Hey Shawn want to get ur set up.. I have a d60 from an 75+- ford. Please pm me for more info and my paypal payment Thank u for ur time

Hey got my kit today looks great I will post pics when installing it

Hey got my kit today looks great I will post pics when installing it

Thanks!

got mine in cant wait till i get back so i can install them, thanks

Looking for brackets to fit a Chevy Front Dana 60. Do you make them or do you have any plans in the near future to do so?

Looking for brackets to fit a Chevy Front Dana 60. Do you make them or do you have any plans in the near future to do so?

It is a project I am working on, but so far I have not been able to make a bracket that I am happy with the quality on.

Paypal sent. Got an '85 14 bolt needing an upgrade

Paypal sent. Got an '85 14 bolt needing an upgrade

Got it. Thanks!

If I can get Paypal to work with me. I set up a Paypal account years ago and I forgot. LOL... I am in need of a disc brake full kit for a rear D60 out of a Ford from llike 77.5-79 F250. Full float model. I would like no parking brake calipers and and a price on rubber brake hoses and braided stainless steel ones.

Thanks...

BTW I priced out everything whoring parts out all over the sun and I might be able to save a whopping 15 bucks minus the bolts and what not. You are doing us all a favor here offering this set up at a great price. This must be a labor of love for you.

If I can get Paypal to work with me. I set up a Paypal account years ago and I forgot. LOL... I am in need of a disc brake full kit for a rear D60 out of a Ford from llike 77.5-79 F250. Full float model. I would like no parking brake calipers and and a price on rubber brake hoses and braided stainless steel ones.

Thanks...

BTW I priced out everything whoring parts out all over the sun and I might be able to save a whopping 15 bucks minus the bolts and what not. You are doing us all a favor here offering this set up at a great price. This must be a labor of love for you.

$315 shipped with rubber lines or $335 shipped with steel lines or take off $15 if you don't need wheel seals.

price on kit for 14 bolt semi float please i have a paypal and know how to use it

:smokin:

how about a quote on a conversion kit for my 79 Ford D60FF. I would like to upgrade to the El Dorados and steel lines. Shipped to 30606

how about a quote on a conversion kit for my 79 Ford D60FF. I would like to upgrade to the El Dorados and steel lines. Shipped to 30606

basic kit is $315 shipped +200 for eldo caliper and $20 for stainless = $535

Just need the bottom half of you parts list:
rebuilt GM calipers with steel pistons
semi metallic brake pads
new inner hub seals
caliper pins
rubber flex hoses
banjo bolts with copper washers
anti-rattle clips

How much for that shipped to ?

Could I get a quote for this aswell. ZIP 73546

Could I get a quote for this aswell. ZIP 73546

Take off $45 without rotors and $40 without brackets. So that means $230 shipped

Thankee!

I see that this is an old thread but I have a question.

I see no mention of residual pressure valves or a master cylinder change being required for 4 wheel disc brakes for your kit.

Is the kit somehow different from factory braking where the drum/disc brake master cylinder supplies pressure to the rear brakes first to overcome the return springs?

edit:
I may be asking something already answered,I just noticed that while thinking of my question I had only read the first page,after posting I see I am now on page 11,lots more reading to do!

With my kit there is no need to change your factory mastercylinder. I'm not a super tech, so I can't explain why but I do drive a truck with this kit installed and it works really well. I have been told it is because the movement of the caliper by volume equals the movement of the shoes and wheel cylinder.

thankyou very much for the reply.
I am seriously considering your kit and will probably try and find a way to get it to Canada when funds permit.

I have another question,
Anyone in the rust belt using this system?

The factory rear discs are terrible for rusting and pulsating when the vehicle is not driven daily to dry them out.Especially in winter.

My truck is mainly for towing and sits much of the time and I would like to know how the rotors are standing up under those conditions.
I am glad to see you went with the good old reliable calipers that seldom if ever seize the sliders.

I haven't heard of that problem and mine isn't driven that much.

