Post your Rover stuff here. ONE post only! Please edit and/or remove your ad when item is sold. One post per member! :uk:

Buyers:
Have questions for seller, use PM or e-mail. DO not post questions in the thread!

Sellers:
Buyers asking the same question over and over, Edit your post to answer these questions. Or place an ad in the regular P4x4 classifieds and link it here. If your location is not in your profile, please post it in your ad. Your Zip code will help buyers with shipping cost estimates.

Please price your items,this isn't Ebay!

All parts are located in CO(80433). Feel free to make an offer if you see something you like. Email for pics(brendonloveday@hotmail.com). Buyer pays shipping on all products.
For pics visit http://s706.photobucket.com/albums/ww70/Colorover/Defender%20110%20Parts%20for%20Sale/

*Paypal Users- Did you know if you select personal rather than purchase when sending money both the buyer and seller can avoid the fees!

Aftermarket Parts-
-Safarigard D90 3 link crossmember, fresh powdercoat, $350
-SG style rock sliders(new/complete with mounts/hardware) for D90, $400
-30 Spline ARB Air Locker for Rover Diff, no longer available from ARB, $250
-Steering box for D90, drilled/tapped for hydraulic assist, tapped/rebuilt by West Texas Offroad, $200
-EBC Brake Rotors for D110 Front Axle: slotted/drilled, new in box, $85 pair
-Rear tire carrier dogbone piece, custom that doesn't use bushings, $75
-Rovertym Disco II style adjustable Ft Shock Mounts, $180
-X-Eng X-Spring Kit for 90 or 110, $200
-D90 Galvanized Full Roof Rack, inclds roll bar mounts, ladder, jerry can mnt, highlift mnt, $400obo


1995 D90 Stock Parts-
Clutch Plate, $50
Pitman Arm, $20
Thirds, just the shells, drilled for ARB's, $20ea

1993 NAS 110 Stock Parts-
-Front Axle Complete: $250 w/stock radius arms, $200 w/o arms
-Front Bumper, needs fresh powder coat, but its straight $40
-Clutch plates, $50ea
-Rear Trailing Arms, $40
-Door Sills, $80
-Clutch Pedal Assembly w/master cylinder $50
-A/C Main Box(cracked), Duct, Condenser, Hoses $100(Fans are sold)
-A/C Compressor, $50
-Stock Center Console, $40
-Spedo cable, lower $10
-Ft. Vent Covers, black plastic, $20
-Upper Fan Shroud, $30
-Coolant expansion tank, and bracket, $40
-Brake Fluid Resivoir, $20
-Rear Stop/Turn Lamp Assemblies Complete, $80ea
-Side Marker Lamp Assemblies, $10ea
-PS Pump, Starter, Clutch Slave cylinder, $50ea
-Ft. Cover Parts, Pullys and brackets, $50 set
-Ft. tie rod w/steering stabilzer, $30
-Driveshafts, $50ea
-Panhard Rod, $20

-Disco 1 frame w/axles(body still on it, no engine/trans/t-case), have title, good for building an Rockware RR Buggy, free if you haul it away

Really gotta try and get rid of it this time. Gotta for pay rent and school.


1983 Range Rover Classic converted to soft top. Full roll cage, custom aluminum dash and gauge pod, Beard suspension seats, OME suspension. Smogged and registered. Good offroad toy or could be daily driver. Email for more info. $2800

wdillonmcdonald@gmail.com

Pics here...

http://s225.photobucket.com/albums/d...0Rover%20Pics/

Password is 123456

Double Cab Land Rover Pickup Truck

For sale is my 1980 Left hand drive double cab land rover pickup truck. It has a Land Rover five cylinder turbo diesel engine, cloth interior, ARB air locker in rear(heavy duty rear end), aftermarket engine/cab heating system, bull bar, spare tire on hood. It also has a canvas cover over the pickup bed. Tires are BFG with perfect tread. Serious inquires only please to email address. May consider some type of trade in. Thank you Priced at $45,000

email
Jim@firstfinancialmanagement.com

photo at
http://www.landroverexchange.com/listings/photo/

Sorry

this is the link for some photos of the pickup truck

http://www.firstfinancialmanagement.com/auto.htm

DII SD Rack for sale. $800 great condition. repainted 6 months ago.

located in Auburn, Al, but willing to deliver within a resonible distance or ship. pm me.

Two used A/C compressors:
1) unknown history, purchased as a spare, no clutch: $10
2) came off my '95 Disco when I overhauled the entire A/C system; this was in working condition when I replaced it. Clutch for serpentine belt works. $25
These should fit serpentine-belt equipped Range Rovers with the 3.9 or 4.2, and maybe other years of Disco or RR?

ZF Auto filter kit (includes gaskets, etc). New, in package. $25.

One Discovery sunroof track mechanism. This is the mechanism that physically pops the sunroof up and moves it backwards or forwards (front and rear sunroofs use the same tracks). This does not include the sunroof motor, so this is to repair your broken tracks only. New, in package. $100.

Pertronix magnetic ignition pick-up for Land Rover (and Buick?) distributors. I bought this for my old 83' RR with 14CUX EFI...it was not happy triggering the EFI, either by itself or with the MSD ignition box I was trying to run (I suspect this was due to an impedance issue that Pertronix seems sensitive to)...so, I'd recommend for carb'd engines only. Installed, tried to run it for 10 minutes? $35

Prices do not include shipping. USPS MO, check, or PayPal accepted.

1971 Series II A 88 Land Rover Station Wagon
I am the second owner of Lucy. She still has the original dealer service stickers and name plate on her. Some details are as follows;

39000 miles
Parabolic springs
Koenig PTO winch
Mastercraft seats with quick release seat bases. The original seats (all of them) and interior come with the truck.
Original rust free bulkhead and frame.
Service records from when I bought her (~’96) plus miscellaneous spares.

PM me if you want photos
Asking $5500

Thunk you should know, Buck, your image does not show up, at least not for me. :(

Rocky Mountain Parabolics - New 2 leafs for Series III 88". 2 Front and 2 Rears. Still in shipping wrappers.$400.00 East Tn. 37857

well since the post above me has classic parts, how about i list a whole classic that i need to sell? :grinpimp:
1995 landrover county classic LWB wagon 4500 obo. entertain me with offers :D nice shape!
http://pirate4x4.com/forum/showthread.php?t=784174

well since the post above me has classic parts, how about i list a whole classic that i need to sell? :grinpimp:
1995 landrover county classic LWB wagon 4500 obo. entertain me with offers :D nice shape!
http://pirate4x4.com/forum/showthread.php?t=784174

Nice link:flipoff2:

i sold it :flipoff2:


so now i have an 01 BMW 530 for sale :D

I'm selling my truck because I can no longer afford this hobby and due to a theft causing the loss of many parts needed to finish this project I've got to dump it for a loss.

The axles were cut to fit by AZ Differential in Phoenix, they were done right and are spot on for the land rover. They were bought from a local phoenix wrecker off of a 2004 Super Duty. All of the suspension components used to make the 3 and 4 link are from Poly Performance and Ballistic. All links are 2.0x.25" DOM and all joints are 1.25" shank with F911 9/16" Bolts.

Some of the fab is a bit rough, but it works. The body is beat to living hell, as is the interior. It was broken into so its got a new rear window and 2 new front windows. It needs alot of work, and I dont know exactly how much I've spent on it but its alot. The speedo and odometer have not worked since the 1-ton swap, and it reads ~93K, I only have put about 1000 on it since the swap. Surface rust has only been there for a few weeks, its not deep or old rust. Front diff not installed but I have it.

Looking to get $3000. Located in Chicago IL, Pickup or buyer arrange shipping. I'm flexable on price, any serious offers considered. Have Title.

As a disclaimer, I do not intend to sell this as a street driven vehicle, under sale terms any future road use is done at your own risk and you will be required to sign documentation that you acknowledge this.


Specs:

2000 Land Rover Discovery
Black Exterior / Tan Interior
4.0L V8
ZF 4spd Auto
Land Rover LT-230 Transfercase
Dana 60 Front Axle (2004 Super Duty) (open)
Ford Sterling 10.5" Rear Axle (2004 Super Duty) (open)
3-Link Front Suspension
4-Link Rear Suspension
14" Bilstein 9100 Rock Crawler Front Coilovers w/ Reserviors
12" Bilstein 7100 Shocks w/ Reserviors
RTE 5" Rear Springs
Custom Currie Anti-Rock Front Anti-Sway Bar
Old Man Emu HD Steering Stabilizer
Phoenix Rack and Axle 1310 CV, 1410 at diff Rear Driveshaft
Superior 4.88 Rear Gears
Motive Gear 4.88 Front Gears
Rock Crawler 16x8" 8-Lug Steel Wheels (5 wheels and tires)
BFG MT 315/75/16" Tires (50%)
Polk audio 6.5" MOMO component speakers in all 4 doors
Optima XL Blue Top Battery

Whats missing:
Front Axleshafts
Front Driveshaft
Front Bumper
Rear Bumper
Spare Tire Rack
Front Turn Signal

Problems:
Needs a Head Gasket ($250 if you do it yourself, very easy)
Needs a Hydroboost Brake System to stop well
Needs a Radio / Headunit
Center Diff in T-case is rough
Needs a new front wheelbearing (unitbearing)
Needs a rear axleshaft if you want to wheel it
2 Heims on suspension are loose
Both Sunroofs need replacement guide rails
1 Blown Rear Shock
ABS is non-functional
Rear Shock Tabs on axle are just temporary
Exhaust dumps out under middle of truck
Needs new Cats

http://i13.photobucket.com/albums/a290/TheDonJohnson/DSCN1795.jpg
http://i13.photobucket.com/albums/a290/TheDonJohnson/DSCN1796.jpg
http://i13.photobucket.com/albums/a290/TheDonJohnson/DSCN1804.jpg
http://i13.photobucket.com/albums/a290/TheDonJohnson/DSCN1811.jpg
http://i13.photobucket.com/albums/a290/TheDonJohnson/DSCN1797.jpg
http://i13.photobucket.com/albums/a290/TheDonJohnson/DSCN1798.jpg
http://i13.photobucket.com/albums/a290/TheDonJohnson/DSCN1801.jpg
http://i13.photobucket.com/albums/a290/TheDonJohnson/DSCN1802.jpg
http://i13.photobucket.com/albums/a290/TheDonJohnson/DSCN1803.jpg

Professionally tapped for Hydro Assist
Never installed after rebuild
$250 plus shipping from 80129
I also have a modified D2 pump available

Buyer pays for shipping.

