|
IndyCJ 08-13-2002, 05:46 AM I bought a CJ6 frame this week, and am interested in putting a bobbed CJ8 body on it. Anybody done it? Is it even possible? Looking at the frame, it would appear that there would just be body mount 'issues' towards the rear since the frame stays at the 27.5" wide mark. TIA Out emsoffroad 08-13-2002, 07:54 AM I've done an older body, onto a newer frame. Put a 73 cj-5 tub on a 80 cj-5 frame. Had to make a bunch of body mounts on the tub. All in all it wasn't to bad. Now using a cj-6 and cj-8. I would guess that you are going to have to make a lot of new mounts. syko 08-13-2002, 10:54 AM I thought this was hush hush??????? Just couldn't wait could ya:flipoff2: :D IndyCJ 08-13-2002, 11:33 AM Originally posted by syko I thought this was hush hush??????? Just couldn't wait could ya:flipoff2: :D Busted :flipoff2: Yea, I might be having a change of plans anyway, I'll explain sometime. :D Got a Scrambler tub laying around anywhere? syko 08-13-2002, 11:51 AM Originally posted by IndyCJ Got a Scrambler tub laying around anywhere? Actually funny you should ask, I know were one is sitting a guy might buy cheap(I think) I'll check to see if it's still there and what kind of shape the body is in. If you want IndyCJ 08-13-2002, 01:53 PM Originally posted by syko Actually funny you should ask, I know were one is sitting a guy might buy cheap(I think) I'll check to see if it's still there and what kind of shape the body is in. If you want Yea, find out and let me know. I'm not afraid of body work either. :D Cheepin 08-13-2002, 05:41 PM My CJ-5 I am building has a 75 tub I put on a 79 frame.I used 2x3 tubing and spanned across the body mounts on the frame and bolted through everything.It seems to be working.Not finished so don't know if it will hold up.May end up moving body mounts not sure yet. ItsaCJ6 08-13-2002, 07:40 PM The 8 tub should work great... since the rear section of the frame on the 6 is narrower than the 8 frame. It will require the relocation of body mounts but they should be in easy locations. You didnt say what year 6 frame. If its 72 up you will have no problem with the front end. If its older, you have to remember they use shorter fenders. So the you might have to mount the tub back a bit. IndyCJ 08-14-2002, 05:51 AM Originally posted by ItsaCJ6 The 8 tub should work great... since the rear section of the frame on the 6 is narrower than the 8 frame. It will require the relocation of body mounts but they should be in easy locations. You didnt say what year 6 frame. If its 72 up you will have no problem with the front end. If its older, you have to remember they use shorter fenders. So the you might have to mount the tub back a bit. Its a 75 frame which is 'fortunate'. I'm hoping that Syko can find me a tub. :D syko 08-14-2002, 07:01 AM I'll call to see if it's still there. popeye44 08-14-2002, 09:21 PM I was thinkin about an 8 frame under my 6.. haven't even checked if it's possible but i'm guessing with enough steel and a large metal brake It should be possible :D Gotta get drivetrain somewhat dialed in.. then I'll worry about frames hehe. good luck. sounds like a fun project. syko 08-19-2002, 12:05 PM Pics of the aforementioned Scrambler I have more when you get back. :D syko 08-19-2002, 12:06 PM #2 syko 08-19-2002, 12:07 PM From under the bed IndyCJ 08-23-2002, 07:36 AM Syko, your PM box is full. :flipoff2: syko 08-23-2002, 07:49 AM Originally posted by IndyCJ Syko, your PM box is full. :flipoff2: It's clean now Grandpa Jeep 08-23-2002, 09:51 AM Is the wheel base the same between a 6 and an 8? I thought the 8 was longer. Why not use the frame for a CJ-8? It sounds liek you're going to bob the back anyway, why not bob the frame too. Isn't the CJ-8 frame boxed too? jeepnmatt 08-23-2002, 11:56 AM i have a scrambler tub in INDY that i want to sell... i'm losing my storage space, so i'm motivated! it needs some work, but it sounds like your building something custom anyway. i even deliver! shoot me an email if you are interested or call tonight (509-3467) mat@natare.com matt also, i know where a complete, non running, needs body work (NO RUST, just dents), 4cyl, 1981 scrambler is for sale ($2700 firm) and where a rusted out POS with a good frame scrambler is (ask Meyer). IndyCJ 08-23-2002, 12:02 PM Originally posted by Grandpa Jeep Is the wheel base the same between a 6 and an 8? I thought the 8 was longer. Why not use the frame for a CJ-8? It sounds liek you're going to bob the back anyway, why not bob the frame too. Isn't the CJ-8 frame boxed too? Yea, the wheelbase is the same, I think you might be thinking that it's longer because of the overhang. I thought about finding an 8 frame, but the 6 frame kind of fell into my lap. For $100 bucks, I got the frame, the original VIN plate, and the title. So, it's all good. CSP 08-23-2002, 01:33 PM Originally posted by Grandpa Jeep Is the wheel base the same between a 6 and an 8? I thought the 8 was longer. If it's a '72-75 CJ6 they are the same wheelbase. Prior to '72 they are like CJ5's with the 3" shorter front clip. My CJ6 has a Commando frame under it which is also the same wheelbase, but boxed except for the last three feet or so. Mine has been completely boxed. | |