|
: Mis-matched AK Kit from Apex Doc Holiday13 12-22-2008, 09:58 AM It looks really really good. I can't quite tell about the bore because although I can see rifling, I can't tell how good it is because there is a bunch of cosmoline in it. Not much rust. Its just missing a bunch of receiver jht3 12-22-2008, 06:04 PM interesting. i have one of the matching kits and the bore is full of gunk too. my receiver is also missing part of the lightening cut so it's not as pretty. otherwise it LOOKS to be in great shape based on a quick review now just gotta find some side panels animator 12-22-2008, 06:17 PM Does the bolt match the receiver? Kinda hard to tell, but it looks like the bolt has some lightening cuts on it, which should not be found on a milled receiver... but again, it's kinda hard to tell. Also, does the folding stock lock up tightly? Or is it loose at all? On both of my 64 kits, the stock was unaceptably loose. I had to fill in some of the holes with weld and reshape them to get the stock anywhere close to tight. jht3 12-22-2008, 06:46 PM mine locks up real tight furniture is in great shape. should clean up well it has a strange brake on the front and is flush with the barrel. not like the slant brake i'm used to anyone got a charger for a canon s45? lost mine, so no pics :mad3: animator 12-22-2008, 06:49 PM it has a strange brake on the front and is flush with the barrel. not like the slant brake i'm used to that's called a muzzle nut. It does nothing but protect the threads on the muzzle. Doc Holiday13 12-23-2008, 04:57 AM Does the bolt match the receiver? nope Kinda hard to tell, but it looks like the bolt has some lightening cuts on it, which should not be found on a milled receiver... but again, it's kinda hard to tell. nope Also, does the folding stock lock up tightly? Or is it loose at all? On both of my 64 kits, the stock was unaceptably loose. I had to fill in some of the holes with weld and reshape them to get the stock anywhere close to tight. Nice and tight. Just dirty First order of business is to get some plates jht3 12-23-2008, 04:23 PM that's called a muzzle nut barrel nut huh. looks like i'll replace this w/ a US made slant brake First order of business is to get some plates what's your plan for that? inquiring minds wan to know | |