Email or PM for more details.

I will sell the pump itself for $60 shipped.

I need some D1 24 spline axles front and back from wms to wms. Preferably near Moab,UT.

Also interior door panels for 89 RRC. Black or Grey.

Thanks, Matt.

Well I am moving from NC to MN and have 7 vehicles, so the Disco project I was going to build for my wife has to go. It is a 95 disco, 3.9, runs and drives. Needs a battery and alternator right now. It has dents, scratches, etc. It is a wheeling truck. Head liner is pulled out, rear jump seats are out as well as the rear A/C.

Change in plans, I put it over at my neighbors, he is going to part it out......

z287899@gmail.com
Send me an e-mail if you want his number.

Nick

Looking to completing my build of a 1975 2 door RRC >

I am still looking for some bits..

2 black handles , the nut for the brake switch, actually I would need a nut from an 87 or 88 RRC since the new brake switch does not have the same thread as the older nut.

seat belts ( 2 sets for front with shoulder harness and 3 rear)
B pillar trims (grey , but any color will do)
An old roof liner
2 black external (vinyl coated upper panels on the C Pillar or rear pillar)


Thanks

./T

please contact me if you have one. lmascon@comcast.net needs to fit a 96 disco.

please contact me if you have one. lmascon@comcast.net needs to fit a 96 disco.
Call Will Tillery, roveryguy.com. he usually has more than a few.

Thanks for the link I just emailed him

parting a 92 RR classic. Bought this as a parts car and took what i needed. the rest is up for grabs. PM me what parts you need and your offer, and ill let you know if i have it.

i know im new here, just been lurkin for a bit. if you wanna do this through ebay i can always setup an auction. thanks

92, swb, white/brown, northern va

Pics, model year, swb or lwb, color combo, location???

Shop cleaning sale version 1.0

I have been asked to list some of my stuff and some of Gary's.

Let's start with Gary's.

1959 SII 88", $6200. 26K miles, thought to be original mileage.
Non-tropic top, rotted rubber around the glass.
Bulkhead in pretty good shape, one hole in right footwell where the back of the footwell meets the removable floor plate.
Frame heavily surface rusted, but appears to be intact and sturdy.
New brakes, fuel tank.
Generator converted to one wire alternator.

Nice driver, I drove it as my daily driver most of last summer.

1967 SIIA 109, six cylinder. Five-door. $2200
No engine/trans/t-case.
Axles probably junk.
Frame probably junk.
Good six cylinder (much deeper than the four cylinder model) bulkhead.
Tee-pieces in pretty good shape.
Right rear corner of tub wrinkled.
Tropic top-NO, we won't sell the top separately, don't ask, we've turned down a lot more than you have to offer).

If the offer is high enough, I will throw in a RRC rolling chassis for $200.

RRC chassis shortened to build a buggy, with 3.9/ZF/BW $500. It ran when we cut it apart.

1967 SIIA rolling chassis. Chassis is pretty rusted, the engine stuck, has trans and t-case. Make me an offer!

Two wrecked Disco body shells. One rolled, one burned. The burned one has both axle housings, the rolled one only has a rear axle housing. If nobody wants either one, they're gonna get cut up into pieces that don't look like trucks and scrapped.

I have got to get rid of some of this stuff so the county will leave me alone.

Pics on request via e-mail.

Everything located in Ottawa Ontario Canada. Will ship on your dime by UPS or Canada Post (USPS).

Pair of Scout II steering boxes, one has a pitman arm, the other does not, good shape - $100 each OBO.

Rover TF727 to LT230 parts - Everything I have. These parts are specific to the 727-LT230 factory adaptation - Rear 727 transmission housing, complete shifter assembly without handle, aluminum RR classic interior console/shifter support, transmission/T case mount, parking brake lever and assembly. Missing the trans output shaft, which is the same as a Quadratrac equipped 727 from a Jeep. Will try and post pics - $250 for all of it. Opens up a lot of possibilities.

101FC Sals ring and pinion - great shape, 5.57 gear, $150.

Tons of Eaton H072 stuff selling cheap to the Rover peeps - 5.14 gearsets X2, 4.57 gearset, H072 center chunk, axle shafts.

Eaton Ho72 hubs welded and redrilled for 5 on 6.5, rough, $100 pair with new bearings

Couple of LT230s in parts, good 1.4 ratio gears, ask.


PM is probably best.

Parting Out 2000 D2. Some parts are not in perfect condition, please email if you need details on anything. Below Is a complete parts list. The link contains pictures of everything. Please note list and pictures not in order. The axles and links for $1500 include the front and rear 1-ton axles, complete suspension link setup, steering links, and rear driveshaft. Chassis included for another $100.

All parts located in Chicago, IL. Please email me at Don@contractorsaccess.com if you are interested in anything, I can get back to you faster than PM. All prices are OBO, deals offered for multiple items.


http://s13.photobucket.com/albums/a290/TheDonJohnson/

Mechanical / Suspension / Steering
LT-230 Transfer Case $400.00
1-Ton Axle Kit w/ Links $1,500.00
Alternator $100.00
Expansion Tank $20.00
Fan Clutch $40.00
Fan $20.00
Radiator $120.00
Fuse Box $20.00
PS Tank $15.00
Brake Booster $50.00
Master Cylinder $50.00
ABS Modulator $250.00
PS Pump $75.00
Steering Column $75.00
Ignition $75.00
Steering Box $100.00
Steering Shaft $20.00
Motor - Block $400.00
D2 Axle Housing - Front $100.00
D2 Axle Housing - Rear $100.00
Front Control Arms $30.00
Front Sway Bar Links $5.00
Transmission $400.00
PF Window Regulator $40.00
Anti-Rock Front Swayabar $150.00
Fuel Pump $60.00
Fuel Tank $40.00
Fuel Cap $10.00
Belt Tensioner Pulley $30.00
Neutral Pulley $15.00
6 month old belt $5.00
Oil Cooler $20.00
Trans Oil Cooler $20.00

Heating / AC
AC Condensor w/ Fan $150.00
AC Compressor $75.00
AC Evaporator $40.00
HVAC Control $100.00
Blower Motor $75.00
Heater Core $50.00
AC Compressor $150.00

Interior
Front Seats $200.00
Rear Seats $150.00
Center Dash Insert $45.00
Steering Wheel $50.00
Steering Column Trim $10.00
Headliner $20.00
PS Kick Panel Trim $20.00
Upper B Pillar - R $10.00
Upper B Pillar - L $10.00
Owners Manual $10.00
Dash Rubber Trim $10.00
Rear Door Handle Trim $5.00
T-Case Shifter Leather $10.00
Window Switch Trim Plate $20.00
Window Switch Panel $20.00
Trans Shifter Trim $40.00
Drivers Side Kick Panel $20.00
Overhead Console $20.00
Front Door Panels $30.00
Rear Door Panels $30.00
Seatbelts $15.00
Ashtray $5.00
Coin Tray $10.00
Glove Box $15.00
Instrument Bezel Switch $5.00
PS A-Pillar - Broken $5.00
PS Under Dash Panel $10.00
Any Damaged Interior Trim $10.00
DS A-Pillar w/ Switches $10.00
Dash Cup Holders $20.00
Dome Light $10.00
Grab Handles $10.00
DS Visor $15.00
PS Visor $15.00
Center Console Bottom Trim $20.00
Center Console $40.00
Rear Hatch Grab Handle $10.00
Rear Upper Trim Panel $15.00
Drivers Knee Panel $20.00
Dashboard $50.00

Body / Exterior / Glass
Hatch Glass $100.00
Windsheild Washer Sprayers $15.00
Windsheild Wiper Arms $20.00
Rear Door Handle Trim $20.00
Mudflaps $15.00
DS Front Turn Signal $30.00
PS Rear Bumper Cap $15.00
DS Rear Bumper Cap $15.00
LED Trailer Lights $15.00
Under Headlight Trim $20.00
PS Side Turn Indicator $15.00
DS Side Turn Indicator $20.00
Exterior Door Handle - Any $15.00
Interior Door Handle - Any $15.00
Door Window Glass - Any $20.00
Sunroof Glass $30.00
Body Window Glass - Any $20.00
Body Shell $200.00
Side Mirror - PS $40.00
Side Mirror - DS (hole in case) $30.00
Rock Sliders $100.00
Windsheild $200.00

Electrical - Motors, Switches, ECUs
Clock $25.00
Steering Column Controls $50.00
SLABS ECU $50.00
PR Window Reg $40.00
PR Window Motor $40.00
DR Window Reg $40.00
DR Window Motor $40.00
DF Window Reg $40.00
Rear Windsheild Wiper Motor $40.00
Front Wiper Motor $40.00
PF Door Lock Actuator $50.00
DF Door Lock Actuator $50.00
Polk Amp $20.00
Instrument Cluster $20.00
Security Module $20.00
Seat Switch - DS $20.00
Seat Switch - PS $20.00
Window Switches 5 @ $5 $25.00
Dimmer Switch $10.00
Sunroof Motor $50.00
Dash Switch Block $20.00
3rd Brakelight $15.00
ABS Module $150.00
PS Rear Door Lock w/ Trim $15.00
DS Rear Door Lock w/ Trim $15.00
Mirror Switch $15.00
Rear Sunroof Motor $50.00
EFI ECU $50.00
PF Window Motor $40.00

Here are a set of 4 wheels and tires off of my 98 Discovery series 1. Tires are Goodyear 235/70r16 and have about 3/4 tread left on them.. Wheels are in good shape with minor marks and scracthes on them... Center caps are included. Email me if you are interested and I will send photos.... Thank you... discorover1@att.net.

Need Locker for 96 Disco. Selectable preferred. With 4.10 gears would be great. New is a little out of my price range at the moment.

