extendO cab swap ranger (lots of pics)

[twistedranger]

Some what finished product
http://i26.photobucket.com/albums/c110/MarioPortale/bachler/IMG_3082.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/bachler/IMG_3071.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/bachler/IMG_3019.jpg

Time for the cab swap
So sad no more smashrail
http://i271.photobucket.com/albums/jj132/Section8krawlers/swap018.jpg
http://i271.photobucket.com/albums/jj132/Section8krawlers/swap016.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3899.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3868.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3869.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3867.jpg

[twistedranger]

I cut the rockers so that the sliders can sit 2 inches higher
http://i26.photobucket.com/albums/c110/MarioPortale/100_3859.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_3858.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_3857.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_3856.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_3855.jpg

[twistedranger]

Death of the smashrail2000 and the whiterhino
http://i26.photobucket.com/albums/c110/MarioPortale/100_3860.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_3861.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_3862.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_3863.jpg

brought it to sims for scrap money

[twistedranger]

I made a section of frame to fit the extended cab. Im am going to try and toooob the rest
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3871.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3872.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3873.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3874.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3875.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3876.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3877.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3878.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3893.jpg

[twistedranger]

I started making the shifters
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3879.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3890.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3889.jpg

I extended and plated the sliders
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3895.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3894.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3888.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3887.jpg

[twistedranger]

I picked up the body today, getting ready to set it on the frame.
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3896.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3897.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3898.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3901.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3903.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3902.jpg

I got the body off and cleaned up
http://i26.photobucket.com/albums/c110/MarioPortale/100_3910.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3911.jpg

I finished plating the frame with 3/16 so it wont break again.
http://i26.photobucket.com/albums/c110/MarioPortale/100_3907.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_3905.jpg

[twistedranger]

getting it ready for the body
http://i26.photobucket.com/albums/c110/MarioPortale/100_3908.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_3909.jpg

I had to cut the muffler down in order to clear the body
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3912.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3913.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3914.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3915.jpg

[twistedranger]

Made some more fram plates
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3919.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3918.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3916.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3917.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3920.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3928.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3923-1.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3922-1.jpg

[twistedranger]

Fire wall
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3926.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3927.jpg

front clip
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3942.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3941.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3940.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3936.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3933.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3934.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3935.jpg

[twistedranger]

installed the line lock
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3947.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3948.jpg

Link it
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3931.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3930.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3929.jpg

rear clip
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3943.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3944.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3945.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3946.jpg

[twistedranger]

chopped the rear up
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3952.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3953.jpg

super bender at mikes house
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3954.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3955.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3956.jpg

super raptor claw
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3962.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3960.jpg

[twistedranger]

ground the diff to clear the truss.

http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3964.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3967.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3968.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3969.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3975.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3977.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3976.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3979.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3982.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3983.jpg

[twistedranger]

so heres the truss. so many holes but it will look better once the two holes closest to the diff are filled with an LED brake light. I have them one the chevy but i cant find them an more.
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3984.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3986.jpg

[twistedranger]

I almost finished the upper link
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3989.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3990.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3991.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3992.jpg

I stated making the lower links at mikes thanks to joshes tubing but then I ran out of welding wire.
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3993.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3994.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_3995.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4000.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4001.jpg

[bigDREW]

sick ass ranger dude. keep up the good work. Are you going to be putting a bed on it or anything?

[twistedranger]

Started the lower links
http://i26.photobucket.com/albums/c110/MarioPortale/100_4004.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_4003.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4002.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4006.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4007.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4012.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4008.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4010.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4009.jpg

[twistedranger]

link it
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4014.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4015.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4016.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4017.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4025.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4028.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4029.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4031.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4034.jpg

[twistedranger]

super diamond i still need to finish it and back light it.
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4030-1.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4032.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4033.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4034.jpg

[twistedranger]

Ya so I started bending the tubing, mike came over everyday this week and we have made a lot of progress. The master of all tubing and notch Mr kev came over and helped us with the complicated stuff

http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4040.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4041.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4042.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4043.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4044.jpg

[twistedranger]

http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4045.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4046.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4047.jpg

