The heads have the following parts installed:
Manley Stainless Steel Valves-
2.050 int.
1.600 ex.
Manley Valve Springs- 1.550
Manley Retainers 1,500 and 10 degree Locks
Lunati Guide plates for 3/8 pushrods
Lunati Rocker Studsfor 7/16 rockers
PSI Seals-11/32
Solid Bronze Guides- 11/32

Specs:
200cc intake ports
Intake Ports -Ported to Fel-Pro #1206 Gasket
Straight spark plug location
Chambers-64cc
Heads have been -Presure checked-Thermo Cleaned-Milled- have a Competition valve job.

Spring Pressures-
Installed height-1.900@135 lbs.
Open height@-1.300(.600 lift)-400 lbs
Coil Bind height- 1.100.

Heads are set up for flat tappet or hydraulic roller cam. will also include a set of lunati .680 lift springs.

$850 shipped anywhere in the lower 48. im located at waseca, mn only selling cause im going big block. heads are fresh from the machine shop 2 weeks ago never bolted on a motor since rebuild.