fatcory gm Dana 60 long side inner and 300m joint shipped to 84119?

Thanks,
Calvin

Tons of shafts in stock and ready to ship.

D60 and d44 all makes and models, Custom shafts no problem blanks in stock.

It is very difficult for us to check individual threads on the boards but we always answer the phone 919-672-2705, and return emails with estimates chase@eastcoastgearsupply.com

Dana 30 shafts shipped to 38119?

tons of shafts ready to ship all in stock on the east coast.

D30, d44, D60, even 10 bolt 28 and 30 spline

If you have an oddball axle we can make custom shafts and have different length premade rolled spline shafts others dont have, Including F250 10.66 stubs, F250 inners, and wide track applications and dodge 44 applications.

If its a chromoly front shaft chances are we have it.

e-mail sent for quote request

Thanks, David

Tons of shafts available and ready to ship for all models, custome ones and odd premade lengths others do not carry.

Best way to get us is by phone or you can email me chase@eastcoastgearsupply.com

Price for a complete set of Chromolys for 2008 JK. 94550

PM Sent

Tons of shafts in stock and ready to ship, drive flanges for dana 60 external and internal. D44 drive flanges 19 spline. Spicer ujoints or Chromoly. We have nearly every shaft application in stock and ready to ship. Custom application expect 1 week lead time.