I have a really nice set of ARB locked 4.75 gears complete thirds ready to go. Also throwing in the compressor and solenoids plus my bag of extras. orings,switches,solenoid ect...$2300 for everything. also have a set GBR extreme axles $750 with the hd flanges or will sell entire package for $2750
http://sterlingrovers.com/gallery/albums/RENAME/lockers_003.sized.jpg
http://sterlingrovers.com/gallery/albums/RENAME/lockers_001.sized.jpg

3" Custom Suspension Lift w/EAS over ride
OME Springs
HD Bilstien Shocks
GBR Prop shaft
RTE 5" stainless extended brakelines so there is plenty to spare
Nearly New 255/85/R16 BFG Mud Terrains on black steel rims Trimmed to Fit with no rub (tested every angle with fork lift)
Newly rebuilt transmission and transfer case
Many more off-road accessories


Everything works except the sunroof which I have unplugged
Needs new o-ring and blender motor which I have but never installed(got new project vehicle)
Needs a valve job which I will do before sale
Many extra parts just in case, ecu's, trany-slector, etc, I bought a bunch of stuff from a stripped rover and can't remember what all I have. Trunk is full

Great Off-road and on, you can pull off trail onto the road and let go of the wheel and it stays straight as an arrow. With a set of true-tracs this vehicle would go anywhere. More new upgrades are available everyday and you can do alot more with it now than 5 years ago when I started looking for mods.
I have only put about 2500 miles on it since I bought it in 2003, prior to that it had never been off-road. All fluids changed once a year regardless of mileage

93,000k miles
Looking to get $6,500 but will make a deal depending on what comes with the vehicle

When people think of off-road rovers they don't usually think of the P38 but with the new products out there they are getting better everyday. Checkout rockrover.com for the complete review of the merrits of the p38 and some ideas for this one.

Email me for pics and a complete inventory of mods and spare parts.
benonthebeach01@hotmail.com

I just acquired another Range Rover and have a few things that can go. The truck is complete. Stock except for the transfer case. The previous owner pulled the engine and bought a 20,000 mile unit from Pikes Peak Rovers. He then proceeded to rebuild the engine and never assembled it. Therefore I have a 3.9L engine in pieced needing reassembly The parts for sale are as follows:

1. ARB Front bumper. SOLD
2. All body panels. White. No bad dents and never any accidents according
to carfax. Roof has haildamage.
3. The previous owner pulled the engine and bought a 20,000 mile unit from Pikes Peak Rovers. He then proceeded to rebuild the engine and never assembled it. Therefore I have a 3.9L engine in pieced needing reassembly.
MAKE OFFER $$
4. Interior parts. Seats are shabby. Carpets are dirty. Non county.
5. Tinted windows. All glass is good. Windshield and upper tailgate not for sale.

Those are all the big things I can think of. Headliner is good but not for sale. No a/c system PO removed it. Let me know what you need! I will post pictures asap.

Thank You,
Ian Koentges
303-419-5563
720-233-7208
www.lakeparkstorage.net
www.archetypemotorcars.com
www.friscofineartgallery.com

DII/P38a wheel spacers for sale. 4 spacers and all 20 lugs. bought them slightly used 3 months ago. i want what i paid: $250 shipped to your door anywhere in the lower 48http://i287.photobucket.com/albums/ll160/mds0010/DSC_0554-2.jpghttp://i287.photobucket.com/albums/ll160/mds0010/DSC_0552-1.jpg

Great shape and runs but not well. Has blown head gaskets. PM with your request. I am keeping the axles, t-case and trans with the drive lines.

OME Medium Duty Springs. 1" lift over stock.

$100

Located in Denver, CO 80211

99 Discovery SD

86K Original miles
Rovertym 5” Springs
Bilstein 7100 Series Shocks
DII Upper Shock Tower
Front Lower Shock Mount
Rear Shock Mounts
RTE Rear Spring Retainers
RTE Stainless Brake Lines
RTE A-Arm Extensions
RTE Front and Rear Spring Wedges
RTE Adjustable Panhard Rod w/bushing
RTE Rear Trailing Arms w/bushings
RTE Front Radius Arms w/bushings
RTE Caster corrected Swivel Balls
RTE Diff Guards Front & Rear
RTE Gas Tank Skid Plate
Home Made Rear bumber with 3.5 Ton Dixon-Bate jaws
Bilstein Steering Stabilizer
GBR HD DC Front Drive Shaft
GBR HD DC extended Rear Drive Shaft
Rovertracks HD Rear Axles
CV's Unlimited HD CV's
CV's Unlimited HD front Shafts
Ashcroft 4.10 ring and pinion
ARB lockers front & rear
ARB Non Airbag winch bull bar
ARB locker manifold w/ gauge
Trek Outfitters 15X10 Steel Wheels with protection Ring (5 Spares)
TrailReady Beadlocks w/ Aluminum wide Rings 15X10
Nitto Mudd Grapplers 35X14.50X15
Cobra 19-DX IV CB
Hella 500 Fog Lights
Flowmaster exhaust


Yes it has scratches but not a lot of dents. Never been rolled or submerged. The heated seats still work along with both sunroofs and all the windows. The rear cargo door does not lock but it does shut and latch. There is a small oil leak coming from the oil pan that my have one drop over night. Very fun truck. The suspension was completely set by Steve Turner in his shop. Tires have about 400-500 miles on them no lugs missing or sidewall tears. The truck is in great running condition and as long as you are running at least 38psi drives great on the road. All bearings replaced less than 200 miles ago. Diffs were just drained and replaced with Lucas oil. New air filter installed last week. The cruise control was disconnected only at the switch to make room for ARB switches. I'm sure it still works. It comes with a new spare on a 12X10 Trek Rim. All 5 extra rims comes with the truck incase you do not want to run the Beadlocks. The transfer case shifts very smoothly. Kieth from RoverTracks has assured me that the rear axles can not be broken with this set up. He guaranted it! Oh Ya and has a good inspection sticker..



YouTube - Land Rover Weekend at the Cove 2008 prt3 (http://www.youtube.com/watch?v=5_fpJCkEEDI)

Asking $8,500.00 or $7,000.00 with out diffs

Safari Gard Discovery 1 Rear Bumper $750, obo, in Salt Lake City, UT

**WILL NOT FIT D2**

I'ev been trying to sell this for a while and things always fall through. The bumper is 5 years old. I'm parting out my Discovery for a Series 109 project I have going. I have repainted the bumper after cleaning up some surface rust in a few location. I also welded up a few holes where I had mud flaps mounted. Skid plate and mounting hardware included.

Shipping on this is going to suck. Would love for somebody to bick this up! Willing to meet within reason of Salt Lake City, UT... possibly Denver as I may be headed that way. Shipping will be expensive. The weight of the bumper is 110 pounds plus the skid plate. Dimensions are: 72"x34"x12". Feel free to calculate shipping from Salt Lake City, 84124. I can drop it off wrapped in plastic or on a pallet.

Thanks for looking, feel free to ask any questions. Check www.safarigard.com (if the sire is not down)

Thanks, Kris

I have (2) 96 disco and a (1) 01 that are parts vehicles. pm if you want anything off them and I will give you a price.

Hi all--Have been watching the posts and looking out for a front bumper with fog lights for my 99 Disco II and haven't seen anything as of yet. So, I thought just thought I'd put it out there...maybe you know of someone needing to sell one or you may have forgotten to list it as it was hidden in your garage somewhere. Let me know! Patrick (schusteremail@yahoo.com)

Hi all--Have been watching the posts and looking out for a front bumper with fog lights for my 99 Disco II and haven't seen anything as of yet. So, I thought just thought I'd put it out there...maybe you know of someone needing to sell one or you may have forgotten to list it as it was hidden in your garage somewhere. Let me know! Patrick (schusteremail@yahoo.com)I know a place that has lots of D2 bumpers; all with fog light tabs. :grinpimp:

1987 D-90 Ex-MOD,LHD,Hardtop, NO RUST!(never even been rust proofed) registered in Quebec, 2.5 NA diesel. I have a Salisbury rear for it sitting in the yard and numerous spare parts. Has heated Acura seats and Sony sound system. Interior has been Gator Skinned. It has been converted to power steering, with new door seals all around. It has all the usual EX-MOD dents and dings. PM me with your Email and I will send lot of pics.

New price, $10,000 Canadian. Negotiable!

16 grand Canadian and its yours.So, is that like, $1.50 in real money? :flipoff2:

Kalix
Any chance you want to sell the spare set of rims? You have a good looking rig there. Actually it is damn near the same as my 96. I like the look of your fender flares alot better than mine. I went the cheap route and bought some junk pacers and riveted them on with aluminum angel iron. They were a fun project but look kind of half-ass.

DII SPARE REAR AXLES.

good shape. bought these a few months ago. don't really need them.

splines are straight and in good order. no twisting. came out of a street queen.

great for spares, especially if you're locked on stock axle shafts, run a trutrac, and/or are at the 33" tire mark.

asking $60 OBO plus shipping.


i'm going yota so i don't need spares.

Michael.

Up for sale, items located in North Bay, ON. CANADA.p1b8g5

1988 LT230 from RR. with shifter.and brake $200 (1.222)



Thought I would get around to this by now, my laziness is your gain!

$200
I can put on pallet and load, or tote whatever buyer wants...but buyer pays all shipping
JC
http://i789.photobucket.com/albums/yy171/corbeiljcta/IMG_1464.jpg
http://i789.photobucket.com/albums/yy171/corbeiljcta/IMG_1469.jpg

I'm selling my 3-link. It will be coming off the truck within the next couple weeks. It has been modified to accomodate castor corrected swivels up to 6deg, and the center link has been replaced with a Teraflex arm with a bush on one end and joint on the other. All bushings were replaced over the summer. I think I have some spare frame end bushes laying around as well. I'm looking in the $700 range.

Chad

I'm considering selling my 3-link. I'm trying to guage interest. It will be coming off the truck within the next couple weeks. It has been modified to accomodate castor corrected swivels up to 6deg, and the center link has been replaced with a Teraflex arm with a bush on one end and joint on the other. All bushings were replaced over the summer. I'm looking in the $700 range.

