I just wanted to double check that If I replace the coil springs to get about 2" of lift the eccentric(sp?) will be able to take up the camber to align it properly. Does anyone know how high you can go before having to change the axle pivot brackets? Thanks.

I was doing the same research a while back. You can do a 2" lift without having alignment problems. Your best bet would be coil spacers, and actually if you are interested in doing a 2" lift I have a pair of poly plastic spacers I bought last year and never installed that I would be interested in selling to you. Let me know with a pm or an email Kenheehn123@aol.com