I have almost all the tubing bent now I just need kevs help notching it all. Only thing left is the windsheild bar and a little bit left on the roof

[svt150j49]

pimpin!:smokin:

[twistedranger]

http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4073.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4074.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4075.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4075.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4077.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4079.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4081.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4083.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4084.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4085.jpg

[twistedranger]

http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4086.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4087.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4088.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4089.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4090.jpg

Drive line next
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4078.jpg

[twistedranger]

its painted and welded
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4091.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4092.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4093.jpg

[twistedranger]

my anti-rock came today so sic i didnt think it was going to work because it was a tj kei but it will be perfect
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4108.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4107.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4112.jpg

[truck-oholic]

What is the point of the 'raptor claw' design? Aesthetics? Or will the hooks/claws serve some purpose as well?

[WHITE RHINO]

just for looks. my ranger is way better mario

[f250rollinon37s]

me like :D

[Brocko2]

Wow!

[twistedranger]

What is the point of the 'raptor claw' design? Aesthetics? Or will the hooks/claws serve some purpose as well?

I drilled the center out and put a half inch bolt through it so it serves as a center limiting strap mount. This way the truck does not unload when going down ledges

http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/IMG_3014.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/IMG_3074.jpg

you can kinda see it there

[twistedranger]

i ran stocker shafts forever and never broke them, but i decided to upgrade
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4104.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4103.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4102.jpg

[zainyD]

Awesome Ranger dude!!!! Very nice work!

[Loki89t]

Badass Ranger :smokin:

[truck-oholic]

I drilled the center out and put a half inch bolt through it so it serves as a center limiting strap mount. This way the truck does not unload when going down ledges
you can kinda see it there

Gotchya.

[twistedranger]

thanks, It took forever.

to bad i blew the crap put of the front drag racing the White Rhone. I hit the 4wheel drive shifter when I was hammer down and ripped the front off. So he wins the battle of the rangers for now.

So i need to find a 60 to replace the dana 50 I have

[WHITE RHINO]

hahahah that was a crazy day

[twistedranger]

hahahah that was a crazy day

http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/345545002_1186597741_0-1.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/345612746_1186848654_0.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/346494989_1190062783_0.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/345968654_1188159275_0.jpg

I broke everything

[Stranger ranger]

thats fawkn spectacular

[zdaily]

Sick ranger. I love the attention to detail on your fab work.

[travisford83]

I really like the attention to detail. I saw your rig in person a month or two ago in San Jose, near a clients house. The dove nose looks great.

[WHITE RHINO]

poor lil ranger hahaha
http://i271.photobucket.com/albums/jj132/Section8krawlers/prarie%20city/DSCN4505.jpg
http://i271.photobucket.com/albums/jj132/Section8krawlers/prarie%20city/DSCN4526.jpg
http://i271.photobucket.com/albums/jj132/Section8krawlers/prarie%20city/DSCN4521.jpg

[bigDREW]

how much did you take out of the front clip when you dove nosed it? Pics of the dove nose to please. I like the tube that you have put on that beast. Keep up the good work

[NetBSD]

http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/345545002_1186597741_0-1.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/345612746_1186848654_0.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/346494989_1190062783_0.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/345968654_1188159275_0.jpg

I broke everything

do it again, i missed it :flipoff2:

[twistedranger]

I really like the attention to detail. I saw your rig in person a month or two ago in San Jose, near a clients house. The dove nose looks great.

thanks i thought I would try something different the baja fenders work perfect for that because they are molded high enough to where the tires don't hit. The stock fenders needed to be trimmed to much.

[twistedranger]

I had the break on video but of course the tape was bad. The lower link broke and got shoved a foot into the ground. I wouldnt have been as bad if I had it on tape because then I would have something to show for.

