I have the 3" all pro buggy springs on my car.
The right front has flattened out real bad. (not the fault of the spring / I have pics of two right front drop in landings that caused it) Almost zero arch. I have emailed all pro and they have discontinued the springs and cant point me in the right direction for replacements.

Any suggestions?
These springs worked great and I dont want the car any taller.

I had the same springs on my rig.... No good for the hammers or anywhere you want speed.:shaking:
I ended up building a hybrid pack out of stock rears, keeping the main leaf from the buggy spring.. Still keeps a pretty low cog. I am running 3" springs in the rear. I am prolly going to step up to some Marlin 4" springs this winter FWIW, I didn't care for the Buggy springs at all..

I have a set of these in good shape. I'll shoot you a pm.

Maybe I need to consider another spring. I only ran one fast event and the car did not handle well.
I think the car is primarily a crawler and the AP buggies did that very well.

any other input out there?

I was running a hybrid wrangler pack on mine. 15 min at Area BFE in Moab and they were toast. I just ordered the AP 4" for the rear of mine.

John, I may be interested in the 3" set you have. Depends how the buggy sits with the new springs in the rear. Are they a front set?

I have front and rear but Wes has offered to purchase them. If he changes his mind before I get them removed from the vehicle they are on i'll let you know.

i got a front set with shackels, trying to sell (3in allpro fronts)

i got a front set with shackels, trying to sell (3in allpro fronts)

Pm'd you