michelroy18
12-15-2008, 05:02 PM
I have a nice Ford 302 that i would like to swap for more HPs with an 5.8 ltr from a E150 1996 but i would prefer to use two barils carb instead of EFI.
I am planning to swap the intake for a new 351 Windsor Eldebrook intake and use my carb,
Is anybody did a similar swap? Is there any other mod. to do?
Thanks for your input.
f250rollinon37s
12-15-2008, 09:20 PM
bolt on and go - but the dizy must also be changed - why ditch the EFI ? and a 2 brl ? thats kinda small for a 351 ( and the 96 5.8 is a roller cam to boot )
jrod66 has a 93 5.8 with a edelbrock performer intake, mustang headers and a 600 cfm carb - with an hei - on his DD, and it works ok
FordFascist
12-15-2008, 09:26 PM
Do this. You will thank yourself. Carbs are gay, especially when you have all the stuff.
http://www.pirate4x4.com/forum/showthread.php?t=704649&highlight=
jopes
12-15-2008, 10:41 PM
carbs suck. I am so glad I EFI'd my 400
michelroy18
12-16-2008, 08:05 AM
bolt on and go - but the dizy must also be changed - why ditch the EFI ? and a 2 brl ? thats kinda small for a 351 ( and the 96 5.8 is a roller cam to boot )
jrod66 has a 93 5.8 with a edelbrock performer intake, mustang headers and a 600 cfm carb - with an hei - on his DD, and it works ok
Sorry to ask a dummy question but what is a dizy?