[twistedranger]

how much did you take out of the front clip when you dove nosed it? Pics of the dove nose to please. I like the tube that you have put on that beast. Keep up the good work

I took 4 inches out of the windshield, i think 10 out of the grill, but then i had to take 4 out of the hood because I pulled the fenders back to fit the doors and the angle of the pinch.

http://i26.photobucket.com/albums/c110/MarioPortale/bachler/100_4038.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/bachler/100_3933.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/bachler/100_4050.jpg

[twistedranger]

I dont have any close ups of it, this is all I have right now.
http://i26.photobucket.com/albums/c110/MarioPortale/bachler/DSCN5129.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/bachler/DSCN5143.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/bachler/DSCN5144.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/bachler/DSCN5140.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/bachler/DSCN5138.jpg

[big specht]

Looking good:D

[twistedranger]

thanks, time for a new front 60. Im going to start over on the front axle and try something new

[twistedranger]

the break ripped the bottoms out of the air shocks
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4203.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4204.jpg
and it broke the pinion
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4205.jpg

[twistedranger]

Down South Motor sports hooked it up with some new rod ends for a really good price.
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4202.jpg

I also decided to upgrade my hydo setup
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4207.jpg

[redranger4.0]

Down South Motor sports hooked it up with some new rod ends for a really good price.
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4202.jpg


In the picture it looks like the shaft got messed up along with the rod ends. Is it salvagable?

[twistedranger]

ya the ends got flared so I cant screw the new ends in. I need to cut an 1/8 inch off both shocks to get to the clean threads and it will work fine.

[twistedranger]

got sum new parts like a 60
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4206.jpg


it was rusted to the max so i spent all day cleaning it

[twistedranger]

got the knuckles plated for now
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4217.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4218.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4220.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4219.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4221.jpg

[WHITE RHINO]

looking good im waitin to see what you do for the 5th stud

[twistedranger]

this was totally not worth doing im i it like 600 bucks in labor and they will probably break the first run gay. I don know what i will do for the 5th stud i have to see what the new arms look like.

[WHITE RHINO]

yeah yeah yeah i hope mine last plus your running those little tires

[twistedranger]

im gona run 53s and explode everything. I need to get my parts to get this thing going

[twistedranger]

I finally got my truck out of the field with the help of o mega forklift
http://i26.photobucket.com/albums/c110/MarioPortale/100_4227.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_4228.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_4229.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_4230.jpg

[twistedranger]

http://i26.photobucket.com/albums/c110/MarioPortale/100_4232.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_4233.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_4234.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_4235.jpg

[twistedranger]

Way easier then trying to jack it up
http://i26.photobucket.com/albums/c110/MarioPortale/100_4236.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_4237.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_4238.jpg

[WHITE RHINO]

that was pretty awesome hahahah

and heres proof mine is better
http://i271.photobucket.com/albums/jj132/Section8krawlers/white%20rhino%20pics/fordyce164.jpg
http://i271.photobucket.com/albums/jj132/Section8krawlers/white%20rhino%20pics/fordyce021.jpg

[dirtydodge1]

got to love a lil competition/shit talkin between friends

[twistedranger]

its the battle between rangers. I broke mine racing him but i was still faster then it exploded

[twistedranger]

who is better now old school dana 44 back when we had trucks not buggies
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/IMG_4742.jpg

[WHITE RHINO]

battle between rainjas huh so we arent friends now? hahahah

faster my ass!!!!!!!!!!! i won biotch and almost rolled around the corner

http://i671.photobucket.com/albums/vv72/jkierduramax06/521.jpg
http://i671.photobucket.com/albums/vv72/jkierduramax06/519.jpg

[twistedranger]

All I need 20 feel of DOM to finish all my tube work then im done for a bit.
dang my truck is jacked but yours is just as bad right now haha
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/IMGP0295.jpg

[twistedranger]

This is what the truck looked like when I got it.
http://i26.photobucket.com/albums/c110/MarioPortale/p10.jpg
Then I rolled it
http://i26.photobucket.com/albums/c110/MarioPortale/pis1.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/brad.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/grill.jpg
So I decided to upgrade
http://i26.photobucket.com/albums/c110/MarioPortale/fallin.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/half44.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_0430.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_0432.jpg

[twistedranger]

This is the frame I started with, which is under my truck now
http://i26.photobucket.com/albums/c110/MarioPortale/100_0077.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_0106.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/d9e7c75b.jpg

[John82601]

Awesome build up, love seeing a little history too. Keep it up!