Thanx again for the reply.

Here in Ontario salt is used heavily diring winter road de-icing and wreaks havoc with all the metal that is exposed.

Even daily drivers need caliper maintenace and lube at least twice a year to prevent seizing with the crappy sliders now being used.

I like the looks of your setup a lot and the price too,I just wanted to hear about conditions similar to mine before I buy.
thanx again.

The factory rear discs are terrible for rusting and pulsating when the vehicle is not driven daily to dry them out.Especially in winter.


Never heard that before either... With the exception of the parking brake function, how would a rear disc setup react any differently under those conditions than a front disc setup?

Since the rear discs normally do only 30% or less braking they don't generate anywhere near as much heat as the front discs do to dry them out,that and the discs are made of very poor quality steel-they rust fast.

Do you have an option for cross drilled and slotted rotors?

quote me a complete kit for a 72 k20 with an eaton rear end.

Do you have an option for cross drilled and slotted rotors?

Not at this time. I really don't feel they are needed on the rear axle and I debate about putting them on the front for a vehicle that will get mud. The problem is small rocks can get in the holes and groove the pads and then the pads will groove the rotors.

quote me a complete kit for a 72 k20 with an eaton rear end.

$315 shippped for the basic kit. Add $20 for stainless hoses and $200 for ebrake calipers if you want them.

97 Ram D80 SRW.

Does this kit work, would I just need the 4" tube weld on brackets?

I just want the cross drilled and slotted for looks. I have them on the front and my truck is going to be for street and show. what are the rotors in your kit? i.e. year make and model. I think i will just get a kit from you minus the rotors and find some cross drilled and slotted to match the front. How much would the ebrake kit be without the rotors?

I just want the cross drilled and slotted for looks. I have them on the front and my truck is going to be for street and show. what are the rotors in your kit? i.e. year make and model. I think i will just get a kit from you minus the rotors and find some cross drilled and slotted to match the front. How much would the ebrake kit be without the rotors?

mid 80's 3/4 ton 4x4 front - Saves $40 without rotors

I am going to order a kit for the 72 k20 with a eaton rear end. I need the ebrake kit with stainless lines but minus the rotors. How do I order the kit and pay for it. Also I noticed in your picture the brake hoses look like they are front style hoses. Just curious how they connect to the factory rear hardlines that hooked to the wheel cylinders? I would like to order the kit today so if you could get back to me asap that would be great.

I am going to order a kit for the 72 k20 with a eaton rear end. I need the ebrake kit with stainless lines but minus the rotors. How do I order the kit and pay for it. Also I noticed in your picture the brake hoses look like they are front style hoses. Just curious how they connect to the factory rear hardlines that hooked to the wheel cylinders? I would like to order the kit today so if you could get back to me asap that would be great.

$315 + $200 + $20 - $40 = $495 by paypal.com to gubni at comcast.net

You can loop your existing steel line, but I reccomend to cut it shorter and reflare the end.

$315 + $200 + $20 - $40 = $495 by paypal.com to gubni at comcast.net

You can loop your existing steel line, but I reccomend to cut it shorter and reflare the end.

Ok thanks. I'm placing the order right now. thanks for the advice on the brake lines.

Ok thanks. I'm placing the order right now. thanks for the advice on the brake lines.

Got it - Thanks for the order!

your welcome.

Placing an order right now for kit for a 98 dodge Dana 60

Just wondering when you will be shipping my kit out? If you could send me a tracking number so I can make sure when it arrives it doesnt sit on my portch all day. just PM me if you will. Thanks

Just wondering when you will be shipping my kit out? If you could send me a tracking number so I can make sure when it arrives it doesnt sit on my portch all day. just PM me if you will. Thanks

Pm sent

I mailed out the money order on Monday. Do you have an approximate day I should receive the kit?

I mailed out the money order on Monday. Do you have an approximate day I should receive the kit?

You should get the kit Monday or Tuesday.

