|
Cheepin 09-06-2001, 08:45 PM I have a 205 T-case behind a SM465 and would like to rotate it for more clearance.I remember there was some talk of this on here a while back.Anyone done this or does anyone sell these adapters?I have an idea of how I would do this but my welding skill need help!Thanks Blazin <IMG SRC="smilies/biggrin.gif" border="0"> ranger 09-06-2001, 09:11 PM If I'm not mistaken RCKCRUZER made these and was selling them. He is normally on the Cruzah forum. <IMG SRC="smilies/skull.gif" border="0"> scoobydann 09-06-2001, 09:15 PM The only thing I've heard about clocking a 205 is w/ the ORD Doubler skinny 09-07-2001, 08:02 AM ya get a doubler ryeguy 09-07-2001, 08:49 AM OTTEngineering clocked my NP205 to exactly what I wanted for my 203/205 doubler... --Rob RHINO 09-07-2001, 03:24 PM just drill and tap new holes in the 205 case itself, plenty strong for more holes. i plan on doing this. Cheepin 09-07-2001, 08:17 PM Not enough room for a doubler!This set up is for the CJ5.I just want to do this temporary will probally be going to a T-case I can do a 4to1 kit in when money allows.I will check out the cruiser forum.Thanks Blazin <IMG SRC="smilies/biggrin.gif" border="0"> fc187 09-09-2001, 12:29 AM Originally posted by RHINO: <STRONG>just drill and tap new holes in the 205 case itself, plenty strong for more holes. i plan on doing this.</STRONG> hmmm <IMG SRC="smilies/idea.gif" border="0"> that sound good! I may do just that myself. <IMG SRC="smilies/beer.gif" border="0"> | |