[WHITE RHINO]

i win wheel it this sunday you can ride shotty

[twistedranger]

I finished the sliders, plating the frame, plating the knuckles, and drilling speed holes. I will never be done if I dont get my parts

[twistedranger]

I stripped the rear in my garage and put the axle under it
http://i26.photobucket.com/albums/c110/MarioPortale/100_0333.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_0338.jpg

I cut the rear frame and moved the hangers to fit the bed
http://i26.photobucket.com/albums/c110/MarioPortale/Picture163.jpg

Setting the bed back on before I sectioned http://i26.photobucket.com/albums/c110/MarioPortale/Picture172.jpg

This is the bed after I took 10 inches out of the middle
http://i26.photobucket.com/albums/c110/MarioPortale/100_0511.jpg

I cut 20 inches out of the tail gate to duv tail it
http://i26.photobucket.com/albums/c110/MarioPortale/000_0013.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/000_0014.jpg

I decided to make a tailgate that opened
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/mas011.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/mas012.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/mas013.jpg

[twistedranger]

http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/mas014.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/mas015.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/mas016.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/mas017.jpg

I just have the body sitting on the front axle waiting for the air shocks
http://i26.photobucket.com/albums/c110/MarioPortale/Picture166.jpg

This will be close to actual ride height
http://i26.photobucket.com/albums/c110/MarioPortale/Picture043.jpg

Heres the 16 inch travel air shocks
http://i26.photobucket.com/albums/c110/MarioPortale/4d7890be.jpg

[twistedranger]

Started putting stuff together
http://i26.photobucket.com/albums/c110/MarioPortale/100_0302.jpg

Deigned some half doors and getting them ready for paint and some beverages
http://i26.photobucket.com/albums/c110/MarioPortale/100_1632.jpg
htp://i26.photobucket.com/albums/c110/MarioPortale/100_1719.jpg

Mounted the CO2 system After cutting the floor to clear the cases
http://i26.photobucket.com/albums/c110/MarioPortale/100_1859.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/21ac8373.jpg

Got the 1000 pound GM203 to do my doubler kit
http://i26.photobucket.com/albums/c110/MarioPortale/100_1590.jpg

Took the low-range box off and cleaned it up
http://i26.photobucket.com/albums/c110/MarioPortale/100_1593.jpg

I got the Ford 205 ready for paint
http://i26.photobucket.com/albums/c110/MarioPortale/100_0508.jpg

[twistedranger]

This it the shaft Joe dolla tig welded up for me it should hold.
http://i26.photobucket.com/albums/c110/MarioPortale/100_1857.jpg

I had to strip this TH350 down to get that stupid shaft.
http://i26.photobucket.com/albums/c110/MarioPortale/100_1743.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_1742.jpg

Heres the cases all mounted up with the Kit Travs Dad made and ORDs.
http://i26.photobucket.com/albums/c110/MarioPortale/100_1858.jpg

This is what it will look like under the truck, its about 20 feet to long
http://i26.photobucket.com/albums/c110/MarioPortale/100_1744.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_1745.jpg

I got a little carried away with the painting
http://i26.photobucket.com/albums/c110/MarioPortale/100_1722.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_1747.jpg

Her is the cases all mounted up
http://i26.photobucket.com/albums/c110/MarioPortale/tcase.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/T-casebraket.jpg

[twistedranger]

I had to make frame plates to keep from ripping off my links
http://i26.photobucket.com/albums/c110/MarioPortale/105.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/106.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/108.jpg

I moved the body mounts up to clear the links during up travel
http://i26.photobucket.com/albums/c110/MarioPortale/Picture041.jpg

Started building the front truss for the upper links and the Hydo steer
http://i26.photobucket.com/albums/c110/MarioPortale/Picture042.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/110.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/4link.jpg

[twistedranger]

PSC hydo in a box
http://i26.photobucket.com/albums/c110/MarioPortale/Picture127.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Picture130.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Picture131.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Picture129.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Picture128.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Picture210.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Picture207.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Picture208.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/pump.jpg

[twistedranger]

Home made Hi steer
http://i26.photobucket.com/albums/c110/MarioPortale/Picture209.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Picture206.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/brake.jpg

Reservoir Braket
http://i26.photobucket.com/albums/c110/MarioPortale/bracket.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/pscmounted.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/resivor.jpg

[twistedranger]

i finished the shifters, patched the floor to keep the heat and noise out, sprayed bed liner in the cab and installed my system so i can be gangster now
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4276.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4275.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4278.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4273.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4274.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4271.jpg

All be big pimpin

[Revenant]

This project is awesome. I like attention to detail and the blue that's being used. What color blue is it and where do you get it? It reminds me above a 'Viper Blue' I used on some RCs.