Chad

Pics of said 3 link?

:smokin:

Don't care if they are Emu, Bilstein, or that other kind Nitro Gaz or whatever they are called. Looking for used under $200, new under $300, or more for the higher end Bilsteins.

benonthebeach01@hotmail.com

I have a 2001 land rover disco for sale needs motor in akrasas has 100000 miles on the truck new tires body is in great shape 1500 I can e mail pic

I'm looking for a series IIA 88''. All I need is the body and frame so any non-ops would be perfect. PM me is you have one or know of anyone with one, thanks.

A great upgrade for a Disco or Rangie!3.55 gears, Drum brakes, Asking $800 OBO, Will trade for a set of Rover type ARBs ,truetracs,Or Detroits.

250 for the set of 4 plus shipping

Not a ton of tread, but they still have life! Lots of wheeling miles, no plugs or patches.. BROKE IN JUST RIGHT!

Thanks alot!

Lane

I have a manual transmission out of a 95 Disco. It has approximately 150K miles. Starting to need new syncros in 2nd and 3rd gears I elieve. I pulled the motor for a different truck, and need to get rid of the tranny before taking the rest of the truck to the scrap yard. I have no idea what these things are worth. If anyone could give me an idea on price, even if you aren't interested, I would be very appreciative.
Brian

p38 stuff:
Genuine winch mount with all hardware and cover, no winch $400
Genuine aluminum Steering guard with brackets and hardware $250
Genuine aluminum Axle skid guard (mounts to front radius arms) with all hardware and brackets $300
Genuine aluminum gas tank skid OBO (not sure if I want to let this go or not)
Genuine aluminum rear bolt on diff guard $250
P38 Genuine SD rack OBO (again, not sure if I want to let this go either)
4 Hurricanes with nearly new (less than 4k miles) 275/65/18 (33"s) Cooper Discoverer ATR's $800 (or make me an offer, ill trade plus $$ for bare/stock tire hurricanes or D2 natos)

Prices plus shipping from 76110.

http://www.flickr.com/photos/1950315...7623528791937/

Need cash, but will trade for certain things of course

Thanks!

Sold

Dana 60 Front, Sterling 10.5 Rear, cut to Rover Width and Offsets. $700

http://pirate4x4.com/forum/showthread.php?t=827807&highlight=

I'm looking to purchase a RRC.
Looking for anything lifted 3" +. Beyond that, any extras are a bonus. I've sold all my old toys, but want to get back into it without having to start from scratch again.
The closer to Philadelphia PA, the better. I have a truck/trailer to pick it up.
Condition does not really matter, though road going is ideal. If it was inspected in PA (even if expired) also a plus.
Anything out there?

hi chicago can you ship this axels to ca.

I am looking for a pair of old man emu rear medium springs. They are #764. The medium/heavy #781 would be cool also.

Pm me or email. Dealers are welcome if you have a good price.

thanks, Matt.
mlhoppen@gmail.com

D1 RTE gas-tank skid for sale.

Bought this from a buddy 6 months ago thinking I'd run it until I got around to building my own, now 6 months later it's been moved around the garage 75 times and that's about it. Brand new, never attempted to install it. $250, save yourself $50, and if you're local, another $40-50 in shipping. I'll be in Mammoth this weekend, so email of PM me and if I can't get to it before I leave, I'll respond when I get back.

http://i50.photobucket.com/albums/f306/maxyedor/Skid-plate.jpg

I just did sorry it took me a day to get to it.

BBC

I am ready to sale the axels that are under my truggy FRONT as ARB 475 gear set from GBR and heavy duty axels and cv from ROVERTRACK. REAR as aS ARB 475 gear set and axels from GBR $3000 FOR EVERYTHING i can be reach at 818 634 2258 or pm me alon. I am going to get d60 and 39

Clearing out garage, items from 99 Disco II:

>lightly used Atlantic British full safari rack - $600
>LR cross bars, lightly used $100
>18" stock tire, never used $25
>LR tire cover -never used - free with any of the above

Location - Annapolis MD

chris@chrisguthrie.com

Have pic's will email if requested.

This transmission is from a 2002 Land Rover Discovery with only 30,347 actual miles.

4HP-22 Automatic Transmission, Converter, wiring and ECM $700

scott@scottbowden.com or 770-315-8204
Located in Northeast Metro Atlanta, GA

Engine has been sold.

All parts are genuine Rover new in box prices include shipping and are negotiable.

part # application price incl shipping
amr6425 D2 Rr a/c switch $10.00
pch115370 d2 lwr hose rad to tstat $10.00
awr3784 p38 rr view mirror up to xa430701 $75.00
yrc100350 d2/p38 clock spring $100.00
xfb500262lpo lh tail light 06 up RR $75.00
prc6036 Def speedo cable $25.00
sbb103820k d2 throttle cable $10.00
mwc7756suc d1 lf door pckt bahama bge $25.00
ftc1381 rrc d1 def rr rotor $40.00
frc7329 rrc d1 def fr rotor $30.00
stc9191 d1 fr pads $30.00
fqj103170 def lh door latch $25.00
stc9189 d1 rr pads w/sensor $30.00
stc9188 d1 rr pads w/o sensor $30.00

Best to contact me by email fm.ducote@mediacombb.net

For Sale: Custom built Rockcrawler


Base Vehicle is 1990 Military Land Rover defender 90. It is registered in the state of California
A little history before the nuts and bolts. This was my dream truck. I have owned it since 2001. I have done much of the work myself but farmed out what I could not do. The current axles were put under it by Stinkyfab. I have personally replaced every single moving part in the entire truck. The rig is remarkably capable. As capable as any 4 seater I have seen. For the non rover, the engine is a 2.5 liter Direct Injection Turbo Diesel. It is incredibly reliable and very fun to drive. It averages 10mpg off-road. About 20 on road. This rig competed in KOH in 2009. It did very well until the battery came loose and ground out. Should I mention I have a new battery box?! Before the race everything was torn down, inspected, and replaced as needed.
The rig seats 4 adults comfortably. It has plenty of storage room in two compartments. There is some rock rash. I made the panels modular so that they can be replaced as needed. I can replace them if the buyer wants me to. I am asking $29,000. I am willing to entertain offers, but please do not lowball the offers. I do not have to sell this rig. In fact, I really don’t want to sell this rig. Please ask any questions at all!


Here are a few videos:
Backdoor after KOH 2009: YouTube - TDI Land Rover Defender 90 Land Cruiser FJ 40 at Backdoor (http://www.youtube.com/watch?v=paJHx435KTw)
Climbing out of FOL: YouTube - Hammers - Climbing Out - Full Of Love .mpg (http://www.youtube.com/watch?v=URFr6YrvC_c)
Details:

Front Axle: Spyder trax Spyder9 3.5in axle housing. Currie 9+ carrier. Currie 6.20 gears. ARB air locker CO2 tank operated. Chromalloy 35 spine inner axles. Longfield U-Joints Dedenbear inner C’s and outer knuckles. Ballistic fab hi-steer arms. Chromalloy 35 spline outers. 35 spline drive slugs.

Rear Axle: Spydertracks Spyder9 3in 3/8 wall housing. Currie 9+ carrier. Currie 6.20 gears. Spool. 35 spline outers full float hubs. Custom Rover outer with Disk Brakes.
Engine: 2.5L 300 TDI Diesel Engine. 150HP 260 lb torque. (Estimated)

Transmission: R380 Manual

Transfercase: LT230Q rebuilt by West coast rovers 1 year ago.

Cage: Designed by a TT cage builder. A little overkill. 1.75 DOM and Chromalloy.

Steering: PSC Everything. Go fast Orbital valve with the big 10AN fittings. 2.5in SE ram. Large Reservoir, Up rated pump. Extra pump comes with it.

Tires: 5 39.5x13.50x15 Irok Bias Plys (1 has tear) mounted to Ballistic fab Weldon beadlocks.

Measurements: 106 wheelbase. 23in to bottom of frame, 6'10" tall with full psi in tires. 4200 with fuel, gear, and a cooler full of beer. Cooler comes with (custom mount).

Misc: DJ safety racing 5 point belts, Mastercraft seats. Fox Coilovers. 14 up front, 16in the back. Custom made swaybar. Custom dash, custom, well, everything. Has winch but I want it. Mechanically perfect and very well maintained. I am sure I am forgetting a lot of detail. Please ask whatever I have forgotten. Thanks.
35K takes it and the custom toyhauler that tows it!! :)


http://i227.photobucket.com/albums/dd299/buckon35s/024.jpg

http://i227.photobucket.com/albums/dd299/buckon35s/126.jpg

http://i227.photobucket.com/albums/dd299/buckon35s/IMG_3487.jpg

http://i227.photobucket.com/albums/dd299/buckon35s/IMG_3486.jpg

http://i227.photobucket.com/albums/dd299/buckon35s/IMG_3488.jpg

http://i227.photobucket.com/albums/dd299/buckon35s/IMG_3479.jpg

FRONT rover track cv and hd axels 3 member GBR 4.75 with arb REAR 3 member GBR 4.75 with arb hd axel from GBR . i do have an extra set of hd axel from rover track will sale all for $2400 or rear for a $1100 and front for $1400 can part as well if needed. It as been well kept and maintain I am going d60 and 39 tires I do have as well 4 Allid beadlock 16x10 for $500 pm or call 818 634 2258

I have 4 Goodyear 235/85R16 MT/R's with kevlar on land rover steelies (no backspacing) You can have these rims cut and re-welded to gain backspacing if desired. I also have a 5th rim with no tire mounted.

The tires have less than 5k miles on them and are in good condition. There is plenty of tread left in these tires and THEY ROCK OFFROAD :buttrock: I am thinking about going to a bigger tire size and need offset rims while im at it.

I will sell everything together including 20 Steel Lugnuts for $1000 but I am flexible. I am located in SW VA, I can drive to meet anybody if necessary.

