Voltron
09-06-2001, 11:13 PM
So I'm wondering how to run my ARBs off of a York.
What switching/relays/valving is this gonna take?
I wanna be able to switch the ARBs on and have the compressor cycle when it needs to, but still have a manual switch to fill tires, run tools, etc...
Anyone done it?
JIM3030
09-07-2001, 06:28 AM
go to onboard air they have some good tanks with a few ports, pic one for your arb put a filter & regulator & switch on that line. the tank will collect oil too
ErikB
09-07-2001, 11:31 AM
Vova has a bunch O links to start doing some research:
http://members.nbci.com/_XMCM/vovae/onboard.htm
Its not as hard as you might think.
Dan-H
09-07-2001, 12:17 PM
nasvik has a good writeup here http://www.jeepshots.com/tech/air.html
Kendo
09-07-2001, 12:51 PM
All I did was hook up the OBA like one would normally, then I 'T'd" off the tank and ran manual toggle switch to activate the locker. I also installed a regulator on that line and regulated my pressure to 90 psi. Got everything from McMaster-Carr online.
http://www.mcmaster.com
Part Number: 62475K24 for the toggle switch.