Thanks Shawn.

This is probably answered in your original info/post so I'll apologize in advance.

Anyway, do you have a kit for an '01 Dodge 1/2 ton / 9.25 rear axle? I know you stated that your kits could be made to work on almost anything, but, with my lack of knowledge regarding this I wasn't sure.

This is an understaement when I say "I'm not familar with all the specs regarding each axle,year,make, or model".

Thanks

This is probably answered in your original info/post so I'll apologize in advance.

Anyway, do you have a kit for an '01 Dodge 1/2 ton / 9.25 rear axle? I know you stated that your kits could be made to work on almost anything, but, with my lack of knowledge regarding this I wasn't sure.

This is an understaement when I say "I'm not familar with all the specs regarding each axle,year,make, or model".

Thanks

You truck has 5 lug nuts on each wheel. I do not offer a kit for 5 lug vehicles at this time.

You truck has 5 lug nuts on each wheel. I do not offer a kit for 5 lug vehicles at this time.

Thanks for the quick response. Is there a specific reason that you don't have a kit for 5 lug vehicles? Is it not marketable for some reason?

Thanks for the quick response. Is there a specific reason that you don't have a kit for 5 lug vehicles? Is it not marketable for some reason?

More people want 8 lug and I'm just a one man operation so got to focus on just a few kits.

More people want 8 lug and I'm just a one man operation so got to focus on just a few kits.

I understand, you gotta go with what works.

Thanks again Shawn! Brakes arrived today, everything is there, packaging was great and USPS hardly even dented the boxes. Another happy customer to add to your reputation!

Will the 60 kit work on a 14?

Will the 60 kit work on a 14?

The only difference is the bracket.

Ok I got the kit for a 60 and now I Might run a 14.. Or a 70 will kit work on a 70 or can we trade the brackets?

Ok I got the kit for a 60 and now I Might run a 14.. Or a 70 will kit work on a 70 or can we trade the brackets?

All of my kits use the same parts other than the bracket. When you make your final decision send me a PM and I'll try to help you out.

Thanks buddy

Thanks buddy

Glad to help

quote to 37912 (minus brackets) plus stainless brake lines?

quote to 37912 (minus brackets) plus stainless brake lines?

My price includes shipping. Take off $40 without brackets and add $20 for stainless gives a total of $295

I have a 1998 ff gm 14 bolt from a 3500 gmc single rear wheel truck with slide off drums. Can you tell me if the rotor is hub centered like my drum is and also how thick the rotor is where the hub bore is. My drum is 0.38".

Thanks

Tom

Thanks

Tom

I have a 1998 ff gm 14 bolt from a 3500 gmc single rear wheel truck with slide off drums. Can you tell me if the rotor is hub centered like my drum is and also how thick the rotor is where the hub bore is. My drum is 0.38".

Thanks

Tom

Thanks

Tom

PM sent

My rotors work with 1/2" and 9/16" studs.
Do you have a kit for the Corp. 14 Dually? weld on is ok.

Do you have a kit for the Corp. 14 Dually? weld on is ok.

I do have bolt on for the cab and chassis version. If it's a true dually sold with pickup bed then no. Also both of these kits do not clear 16" dually rims.

I do have bolt on for the cab and chassis version. If it's a true dually sold with pickup bed then no. Also both of these kits do not clear 16" dually rims.
My problem is I was given this Dually rearend so I don't know what it came off of or the year model. I don't have a problem going to 17" reams to clear the brakes. I'll probably run close to 40" tires on this build.

My problem is I was given this Dually rearend so I don't know what it came off of or the year model. I don't have a problem going to 17" reams to clear the brakes. I'll probably run close to 40" tires on this build.

15" rims clear unless you are running dually wheels. PM sent

Looking at the 6-lug 9.5" 14 bolt semi-float kit.

I'm assuming this is using 1/2 ton front rotors.
I've seen some kits where part of the pad is off the outter edge of the rotor, as if it the bracket is too long...which causes problems trying to fit 15" wheels.