These pics are literally from yesterday haha. If you want me to get a pic with a penny in the tread I can but its still very good.

http://i309.photobucket.com/albums/kk386/williambrea/31149_394392435162_532120162_454161.jpg

http://i309.photobucket.com/albums/kk386/williambrea/31149_394392295162_532120162_454159.jpg

http://i309.photobucket.com/albums/kk386/williambrea/31149_394392395162_532120162_454160.jpg

Workshop manual from Land Rover for a DI 1995/1998 - Publication # LRL0079

I sold my disco and don't need.

nothing beats a paper copy compared to the CD

$45 shipped or best offer.

pm me

All sold.

Anyone see this one yet ?
http://www.pirate4x4.com/forum/showthread.php?t=902360

I also wonder if those TJ flares would fit on a Disco cause they don't look all that bad hmm.

Selling for someone else as a favor, it's listed on C-list for $1500- Pirates just need to bring a grand cash and drive away.

Faded red with leather interior. No major dents or missing chunks.

145K, runs excellent- transmission and transfer case shift properly including CDL. Body is straight, significant corrosion in all the usual places. Frame looks solid. Recent front brakes, comes with new rear rotors (not installed). Good rubber, A/C front and rear works but needs a recharge. Sunroofs work. Interior dirty, headliner sagging, muffler leaking, no spare. With some cleaning up, it would look decent.
Excellent trail rig donor or drivetrain donor for project. Available with used D90 chassis to make a D90 rolling chassis kit for $2000 (no title for D90 chassis)- the 90 chassis just needs rear crossmember replaced.
Daily driver until last week when owner bought a Disco II. Photos available. Located in Springfield VT. Title in hand. I wouldn't hesitate to hop in this thing and go anywhere- it runs extremely well.
PM for pics.

A set of 4 beedlock rims 16''x10 with 4'' back space some rock rush they seal very well. $500 plus shiping

I have a rear rovertrack HD axles will sale for $300

http://www.pirate4x4.com/forum/showthread.php?p=11716679

RRC stuff:
-Window glass with frames.
-Grey seats, not perfect but in surprisingly good shape.
-Grey inner door panels and a console hatch. All good shape.

Will hold for 1 week and then toss.

Located in Harpers Ferrry. 1 1996 Discovery. No block heads or T-Case. Everything else is there. Make offer on any parts you need.The whole truck has about 70,000 miles on it. The left front Fender is wounded and someone attempted some bad body work. Other than that it is all there. Let me know what you need. You can email me at LMascon@comcast.net or call 304 707 2203 Please do not call after 8:30 pm Eastern Standard time.

-Lester

4 wheel spacers 1.5'' 5 x6.5for sale $150 they hardly used.

I've got the full powertrain out of a 67' series IIA 109, including a fairey overdrive unit on the transfercase. Transfer case and transmission in excellent condition. The motor needs a new exhaust manifold and some refurbishing but is good other than that. Also have straight front and rear axles and propshafts, wheels, gas tank and steering components. I would be interested in trading parts for some defender seats if available. Approx. 50k original miles. Everything is located in Tucson, Az. Message me for more details. Thanks everyone.

I'm putting this out there to gauge any interest. I'm parting ways with my long time project Discovery rock crawler in order to put additional start-up capital into my fledgling business. If anyone knows someone with interest please pass it along. I refuse to post this on that Dweb site and deal with the moron parade.

This truck is not perfect, its sat for a while, but a great platform and just needs someone who has the time and money for it. I'm out of both.

Whats included:
112" Wheel base
4 Link suspension front and rear with QA1 1.25" Rod ends and 1.25" Currie Johnny Joints
16" Travel Sway away coilovers dual rate w/ tenders at all 4 corners. They were rebuilt, just need a Nitrogen charge
Dana 60 front axle w/ 4.10 new bearings/seals
Dana 70 rear axle w/ spare 4.10 ring gear set new bearings/ seals
20 gallon fuel cell, with pump and lots of hose and fittings
High angle Driveline billet steel adapter to adapt 1350 U-joints to LT230
1350 jointed rear driveshaft
+Lots of spares that I'm forgetting off the top of my head


$2350 CASH. FIRM.

Here is a set of built Diamond axle Toyota based axles. Set up for elocker diffs., but could run regular diffs. These are full floaters, rebuilt manual hubs, longfield birfs, cromo rear shafts. They have the correct rover diff offset to line up perfectly. Castor angle was set at 5 degrees with correct driveshaft angle at 2-3 inches of lift. 63" WMS to WMS. Comes with everything except diffs and brackets. Mount however you'd like. No high steer arms included as that's kind of a personal preference. You get:

-one front housing with inner shafts and longfields: 1200.00
-one rear housing with shafts: 1100.00
-knuckles, rotors, calipers, spindles, hubs, lockouts (or drive flanges) for front axle: 678.00
-spindles, rotors, calipers, hubs, drive flanges for rear: 608.00
-have one 4.30 diff w/10,000mi. for if you're interested: 600.00

3900.00 for everything plus shipping.

3400.00 for everything minus diff.

The only things that have to be sold together are the shafts and housings. If you don't want the extra toyota bits to save on shipping, you don't need to get them. If you only want the front or rear housing, that is doable too. You will get a discount for buying both together though.

can deliver a reasonable distance for .34 a mile from Williamsport PA.

I am selling my '89 RRC.

Features:
4.3 chevy (new not rebuilt) with 4000mi
SM465 tranny w/granny low (rebuilt) 2000mi
Dana 300 T-case (rebuilt) 2000mi
Tom Woods drive shafts
245/75-16 BFG's
Grill guard
Custom (redneck engineered) rack :shaking:
Bedliner interior
Custom Dash

Parts that go with, but are not on it:
Red/white rear springs
2 Fox shocks
24 spline axles
3.54 gears set
1.5" spring spacers

Currently running on gasoline with 31 gallon aluminum tank and quadrajet carb. Comes with a full propane setup. Propane carburetor, regulator, electronic fuel metering, 2-steel 10 gallon propane tanks, 1-aluminum 8 gallon propane tank, ect. The propane set up is amazing. Nothing is simpler or easier than using propane.

Lots of custom work. Great base for serious rock crawler. Just needs axles and a good roll cage and this would be a monster.

547640

Matt.
mlhoppen@gmail.com

Ugly blue color, S model, no sunroofs, black interior. 170K and the engine was allegedly rebuilt 50K ago. The heads were off, but I think they never did the bottom end- nobody knows for sure.
Engine has bottom end knock- main bearings are wicked bad I'm guessing. I didn't take it apart- it actually runs and drives now. Low oil pressure.
Body is very straight, underside has no rust. None, perfectly clean as in like new... really unusual.
Lots of new parts, MAF, O2 sensors etc-

New mains and rod bearings might bring it back to life as a driver, or use it for parts as it is 100% complete. clear title, both keys, no other known faults.
Located in Southern Vt, will help load it if shipping it somewhere.

$3200 obo

Also have a 27" steel deck dual axle trailer with winch I'll throw in for another $2200. Rampless design, sliding deck, electric brakes.

Will trade for ATV of equal or lesser value OR a big car or truck- Caprice, station wagon, Suburban/Tahoe etc etcetcetcetcetcetc.

2001 Holland and Holland Range Rover 4.6 #170
115,7xx on Chassis
at 99k miles the following was done:
Motor replaced with low mileage unit with about 40k on Motor. Resealed when installed, (HG ect...)
All cooling hoses, radiator and heater core,
EAS had new bags, valve block and drier, and I believe shocks.
Blend door motors were replaced.
Has Genuine dog guard, Genuine heavy carpet rubber backed floormats.
this summer i did pads as well as a Diehard group 31m (Odyssey re branded)
Exterior is in great shape, no major flaws and only a few minor. Has color matched door handles and a few other trim pieces which I never identified. Michelin Synchrone 4X4 tires with tons of life left. Interior is in excellent shape with no major flaws as well. I will argue that this is one of the nicest P38's left.

Known issues are there is an HVAC fault (blend door motor skipped a tooth, happens 1 in like 20 trips)and the passenger front heated seat needs the filament replaced (i have it but have not had time to do it) drivers side was already replaced.

Asking $15,900 With all of the issues taken care of. Buyer will have the option to take a P38 SD rack with purchase that needs some TLC. It has never been mounted to this truck. WILL disclose the known history of the vehicle to anyone seriously interested.
Will be re-listed when i have time to get it detailed and some better pictures of it taken.
http://www.rangerovers.net/modelspecs/2000.html#special scroll down to the HH edition. it is basically this with the newer NAV and a few other 2001 variances.

I bought an 87 classic off of my uncle that came with a ton of spare parts from another classic he was gutting for a project. Heres the list. prices are a starting point. I am flexible so make an offer if you need something. I just want it out of my garage. I have pictures of everything, so email me if you are interested and I'll send them to you.

transfer case - $500 obo
transfer case - $300 obo ( this one is slightly disassembled. I believe he told me he had started some kind of low gear conversion, but i dont know for sure)
transmission - $300 obo
engine block - $100 (just the block...nothing else)
hood - $200 - no dents, needs paint - clear coat is coming off
Rear Left fender - $50
Front right fender - $75

I may have other parts, but these are the main ones i need to get out of my way. please email me. i dont check PM's on here very often. btunstill at gmail.com

-Brian

I've got a set of 5 15"x10" w/ 4.00" BS steel wheels, made in the USA. This is for the 5 on 6.5 rover pattern.

http://www.d-90.com/forum/attachment.php?attachmentid=31408&d=1285208810

http://www.d-90.com/forum/attachment.php?attachmentid=31407&d=1285208810

Wheels have less than 500 miles on them, or that is my understanding rather. They are in excellent condition, damn near new really. Powdercoating is in good shape with only a few nicks at the lip from the tire machine.

$350

Prefer buyer to pickup, I don't feel like rounding up boxes for all of these, but if you make it worth my while, and agree to pay shipping I'll do it.


I have a set of ROW D90 SW sides w/ windows, and a smooth roof panel with alpine windows.

Everything is in decent shape, the roof has some dents and dings and such from handling. It also has a cutout for a CB antenna, and holes from either a light bar or some euro-spec type cage.

http://www.d-90.com/forum/attachment.php?attachmentid=31404&d=1285207663

http://www.d-90.com/forum/attachment.php?attachmentid=31403&d=1285207663

$700 OBRO for all of it and a portion of the proceeds go to the Bobeck for being a good dude.

