|
SeanP 08-14-2002, 08:22 PM http://www.bugsandbuggies.com/images/swayaway/LimitStraps.jpg Anybody use these limiting straps? Any idea what the hole diameter is? I was just going to weld pairs of tabs on the axle and frame and run a bolt thru these. Does that sound right? SeanP RockRover 08-14-2002, 08:30 PM Yup... --D jeeper111 08-14-2002, 09:01 PM I am getting the ones from avalanche but that is exactly what I am doing. PIG 08-14-2002, 10:42 PM Originally posted by SeanP http://www.bugsandbuggies.com/images/swayaway/LimitStraps.jpg Anybody use these limiting straps? Any idea what the hole diameter is? I was just going to weld pairs of tabs on the axle and frame and run a bolt thru these. Does that sound right? SeanP Sean, if you go with SAW straps let me give you a little tip. They strech about 10%. Example: If you want some 20's go with 18's SeanP 08-14-2002, 10:53 PM Originally posted by PIG Sean, if you go with SAW straps let me give you a little tip. They strech about 10%. Example: If you want some 20's go with 18's Good to know, thx. Now I just gotta ramp and measure what length will work. The next project will be bumpstops. Although when I camp I can shave using the reflection from the shiny coil towers:p SeanP | |