My 1/2 ton front discs clear my wheels with about 5/16" clearance.
Will yours clear 15" alloy wheels?

Thanks!

Looking at the 6-lug 9.5" 14 bolt semi-float kit.

I'm assuming this is using 1/2 ton front rotors.
I've seen some kits where part of the pad is off the outter edge of the rotor, as if it the bracket is too long...which causes problems trying to fit 15" wheels.

My 1/2 ton front discs clear my wheels with about 5/16" clearance.
Will yours clear 15" alloy wheels?

Thanks!

The caliper doesn't hang off the edge of the rotor, but not sure if it will clear alloy wheels.

Since the world didn't end last night --- btt

Ordered a set from you through paypal today for a '94 chevy 14 bolt, 10.5" ff, 65.5" wms-wms, drums slide off when wheels are removed. Ordered it with the braided stainless lines upgrade. Thanks for answering all my questions through PM the other day, VERY helpful, I appreciate it, it's what made me buy from you. Hope to see the stuff before this coming weekend. Thanks!!

fixed the caliper now i see that the dully wheels don't work?? i guess i need a quote on a set of bolt on brakets the rotor needs to move back 1.75in going to try a 1.75 wheel spacer that will put the caliper braket 1/8" from thedully brake flang.

already sraped all the drum stuff

fixed the caliper now i see that the dully wheels don't work?? i guess i need a quote on a set of bolt on brakets the rotor needs to move back 1.75in going to try a 1.75 wheel spacer that will put the caliper braket 1/8" from thedully brake flang.

already sraped all the drum stuff

PM sent

Can you send me a PM with a price and paypal info for you. I have finally got my paypal account all set up. I need a set up for a Ford D60 full float rear non parking brake calipers and braided stainless steel lines.

Can you send me a PM with a price and paypal info for you. I have finally got my paypal account all set up. I need a set up for a Ford D60 full float rear non parking brake calipers and braided stainless steel lines.

Done

btt

hey man I left you a message. Call me on my cell at 972-762-0233 Thanks, JOSH

hey man I left you a message. Call me on my cell at 972-762-0233 Thanks, JOSH

Calling now...

Total cost for a '93 F350 2wd dually with e-brake please :D

Total cost for a '93 F350 2wd dually with e-brake please :D

Sorry, can't do a dually unless you convert to single rear wheel or put big rims on. PM me for details.

Thanks for all the help. For anyone wondering about this kit, it is complete and Shawn has been GREAT to deal with. I screwed up and ordered the wrong kit and Shawn has been working with me to figure out the best solution. Always quick responding to any email or PM that I've sent to him.

tw1st3d5 I have had the same result with dealing with shawn. Quick responce no matter what the issue is. With my dealings USPS destroyed the package sent to me but him and I are working through it. I reccomend is product even though what I/we are dealing with in my personal situation. You can't fault the seller for a shipping company that internal issues.

picking up a 60 tonight, 30 spl single wheel unknown at this point if it's dodge/chevy/ford. should be ordering your kit sometime later this month.

picking up a 60 tonight, 30 spl single wheel unknown at this point if it's dodge/chevy/ford. should be ordering your kit sometime later this month.

The BOM on the right axle tube near the spring perch is the easiest way to tell, but I can always send you a weld on kit.

btt

Still selling these

How much for a 2nd gen 14b setup with stainless hoses, eldorado calipers n e-brake shipped to 18078?

How much for a 2nd gen 14b setup with stainless hoses, eldorado calipers n e-brake shipped to 18078?

basic kit is $315

stainless is +$20

ebrake is +$200

shipping is included

total $535

btt

btt

btt

Sent caliber out to u to be swapped out for opposite side. Should arrive Wednesday. thanks Shawn.

How much for a kit for a 79 ford Dana 60, no brackets, stainless lines, and ebrakes? Shipped to 01085?