Would prefer for the buyer to pick up, or I will be willing to meet within a reasonable distance for a little gas & food money.

Just got a ton of XZL's in the 7.50R16 flavor. Brand new take-off, zero wear. $600 for four, $700 for five plus shipping cost.

All are mounted on Wolf steel wheels...PM me for pricing info if you want the wheels as well.

http://img708.imageshack.us/img708/4601/xzlc.jpg

1987 D-90 Ex-MOD,LHD,Hardtop, NO RUST!(never even been rust proofed) registered in Quebec, 2.5 NA diesel. I have a Salisbury rear for it sitting in the yard and numerous spare parts. Has heated Acura seats and Sony sound system. Interior has been Gator Skinned. It has been converted to power steering, with new door seals all around. It has all the usual EX-MOD dents and dings. PM me with your Email and I will send lot of pics.

New price, $10,000 Canadian. Negotiable!

Gotta go by Christmas!

You do not have PM info on this site - interested in tires.
Please email or PM me
Dave
dbkase at gmail.com

Wolf style, HEAVY - Gulf Coast wheels, 6.5 x 5 (Disco I, Defender...)
South Central PA
email me at dbkase at gmail.com

I have Disco Parts all from a Black Disco 94-98
Ask I have what you need
PM Me and i get back to you on Pricing...
Large items would be hard to ship so looking for local people to purchase and pick up.

Thanks Im in So Cal...

I have the pinion angle corecting block from Rovertyme unused for sale as well as a Defender transfer case with the 1.47:1 high range. The T-case is partially disassembled and comes with another 1.2:1 LT231 together they are enough parts to assemble a complete case. In the end its the gears in the Defender case that is worth the money.

I also have a D-1 ECU and a coil pack that are used from a D1. The ECU is from a maual trans and gives a higher advance curve than one from an auto trans so if you put it into an auto trans you get a few more HP's on top.

A-Arm offset block: $100 shipped $80 if you pick up.

T-Cases $250 Local pick up only.

Coil Pack $75 shiped $55 you pcik up

ECU $100 shipped $80 you pick up

This is all located in Harpers Ferry WV but I work in Frederick MD and travel to DC a lot. So we could meet

If you are interested please email me at LMascon@comcast.net I do not check PM's frequently.

I have the pinion angle corecting block from Rovertyme unused for sale as well as a Defender transfer case with the 1.47:1 high range. The T-case is partially disassembled and comes with another 1.2:1 LT231 together they are enough parts to assemble a complete case. In the end its the gears in the Defender case that is worth the money.

I also have a D-1 ECU and a coil pack that are used from a D1. The ECU is from a maual trans and gives a higher advance curve than one from an auto trans so if you put it into an auto trans you get a few more HP's on top.

A-Arm offset block: $100 shipped $80 if you pick up.

T-Cases $250 Local pick up only.

Coil Pack $75 shiped $55 you pcik up

ECU $100 shipped $80 you pick up

This is all located in Harpers Ferry WV but I work in Frederick MD and travel to DC a lot. So we could meet

If you are interested please email me at LMascon@comcast.net I do not check PM's frequently.

Too bad you're charging $20 to ship small items. :(

It not teally the shipping charge. Its packging it up and going to the UPS store. I am charging little enough for everything. If you want more than one thing then we could do something different.

It not teally the shipping charge. Its packging it up and going to the UPS store. I am charging little enough for everything. If you want more than one thing then we could do something different.

It's been my experience that private sellers don't usually charge "handling fees" unless the item is particularily large. Taking 5 minutes to throw something in a box is usually just part of the selling process. I personally wouldn't pay handling charges anymore than I'd pay someone to take a part off their truck when they're parting it out. But that's just me.

BTW, you can get free Flat Rate boxes delivered to your house from USPS. And you can print up postage from home and the mailman will pick it up from your house for free, so you can do the whole thing in your underwear. :D

c'mon fish, that's gotta be worth extra right there!

seriously, $20? I do the underwear thing too. but my coworkers think it's bogus. Pay online, print off a label and stick it on a box. Drop by the UPS store and done. Think of it as the price you pay to not have sit around looking at the useless junk that someone just paid good money for.

And you can print up postage from home and the mailman will pick it up from your house for free, so you can do the whole thing in your underwear. :D

4 stock rims that came off a 99 Range Rover - $300.00 OBO.
Located in Conroe, TX. If I'm too high make an offer, I want them gone.

http://i41.photobucket.com/albums/e297/JEFRO6903/a06ef212.jpg

Tore down my drive train the other day:

ZF...Approximately 80k on the clock. Very strong when pulled. Converter, flexplate, et.al. $400

LT230: Same miles with Maxi's EN hardened x-shaft installed (still open center diff): $300

Coated Headman headers...Small ding in one tube...Needs some clean-up: $100

Ancillaries on engine: ECM, alternator, etc... What ever you want...Will entertain offers.

Peace!

-D

I have 5 39.5x13.5x15 Iroks on 15x9 steel beadlocks. They are the Ballistic fab ones, made by me. They have excellent welds. None leak. I have 5. I am only looking to sell 4 and will include the fifth. There are 4 perfect wheels, 4 perfect tires, and the 5 th tire has a small hole in the sidewall and the 5th wheel is dented. They both still hold air.

I will separate if I absolutly have to, but don't want to so were trying this way first. $500 for everything. Tires all have .5 tread at the center, the lugs on the outside have more wear. Still work well though. All hardware is grade 8 and all of them will still fit a socket. A can of paint and the rings will be good to go.

LR parts for sale + full length roof rack RRC


95 D90 seat back cover and heat rest cover $35

Green and red plaid 95 D90 seat back cover and heat rest cover free

stock Michelin unused tire for RRC free

RRC plastic cargo slide in carpet protection $25

new factory RRC SWB rubber mats for rear only $25

95 D90 console with waterproof cover $40

rear chrome bumper for RRC with end caps $25

wilderness roof rack spare tire carrier for rack $20

range rover Wilderness full length roof rack $350

all prices are for pick up in Colorado springs

extra for shipping

Steering Box from a 1994 Range Rover. One of the few that doesn't piss fluid.

I have a *mostly* complete 3.9l V8 from a 1994 Range Rover classic. All it is missing is an alternator. Includes; manifolds, ac compressor, injectors, fuel rail, engine and plenum. The Rover it came from had just over 130k miles. Ran wonderfully. Can compression test if needed.

Call or email for more information.

303-419-5563

Located in Denver.

Asking $150 for the steering box, $500 for the engine. Buyer pays shipping

303-419-5563 or email ipk712@comcast.net

im doing a build on my d1 i have all these parts up for sale that im not using

a bottorf fab heavy duty 1 off front winch bumper - 200$

arb old man emu xtra heavy duty springs and shocks barely used -200$

front axle complete w\brakes just put it under the truck in december when i bent my old one -100$

rear axle complete w\brakes needs wheel bearings there loose - 100$
drive shafts -50$

transfer case with shifter - 100$

transmission had a hard time getting it into over drive maybe because of 36" tires?> not sure so only -50$

engine includes all sensors and manifolds, new hoses, fan clutch ,idler, alternator, a/c compressor, new motor mounts, new coil pack, power steering pump, belt is even on it just installed in december only had 67,486 got it from lkq have receipt paid 800 runs great -250$

engine harness uncut w/ ecu -100$

2 mass air sensors -50$ each

7 steel wheels - 25$ each

3 alum - 25$ each

fuel tank with pump -50$

radiator very good shape -50$

a/c condensor -20$

all suspention linkage- 50$

rear seats good shape -20$

complete dash still in the cut up body everything still installed and in good shape harness still installed maybe cut in some places with wiper motor and more i cut it off at the top off the windshild and everything forward still there - 100$


or i will take 1500$ cash for everything its all here everything it needs to run and drive if you have a body i can deliver with in a certain distance for a fee i live in PA 15834 pm me for more info

Looking for a 300 TDI. Used preferably. Looking either a solid rebuilder or one with lower miles.

I have 4 allied beadlock rims 16x10 bp 5x6.5 bc 4.25 in a good shape holding air with a few scratches $80 ea plus shipping.

i have 3 sets of stock 24 spline rear axle shafts, will fit d-90, D1 , RRC , convert your 10 spline to 24's :D
200.00 a set obo.

265/75/16 Kumho MT's 95% tread on 16x 6.5 Woolf Nato steel wheels
asking $850 , or i might take a trade for some 15" wheels or other rover parts make me a offer

I still have everything for sale!!!!
Rims tires
rear jump seats
bull bar
and so forth...
Off a black SE7 with Tan Leather interior.
Ask I have...

For sale 1994 RRC Brand new 4.6, New tires, 2" of lift, Every thing works, I work at a Land Rover service and this is the cleanest Classic I have ever seen. I let the pictures do the talking. If interested call, 858-344-4455. Ask for Ryan.

http://i1092.photobucket.com/albums/i413/JeepRover/4212011054.jpg

http://i1092.photobucket.com/albums/i413/JeepRover/4212011013.jpg

http://i1092.photobucket.com/albums/i413/JeepRover/4212011018.jpg

http://i1092.photobucket.com/albums/i413/JeepRover/4212011024.jpg

http://i1092.photobucket.com/albums/i413/JeepRover/4212011028.jpg

http://i1092.photobucket.com/albums/i413/JeepRover/4212011031.jpg

http://i1092.photobucket.com/albums/i413/JeepRover/4212011038.jpg

http://i1092.photobucket.com/albums/i413/JeepRover/4212011054.jpg

265/75/16 Kumho MT's 95% tread on 16x 6.5 Woolf Nato steel wheels
asking $850 , or i might take a trade for some 15" wheels or other rover parts make me a offer

Price adjusted $650 obo. still looking for 15" wheels for trades or other parts

Tan 98Se7 JumP Seats still for Sale
motor
trans
transfer
axles
and so forth...
LMK,

Safari Gard Swivel D-Rings with backing plates, $100 shipped, paypal only.

http://i13.photobucket.com/albums/a290/TheDonJohnson/dring.jpg

Are the wheels still available?

