89hawk
12-10-2008, 09:26 PM
12mmx 1.0-6H Thread Gauge Go / No Go Made by Swanson. Very nice shape.
$25
2 Torque Screw Drivers made by Mountz. Model - Minor
One worn One good shape. Both work well.
For Details see
http://www.mountztorque.com/html/tls_torque_screwdriver.htm
$15 for both
Also have a Hole Gauge
This gauge uses a tappered pin to slide into a hole. Where the pin bottoms out will read on the dial.
Measures hole diameters from .03 to .12" in .001" increments
Made by SPI Model #130
It is in decent shape. The panit on the body is scratched.
Case is in rough shape. Missing the hole check part
Located in San Jose. Shipping $6 for 1 or 3 items
$25
2 Torque Screw Drivers made by Mountz. Model - Minor
One worn One good shape. Both work well.
For Details see
http://www.mountztorque.com/html/tls_torque_screwdriver.htm
$15 for both
Also have a Hole Gauge
This gauge uses a tappered pin to slide into a hole. Where the pin bottoms out will read on the dial.
Measures hole diameters from .03 to .12" in .001" increments
Made by SPI Model #130
It is in decent shape. The panit on the body is scratched.
Case is in rough shape. Missing the hole check part
Located in San Jose. Shipping $6 for 1 or 3 items