Thanks,
Mike

How much for a kit for a 79 ford Dana 60, no brackets, stainless lines, and ebrakes? Shipped to 01085?

Thanks,
Mike

Pm sent

I am ready to order but, I still can't find the DOM on the 60HD I have. It's mounted on a '92 Dodge Diesel. BUT It is NOT the original Dana 70 the truck came with. I bought it with the Dana 60 on the rear. I have looked for the DOM near the right spring pad and can not find anything. I believe it is an early Dodge account it has the 5/8-18 studs (just ran the 1" nut through the tap) and it is left hand threads on the left side and right hand threads on the right side. (typical early Dodge) I find the "60HD" inside a web on the left looking from the top. Any suggestions?

I am ready to order but, I still can't find the DOM on the 60HD I have. It's mounted on a '92 Dodge Diesel. BUT It is NOT the original Dana 70 the truck came with. I bought it with the Dana 60 on the rear. I have looked for the DOM near the right spring pad and can not find anything. I believe it is an early Dodge account it has the 5/8-18 studs (just ran the 1" nut through the tap) and it is left hand threads on the left side and right hand threads on the right side. (typical early Dodge) I find the "60HD" inside a web on the left looking from the top. Any suggestions?

Simple - weld on kit, but you will have to drill out the rotor holes for the 5/8 studs.

Simple - weld on kit, but you will have to drill out the rotor holes for the 5/8 studs.

Ok. I plan on converting the rear axles over to the 1/2-20 that the front axle has to keep them the same. IF I can find studs with shoulders big enough for the 5/8 holes. Is this feasable? Maybe convert the front to 5/8? Will I have trouble finding wheels for that big of studs & nuts? The bigger nuts do look kind of cool!

So we're talking $315-Kit, $200-e-brake, $20 stainless hoses = $535.00 delivered. Correct?

Paypal to: gubni@comcast.net correct?

i was wondering if you have any of these kits for the 14 bold still available for sale. im trying to go from a dually to a single wheel axle. i saw you mentions weld on kits. any help would be great

you can email me at mu_96_stang@yahoo.com

Ok. I plan on converting the rear axles over to the 1/2-20 that the front axle has to keep them the same. IF I can find studs with shoulders big enough for the 5/8 holes. Is this feasable? Maybe convert the front to 5/8? Will I have trouble finding wheels for that big of studs & nuts? The bigger nuts do look kind of cool!

So we're talking $315-Kit, $200-e-brake, $20 stainless hoses = $535.00 delivered. Correct?

Paypal to: gubni@comcast.net correct?

Pm sent

i was wondering if you have any of these kits for the 14 bold still available for sale. im trying to go from a dually to a single wheel axle. i saw you mentions weld on kits. any help would be great

you can email me at mu_96_stang@yahoo.com

email sent

Just got a line on a Dana 70 for the old dodge. It would be a direct original replacement for the replacement that was installed on the '92 Dodge Diesel. Will the kit I ordered for the Dana 60 work on the 70? You recomended the weld on kit for the older HD60 I have on the truck now.

Just got a line on a Dana 70 for the old dodge. It would be a direct original replacement for the replacement that was installed on the '92 Dodge Diesel. Will the kit I ordered for the Dana 60 work on the 70? You recomended the weld on kit for the older HD60 I have on the truck now.

Everything is the same except the bracket. The tube on the Dana 70 may be a bigger diameter.

Do your caddy calipers come with the lever and spring?

This will be my first disk brake conversion on a FF, 1 ton axle (done plenty on SF axles). What modification does one have to do to the stock cables to hook up to the lever?

Do your caddy calipers come with the lever and spring?

This will be my first disk brake conversion on a FF, 1 ton axle (done plenty on SF axles). What modification does one have to do to the stock cables to hook up to the lever?


Yes they do.

If your stock cable works now, then it should work with this conversion. The only problem is if you have too much lift and it's not long enough.

Thanks, Is paypal the easiest way to complete the transaction?