15" gives far more tire choices.
Very little use. No rock rash.
3.75"BS
$180

http://i257.photobucket.com/albums/hh234/Roxtarfab/For%20Sale/PICS2005.jpg

http://i257.photobucket.com/albums/hh234/Roxtarfab/For%20Sale/PICS2006.jpg

http://i257.photobucket.com/albums/hh234/Roxtarfab/For%20Sale/PICS2007.jpg

Looking for rrc 727TF 3 speed auto.

I have for sale: Rear diff with 4.37 ashcroft gears, detroit locker and ashcroft axle shafts with about 1000 miles, and Front diff with ashcroft 4.37 gears and trutrack still haven't installed it. $2200

Full Rovertym 5" suspension including: 4 Springs, spring spacers, Radious arms, rear Links, adjustable front shock towers, adjustable panhard bar, caster corrected swivel balls(never installed), front and rear shock mounts, bilstein 7100 for the rear and rancho 9000XL for the front. $2200

RRC SWB roof rack with 4 front spot light mounts, CB antenna mount, 4 jerry can mounting brackets, and 2 reverse/spot light brackets. $700

36"x12.5" Super Swamper Radials never used still wrapped from when i got them shipped. $1300

I don't want to separate the diffs, suspension, or tires. The items will ship out from south Florida, thanks.
__________________

I have for sale: Rear diff with 4.37 ashcroft gears, detroit locker and ashcroft axle shafts with about 1000 miles, and Front diff with ashcroft 4.37 gears and trutrack still haven't installed it. $2200

Full Rovertym 5" suspension including: 4 Springs, spring spacers, Radious arms, rear Links, adjustable front shock towers, adjustable panhard bar, caster corrected swivel balls(never installed), front and rear shock mounts, bilstein 7100 for the rear and rancho 9000XL for the front. $2200

RRC SWB roof rack with 4 front spot light mounts, CB antenna mount, 4 jerry can mounting brackets, and 2 reverse/spot light brackets. $700

36"x12.5" Super Swamper Radials never used still wrapped from when i got them shipped. $1300

I don't want to separate the diffs, suspension, or tires. The items will ship out from south Florida, thanks.
__________________

I'm interested in the SSR's, can you give me a call? Thanks, Denny 706.248.2758

I'm interested in the SSR's, can you give me a call? Thanks, Denny 706.248.2758
I'll give you a call in the morning

FS D90 SD safari rack for NAS cage with rear ladder assembly. Pics will prob come after im back from CO unless someone wants it from there and Ill meet or deliver. Was holding onto it for my future truck, but we will be moving at least 2 more times before then and im tired of dragging it around with me...

1000 or trade (for a rust free D1 or rrc SWB that runs good :) ).

I need to get rid of this. Traded some parts to get it for a guy, then he backed out. I have no use for it. $350.00 Shipping costs are prohibitive, but if you're close to Little Rock, Arkansas........

You could come to the Bluff City Land Rover Event in October and kill two birds so to speak. Wheel and pick up parts.

I have a complete running drivetrain from a 97 disco 1 including engine 4.0 v8, transmission, transfer case, axles front and rear, drive shafts, all engine accessories: alternator, ps pump ac compressor,ect still has the belt on it , engine, wiring harnesses, computer, sensors, 7 wheels, and so much more extra parts from the original motor: intake injectors ect, extra axle parts just way to many to list there is a 6'x8' shelf full of extra parts almost enough parts for 2 discos it will take a 1 Ton truck to haul all these parts out of here everything is here with extras of almost everything if you don't see it here text or email I'm sure I have it the first 400$ obo takes it all. i would like to just have someone take everything the engine is newer just had it installed before I rolled it. I have receipts motor has 38,295 miles on it 2,623 in my truck It had serious body damage but I drove it home nothing listed shows any sign of damage txt me at 814-386-3368 or email onelessissuebooking@gmail.com like i said i would prefer someone just came and took it all dont really wanna go thru the pain of splitting it all up its all located in 15834 in pa can deliver for a fee let me know

are they 5 inch springs or 3 inch springs with 2 inch spacers?They are the 3" spring that were on my disco and i added the 2" spacers, when i went to buy the 5" springs from RoverTym they had taken them out of production. Everything it still for sale, make me offers!!

I have a client who has an older RTE 5" setup, complete, with a free chopped up DI, 4.0, 230 cam, trans, transfer case. GBR driveshafts F/R, GBR rear half shafts. Modine radiator, electric fans, trimmed ARB bumper, summit seats, harnesses, on-board fire supression, Summit aluminium fuel tank and pump (plumbed by me:flipoff2:). Complete with broken windscreen:D.

$2000.

Any interest? 260-804-0458
pt@ptschram.com

a rather beat up roof panel from an ExMod ffr (the later non ribbed type) The sheet metal is denty, but the gutters and windshield contour are in excellent shape. $100 bucks and you come pick it up near Montreal,Quebec. 4 series 4.7 diffs, 3 in good shape, one is busted badly, $100 bucks for the lot of em. Pick up only.

I replaced;
Transfercase and transmission, catalytic converters, windscreen, I have done the rear window circuit repair, replaced the Speed sensor, brake rotors and calipers, replaced the cooling system reservoir with the AB aftermarket version, and upgraded the power steering reservoir with a high flow billet aluminum version, rebuilt the front swivel balls, and replaced the front carrier and axles.

It has;
Front and rear Fox 2.5 Coilovers with Eibach dual rate springs, spring sliders, and tender springs.
Poly Performance upper and lower coilover mounts custom fitted for the Rover, front and rear.
RTE rear A arm correction kit, with Custom Heat treated lower links including rebuildable (largest size) Currie Johnny Joints and Poly Performance mounts.
Front Safariguard Modified lower links one of which is hinged and Pinned.
It also has the RTE Modified PanHard rod, Custom Hardened Steering links with GM 1 Ton steering ball Joints
I just replaced the Steel braided Brake lines
It has Fox Hydraulic bump stops in the rear, and a set for the front not yet installed..
It has a Aftermarket muffler (can't remember make) with all new Exhaust pipe from the cat back
5 steel rims with modified backspacing
5 nearly brand new 35"X12.50"x15" BFG Mud Terrain KM2's
factory steel lug nuts
CB radio
Tmax Competition winch on a custom fabbed Mount with stinger and billet fairlead with synthetic line
Cheap front rubber floor mats and a weather tech rubber rear deep mat.
Shaved off the roof rails.
Steel tube rock sliders
Front and Rear Tom Woods DC Driveshafts as well.. Thats two Double Cardan joint driveshaft front and rear as well as the machined adapters.

I have disconnected the ABS and SRS. This Rover is huge, it smashes down the freeway at traffic speeds, it's a little slow up hills but stock ring and pinion gears are stronger than reduced as they have more material and I never got around to doing the change. I have wheeled this pretty much anywhere I wanted and it has only let me down once (see replaced trans and Tcase).. I just don't have the passion I once did about this rig and feel the need to move on. I am sure whoever gets it will curse it as much as I did and definately LOVE it even more.. It is tons of fun to drive and turns allot of heads..

I'll even throw in the Super deluxe extra long Hi-Lift Jack that is powder coated and all that Jazz along with any extra parts like the mounts for the limiting straps ETC......

It needs, (hence the price reduction) new headgakets, rig drives in current condition just fine and at normal speeds without overheating. It also needs new motor mounts and transmission mounts.

I had the rig checked out at the local Rover specialist in sparks and he estimates the cost of the repair at about 1,500.00..

Total value of the parts and BRAND NEW tires is well over the asking price and it would cost a fortune to outfit another Discovery (or any rig for that matter) to this extent..

Please feel free to call 916.five two four.4121 any time for more info..

I have a set of five Q78R16 TSL Super Swampers mounted on wolf rims.
4 of them have been on the vehicle and have 5/8" of tread left. The spare hasn't a single mile on it, still has all the nubs from the mold.
The Wolf rims have valve stem protection rings welded to them.

$800 for all five

Located in Co Springs

I have a set of axles off of a 1991 Toyota FJ80 (front and rear) complete, non Elocked, drum brake rear -87,000 miles. 800 takes the pair. will ship if you pay for shipping

I have a set of axles from a 1997 Lexus LX450 (FZJ80) complete hub to hub non Elocked disk brake rear full floater- 67,000 miles
850.00 takes the pair.

Located in St.louis Mo.

Disco owners know what a PITA it is to try to find a sport rack system (biking, kayaking, skiing, etc) that will work with the Disco roof.
Yakima makes the HiRise towers that add 3.5" to the 1A mounts but thats still too low for Discos.
I machined a set of 5" spacers out of aluminum to work with my 1A towers. I used them for a couple seasons on my wife's D2 and they worked excellent.
No use for them anymore so I dropped them on ebay:
http://www.ebay.com/itm/300595093782?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Anyway, if anyone wants them they can either bid or I'll take $65 from the Pirate crowd (cancelling the auction).

Warn M12000. Just cleaned and rebuilt. Housed in my modified ARB. Looking for something smaller.

$900

Thanks,
Jeremy

Doing some housekeeping:
I have an ARB solenoid, switch with rear or front switch covers, and some air line.
All brand new, never used. Kept it as a spare since these tend to go out.

http://i257.photobucket.com/albums/hh234/Roxtarfab/For%20Sale/ARB008.jpg

http://i257.photobucket.com/albums/hh234/Roxtarfab/For%20Sale/ARB002.jpg

$35

Dibs has been called with one in line.

I've got for Sale an SD Rack Replica for a RRC SWB with 4 spot light brackets up front, in the center an antenna mount, 4 jerry can holder, and in the rear 2 work/reverse lamp mounts -- $650 obo would prefer pick up or ship on your dime.

