I need some info,
I am going to install a 88-91 kingpin 60 in my TTB front end. I need pics and info on radius arms or leaf springs, those are my 2 options, I dont want to lift really high 3-5 inchs max, but with the width of the spring perch mount it seems like the rad arm will be best ????
any help with this would be great pics are better....
I did searchs on this and found these would be best for me and MY wallet. That is why I am asking yall for what u did...
thanx again

im about finished putting an 88 D60 in my 95 bronco. went with homemade tubular RA. with ballistic's brackets. if you want it that low you have to make anew engine crossmember. but put a real front bumper or front crossmember in before you cut the engine one out to hold the frame. my buildup is <http://fullsizebronco.com/forum/showthread.php?t=118637> i hear from a guy with leaves and a 4-5 inch lift that he hates it cause the axle is always clanking into things(frame). any questions ask away.