PDA

View Full Version : degreed axle shims

DIY4X
12-26-2008, 05:49 PM
New to the site,

$40.00 pair solid steel! Complete with new centering pins. I'll be modding the list to include a 3 piece set for the Dana 60's over the weekend.

Bottom side has a flat for the pin head to sit in.

http://diy4x.com/cart/image/cache/Degreed%20Axle%20shims-400x400.jpg
guidolyons
12-26-2008, 06:52 PM
Kert,

What degrees do you have available? I'm looking for some 8* shims.

Thx,

Guido
CDA 455
12-26-2008, 07:21 PM
I need a 15* shim for my front Dana 70 pumpkin-perch side.
DIY4X
12-26-2008, 07:28 PM
Kert,

What degrees do you have available? I'm looking for some 8* shims.

Thx,

Guido


6* is up and running now. 4,8 and 10 are coming stat!
DIY4X
12-26-2008, 07:29 PM
I need a 15* shim for my front Dana 70 pumpkin-perch side.

Holy Shnikes! I'd have to source some thicker material to start with.
CDA 455
12-26-2008, 07:40 PM
Holy Shnikes! I'd have to source some thicker material to start with.



I'm tempted to ship the axle housing to you to do (As well as doing the driverside perch) :) .
DIY4X
12-26-2008, 08:38 PM
I'm tempted to ship the axle housing to you to do (As well as doing the driverside perch) :) .



Box it up!
DIY4X
01-01-2009, 11:24 PM
8 and 10 are up on the site and available now.

Also put up 3 piece option for all degrees for Dana 60's. Third shim for on top of the spring pack under the spring plate, so your studs get loaded evenly.
CDA 455
01-02-2009, 04:51 AM
Box it up!




Don't tempt me :flipoff2: !
guidolyons
01-02-2009, 06:02 AM
8 and 10 are up on the site and available now.


Thanks Kert! Just what I needed. I ordered a set of 8* shims:grinpimp:
DIY4X
01-03-2009, 07:24 PM
Thanks Kert! Just what I needed. I ordered a set of 8* shims:grinpimp:


:grinpimp:
DirtWorshiper
01-06-2009, 05:03 AM
I'll be ordering an 8* three piece set for my Dana 60 in the next day or so.
FbOmRxD
01-07-2009, 06:52 PM
any word on the 4* yet?
DIY4X
01-07-2009, 07:29 PM
any word on the 4* yet?

Steel was ordered up and should be ready very soon!
guidolyons
01-10-2009, 07:06 AM
Thanks Kert :grinpimp:
That was quick.
Got them on Wednesday.

Steeeeekers, too! :smokin:
DIY4X
01-10-2009, 09:22 PM
Thanks Kert :grinpimp:
That was quick.
Got them on Wednesday.

Steeeeekers, too! :smokin:

Always good to hear they make it there quick. Thanks for the biz!:D
DIY4X
01-14-2009, 07:26 PM
any word on the 4* yet?

Should have the 4 degree shims ready this weekend:smokin:

Thanks for all of the orders:D
DIY4X
01-18-2009, 10:49 AM
4* are now on the shelf.:grinpimp: Hope to have them on the website in a few days. Otherwise give us a call and we'll get them shipped out. DIY4X (http://www.diy4x.com/suspension.htm)
DIY4X
01-20-2009, 05:50 PM
The wesite has been updated! Come and get them.:grinpimp:
DIY4X
01-28-2009, 10:24 AM
Thanks for all the orders!
dezrik
02-01-2009, 07:21 PM
Do these shims have a pin head on the bottom, I'm having problems with the shims i currently have they like to walk out of the spring pad :(
Prohibited
02-02-2009, 11:21 AM
Do these shims have a pin head on the bottom, I'm having problems with the shims i currently have they like to walk out of the spring pad :(

They bolt in to the spring pack. So the spring pin is still in the proper position and they can't spit out.
dezrik
02-02-2009, 07:42 PM
They bolt in to the spring pack. So the spring pin is still in the proper position and they can't spit out.

Thanks Ill be picking up a set :)
DIY4X
02-08-2009, 01:15 PM
Thanks!
DIY4X
02-13-2009, 07:55 PM
Very popular product for us:smokin: Thanks Pirates!!
DIY4X
02-20-2009, 06:44 PM
bump
DIY4X
02-27-2009, 11:03 AM
Top
DIY4X
03-05-2009, 12:19 PM
bump
DIY4X
03-12-2009, 08:02 AM
btt
laybac101
03-12-2009, 01:47 PM
is it possable to get a shim that will also move the axle back about 2 inches???
DIY4X
03-23-2009, 07:43 PM
Not at this time.
dt5150
04-03-2009, 08:06 AM
2.5" wide, 4* shims with 3/8 x 4" long center pins shipped to 03246.
dt5150
04-03-2009, 10:05 AM
nevermind..
DIY4X
04-14-2009, 03:48 PM
Top
DIY4X
04-23-2009, 08:24 PM
btt
DIY4X
04-27-2009, 07:49 PM
Top
94toytruck
04-27-2009, 07:57 PM
These things are beefcake for sure. I've been running them for a bit now and they are working out well for me.
DIY4X
05-02-2009, 11:41 AM
These things are beefcake for sure. I've been running them for a bit now and they are working out well for me.

Thanks man:grinpimp:
DIY4X
05-13-2009, 02:11 PM
Bump
SLEDGE
05-18-2009, 11:12 PM
Just bought some shims... Thanks man.....
SLEDGE
05-26-2009, 10:44 PM
a man I ordered some d60 shims last week and havent heard a thing.... paypal sent me a recipt that says you got paid. Did it get lost? wtf? Tried to pm u but ur inbox is full.
DIY4X
05-27-2009, 08:36 PM
a man I ordered some d60 shims last week and havent heard a thing.... paypal sent me a recipt that says you got paid. Did it get lost? wtf? Tried to pm u but ur inbox is full.

Call me tomorrow and we'll see what's up. Everybody in the shop is backed up right now and going as fast as we can.
SLEDGE
05-27-2009, 10:02 PM
got the shipping order today, says to expect a package... Thanks man.
scouthead
06-08-2009, 08:55 AM
any chance of 12 degree shims for the front of my blazer?
DIY4X
06-16-2009, 07:22 PM
any chance of 12 degree shims for the front of my blazer?


Sledge, Thank you!



Scouthead, Unfortunatley we don't have material thick enough to start with. We could bring in a small piece from an outfit we work with from time to time for small quantities but prices for the material are triple give or take.

A bit more expense. Let me know if you want me to get a quote together or call.
DIY4X
07-15-2009, 10:42 PM
Top
DIY4X
08-10-2009, 10:08 PM
Top
DIY4X
08-28-2009, 05:23 PM
Bump
DIY4X
09-16-2009, 08:43 AM
Check out our new website!
DIY4X
10-26-2009, 07:03 AM
All four sizes are on the shelf!
mike4089
10-26-2009, 07:27 AM
do you have a pic of the 3 piece kit for the dana 60 in 6 degree...i just dont fully understand how the 3rd piece works...but i have a feeling these will be exactly what i need and will put an order in asap