I've got a pair of Hella Rallye 4000 (h12560031) with wiring harness all brand new in box, i'll take $280 + shiping obo

I also have a rear DS to convert your rotoflex to conventional u-joint with flange, spacer and nut... $120 shipped


http://img638.imageshack.us/img638/4163/dscn1860k.th.jpg (http://img638.imageshack.us/i/dscn1860k.jpg/)http://img17.imageshack.us/img17/485/dscn1861xo.th.jpg (http://img17.imageshack.us/i/dscn1861xo.jpg/)
http://img690.imageshack.us/img690/6015/dscn1862b.th.jpg (http://img690.imageshack.us/i/dscn1862b.jpg/)http://img851.imageshack.us/img851/3047/dscn1863h.th.jpg (http://img851.imageshack.us/i/dscn1863h.jpg/)http://img813.imageshack.us/img813/9311/dscn1864z.th.jpg (http://img813.imageshack.us/i/dscn1864z.jpg/)http://img15.imageshack.us/img15/2843/dscn1865tj.th.jpg (http://img15.imageshack.us/i/dscn1865tj.jpg/)
http://img690.imageshack.us/img690/6763/dscn2344r.th.jpg (http://img690.imageshack.us/i/dscn2344r.jpg/)http://img27.imageshack.us/img27/8931/dscn2345u.th.jpg (http://img27.imageshack.us/i/dscn2345u.jpg/)
http://img706.imageshack.us/img706/1385/dscn2349p.th.jpg (http://img706.imageshack.us/i/dscn2349p.jpg/)

I need a radiator for a Disco1, Any one got one laying around? 858-357-1465

*D1 HD rear axle shafts
*2 Rovertym offset radius arms
*2 Rovertym trailing links
*front and rear stainless steel brake line extensions
*an adjustable panhard rod
*5 black 16x8 steel wheels with a 2" offset
*A custom made front bumper with a behind the grill, hideaway winch plate and recovery points and light mounts

i have a new set of qt services rear trailing arms for sale. these were installed and removed and never used. these run 340.00$ new i have them for 300.00$. these are some heavy duty dual cranked arms built for lifts upto 3 inches. email for pics.

I'm not very fluent in the facts about this setup, as it was on the truck when I bought it. What I do know is their crossbars in decent condition and at a cheap price. As you can see in the pictures, a chunk of one is out, but is still fairly strong (Gorilla Glue and new hardware). One of the stainless button covers is gone too, doesn't effect anything but looks, they mount excellent and are VERY EASY to mount.

I'm not sure on a price. $110 shipped? O.B.O. Please email or post here; alexclark315@gmail.com. Thanks. Also, if anyone knows more about these please let me know.

Email for pics

i have two sets of steel braided brake lines for sale. one is stock one is 2 inches over stock. these kits come with five lines each. they are for the rrc but i think they will work on disco or defender also. they are male on both ends so if you have female ends on your soft brake lines these won't work. email me pics. 70 dollars per set. these will usually cost around 35$ per line.

pics of the qt trailing arms and the brake lines.

Cheap stuff for sale. greatly prefer local (rhode island)

D1 front and rear axles, complete hub to hub. Rear no longer has the ball joint mount. 100 obo for the pair, im just tired of tripping over them.

4 Fairly tired 33" bfg all terrains on factory D1 alloys. 80 obo, i have no use for them.

i have a 1985 defender with the 4 cyl gas engine and lt77 trans. runs great starts right up ran good would do 70 right up until the wheel bearings went out on the left side os the front axle. it has rust like they all do. hard top no windows roll up doors. has those simex style mud tires that have 90 percent tread on them. this would ned to be trailered because of the axle. it will drive out of the garage but thats about it. price is 5500.00$ price is pretty firm. it comes with a clear texas title. i would be willing to trade for a disco or rrc that is valued around 5 grand so no beat and rusted crap. would prefer soft dash rrc or 5 speed disco. also might consider a galvanized frame and fire wall for a defender either 90 or 110. email me with offers.

read the rules numbnuts.

90 still for sale would be willing to trade for an rrc or disco. let me know what you have.

read the rules numbnuts.

I did, dipshit. He didn't respond to PM, either.

Time to sell my 98 D1, 50th anniversary edition, shit's fancy.

Front suspension, all custom radius arms, cromo heim joints, SAW 2.5" coil-overs, SAW hydro bumps, trussed axle with a full sewer cap. 4130 steering and panhard rod, all on chromo heims.

Rear suspension, RTE 3" springs, Fox 2.5" smooth-bodies, poly bumps, half sewer cap, RTE trailing arms.

Interior, full cage, tied into the frame, not mounted to the body like most, constructed entirely of .120 wall DOM. 3 suspension seats with Crow 5-point harnesses, fridge/cargo mount on the right side where a second rear seat would otherwise go. Rear storage area has a removable shelf that splits your stuff up nicely so you don't have to take everything out just to get a roll of TP.

Driveline, Tru-tracks with 4.11 gears, Maxi-drive front axles and CVs, Rovertracks rear axles, D2 front driveshaft, U-joint rear. Motor and tranny run strong, and shift smoothly.

Exterior, custom front winch bumper with a Superwinch ep9 along with syn line, reworked Safety Devices rack with chicken coop flooring, and 4 Hell rally 4ks converted to HID. Rover solutions sliders. 6 15" steel wheels and 5 33x12.5" BFG mud terrains with plenty of tread. No rear bumper at the moment, but I'll build a new one before the new owner takes delivery of the truck.

Dual batteries on a "boat switch", 000 battery cable throughout.

A little over 144k miles, and has never let me down, never been trailered and never been on a tow truck, ever.

I'm sure there's a bnch more that I forgot to mention.

It has seen some trails, and it shows, this is not the truck to buy because your wife wants something nice to pick the kids up from school in, it's the truck to buy because you want to hit miles of desert whoops and then go to the Hammers. It's taken me everywhere, and I'll say it again, it has never been towed home, ever.

Of coarse it has the usual 13 year old Rover leaks, but never needs a top-up between fluid changes. There are a few other minor issues, most of which I'll fix before the new owner gets ahold of it, and none are going to stop it from driving across country or taking you to the tip of Baja and back tomorrow.

Asking $10k (minus GPS and race radio, but with a healthy amount of spare parts) but willing to keep some of the parts that don't effect drivability and that I can either use on my next build or sell on their own to get the price down. I take credit cards and can help arrange shipping/delivery, and would be 100% confident to drive this thing across the country tomorrow if you want to fly in and drive it home.

This is essentially what she looks like, will either build a new bumper for it, or send it to a friend's shop to have a new rear bumper built for the new owner as it's currently missing


http://i50.photobucket.com/albums/f306/maxyedor/forsale068.jpg
http://i50.photobucket.com/albums/f306/maxyedor/forsale059.jpg
http://i50.photobucket.com/albums/f306/maxyedor/forsale062.jpg
http://i50.photobucket.com/albums/f306/maxyedor/forsale055.jpg
http://i50.photobucket.com/albums/f306/maxyedor/forsale056.jpg[IMG]http://i50.photobucket.com/albums/f306/maxyedor/forsale058.jpg

1987 Range Rover Classic. Fully functional as my daily driver right now. This has been a project over the past year or so and I just don't have the time or money to finish it. Great on and off road vehicle. Extremely capable vehicle.

Work I've done on it:

-New head gaskets/valve job ($1900)
-All new belts and hoses ($400)
-All new Tie rod ends ($200)
-New 2" HD lift springs and shocks
-New Gas tank ($250)
-All new fluids
-New front shock towers and rings ($90)
-New Alternator ($125)
-New Kelly Safari TSR Tires 235/85 R16's ($800) - Basically a 32" Tire
-New CD Player
-New plugs and wires

Extras I have:
-Paint for the body
-New Decals for hood and tailgate
-Spare Transfer Case(For a 95' Model I believe w/ 30k miles)
-Spare Transmission
-Spare Radiator
-Spare Starter
-Steel Safari style roof rack
-2 brush guards
-Spare oil/air/fuel filters
-New in the box poly bushing kit for the suspension
-A few spare body panels
-Spare Tire mount for hood

...there could be more that i just can't think of

Again, this is a solid, drive-able vehicle. I drive it to work every day. I hate to get rid of it, but i have to cut back on my toys.

email with questions btunstill at gmail.com

https://mail.google.com/mail/?ui=2&ik=2d9bdd4d93&view=att&th=134282a7f4999652&attid=0.1&disp=inline&realattid=f_gw0nrh4h0&zw
https://mail.google.com/mail/?ui=2&ik=2d9bdd4d93&view=att&th=134282a7f4999652&attid=0.2&disp=inline&realattid=f_gw0nrh4k1&zw
https://mail.google.com/mail/?ui=2&ik=2d9bdd4d93&view=att&th=134282a7f4999652&attid=0.4&disp=inline&realattid=f_gw0nrh4m3&zw
https://mail.google.com/mail/?ui=2&ik=2d9bdd4d93&view=att&th=134282a7f4999652&attid=0.17&disp=inline&realattid=f_gw0nrh4w16&zw
https://mail.google.com/mail/?ui=2&ik=2d9bdd4d93&view=att&th=134282a7f4999652&attid=0.16&disp=inline&realattid=f_gw0nrh4v15&zw
https://mail.google.com/mail/?ui=2&ik=2d9bdd4d93&view=att&th=134282a7f4999652&attid=0.12&disp=inline&realattid=f_gw0nrh4s11&zw
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc7/310721_2089189117814_1487804117_31763248_184329408 5_n.jpg
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/312934_2089194357945_1487804117_31763266_156093772 4_n.jpg

Range rover classics

ARB winch bumper in good condition. $450

wilderness roof rack full length with tire carrier $450

rear chrome bumper with end caps $50

beige cargo cover $20

complete 24 spline third member $50


all parts in Coloroad springs Colorado

sold

i have 4 axle shafts left over from my 95 disco. the two fronts and two rears. birfs seem like they are in good shape. axle shafts never saw much abuse offroad.

these are in tucson az, 85743

looking for $50 for all 4 or $20 each if i have to split. willing to ship, but i can't imagine that being a cheap option. i do have a fwd air terminal here so that could work.

email is best. i am not on pirate much these days. upsidedown72@gmail.com

I sold my 99' P38 and I have a few things left over.

1. Front and Rear axles, complete with brakes. These are low miles, around 70k. Have been gone through and ready to go. $900. Sold as Pair.

2. HVAC head unit, again ready to go. $125

3. 4 Hurricane wheels, fair condition. $200 for the set