Thanks.

[twistedranger]

Thanks, kragon auto has the paint. Its a Dupli-color paint called bahama blue, T401 (thats a gay name)

[Wes Mhantooth]

hey man, i have to say.... your shit always looks so good.
god dam. keep it up. let me see more...

[twistedranger]

thanks man, I just got a ton of parts from anything scout so there should be a lot of progress now.

[Nor Cal Wheelin]

What up man, things looking killer. Dude, Its way better than Mikes.:laughing:


Hey on a serious note... Can I check out your pass side steering arm sometime. I am going to need to run a high steer arm on my ranger for cross over steering, and I am having a fawked time finding shit that doesnt cost half a billion dollars. All the kits I can find, look just like yours...??

[WHITE RHINO]

god damn it jeremy

[Nor Cal Wheelin]

:flipoff2:

They're both pretty cool. Mine will grow up one day too..., I hope.:homer:

[WHITE RHINO]

let me know ill help out

[WHITE RHINO]

oh and i did design marios cage hahahaha but hes helped me alot

[twistedranger]

you only designed two of the bars haha


bent some tube at mikes and got more parts
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4350.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4347.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4348.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/Krawler/100_4349.jpg

[twistedranger]

started making the truss
http://i26.photobucket.com/albums/c110/MarioPortale/roll/100_4353.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/roll/100_4354.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/roll/100_4352.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/roll/100_4358.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/roll/100_4359.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/roll/100_4361.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/roll/100_4362.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/roll/100_4363.jpg

[twistedranger]

Welded the front up going to explode. Kev and mike came over got the gears set up. 5.38s

http://i26.photobucket.com/albums/c110/MarioPortale/roll/100_4355.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_4356.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/100_4364.jpg
http://i26.photobucket.com/albums/c110/MarioPortale/roll/100_4365.jpg

[Bray D]

Welded the front up going to explode.

That's not gonna last long. Why didn't you weld to the carrier?

[WHITE RHINO]

it will last forever Mario drives like a little girl

[twistedranger]

haha ya right i taught you how to drive the rangers. Theres no place for it to go, if the spider gears brake im done anyways.

[1TONZR2]

nice man......I like the 205 mount, I am thinking about adding another one similar to that.

[twistedranger]

I would recomend adding another mount that thing ways 200lbs. It was easier to make a good strong mount suspending it from the top then tapping and mounting from the bottom. The lower skid plate also serves as a backup because it touching the bottom of the case

[twistedranger]

almost done with it finally

i had to cut the oil pan to fit the link set up
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4390.jpg
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4392.jpg
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4391.jpg

the links bend around the pan
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4389.jpg

http://i714.photobucket.com/albums/ww148/mariobrother70/100_4394.jpg
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4395.jpg

[twistedranger]

cut the frame to clear the ram

http://i714.photobucket.com/albums/ww148/mariobrother70/100_4412.jpg
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4411.jpg

cut the pan to clear the link

http://i714.photobucket.com/albums/ww148/mariobrother70/100_4413.jpg
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4414.jpg
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4415.jpg

[twistedranger]

finished the truss

http://i714.photobucket.com/albums/ww148/mariobrother70/100_4404.jpg
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4405.jpg
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4407.jpg
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4409.jpg
http://i714.photobucket.com/albums/ww148/mariobrother70/100_4351-1.jpg

[LegendKiller89]

Damn that looks good man. :smokin:

[twistedranger]

thanks now i have to build a plate in front of the lower tube because it dents way to easy and its DOM

[crawlin91]

Ive read this build thread several times, damn good work, how about an update?