$515 for the kit includes the caddy calipers and shipping right? I will need the kit for a '79 F-250, D60, FF.

Thanks, Is paypal the easiest way to complete the transaction?

$515 for the kit includes the caddy calipers and shipping right? I will need the kit for a '79 F-250, D60, FF.

yes

For a 14b C&C, can you send the kit minus brackets and we can add brackets from another source? What would the price with the standard calipers be that way?

EDIT: I had old info from pg 1: Does your C&C brackets use spacers or is the bracket formed to fit without them?

For a 14b C&C, can you send the kit minus brackets and we can add brackets from another source? What would the price with the standard calipers be that way?

EDIT: I had old info from pg 1: Does your C&C brackets use spacers or is the bracket formed to fit without them?

Save $40 without brackets. I can send straight brackets that are weld on with no spacers or I can send bent ruffstuff brackets with no spacers.

btt

Thanks for all the orders.

I need an e-brake kit for a 14b c&c and I want the ruffstuff bent caliper brackets mentioned a couple of posts up. Still $515 shipped?

I need an e-brake kit for a 14b c&c and I want the ruffstuff bent caliper brackets mentioned a couple of posts up. Still $515 shipped?

Yep, that's the price. On ebrake calipers my partner does those and it takes him about a week to ship once the order is placed. Often it's quicker, but sometimes he takes his time on shipping.

Great product, fast shipping, friendly customer service, all without the hassle of tracking down each random part. Thank you.
:smokin:
http://i279.photobucket.com/albums/kk144/crawlin91/006-3.jpg
http://i279.photobucket.com/albums/kk144/crawlin91/001-4.jpg
http://i279.photobucket.com/albums/kk144/crawlin91/005-2.jpg

PM sent

pm sent.

Payment Sent!

Payment sent. Thanks

Payment sent. Thanks

Thanks!

I'm curious if this will work on a 87 3/4 ton where the drums slide off?

I'm curious if this will work on a 87 3/4 ton where the drums slide off?

Im not sure what kind of axle you have but I do offer kits for all 87 3/4 ton trucks.

Still have this sweet deal happening?

Still have this sweet deal happening?

Yep, just boxed one up.

Gubni,

How much for the kit minus the brackets?

Thanks,
Jimmy

Gubni,

How much for the kit minus the brackets?

Thanks,
Jimmy

Take off $40 without brackets so $275

Hi Gubni

How much for just for loaded caddy calipers, brake hardware and steel braided lines. To 77354

Thanks
George

Hi Gubni

How much for just for loaded caddy calipers, brake hardware and steel braided lines. To 77354

Thanks
George

PM sent

btt

Great Christmas gift for your lady. lol

PM sent and bump for the evening crowd.
-Dan.

I've got a 96 Burb FF with the slide off drums. Did I read in an earlier post that the rotor would need to go on the back side of the hub? The research I've done (lots of grey information here) says this is not safe as it was not machined true. Why can't the rotors mount to the front of the hub like the drums do now? Would this be possible with a weld on bracket? Head is spinning, I've been researching all night!

Thanks

I've got a 96 Burb FF with the slide off drums. Did I read in an earlier post that the rotor would need to go on the back side of the hub? Correct

The research I've done (lots of grey information here) says this is not safe Wrong. I have sold many of these kits with no problems.

as it was not machined true. Correct but you sre talking 1000's of an inch.

Why can't the rotors mount to the front of the hub like the drums do now? The hub is too big and the rotor won't clear.

Would this be possible with a weld on bracket? Yes you could use a weld on bracket with this axle.

Head is spinning, I've been researching all night! Hope I've helped some.

Can I get a price on the caddy calipers with arms and springs please, I need to pass inspection.

Can I get a price on the caddy calipers with arms and springs please, I need to pass inspection.

$295 shipped

going to pick up my SF 14 bolt saturday. will be in touch soon!! :smokin:

Hey Shawn i bought you bought your disk brake kit the other day and after i recieved it it suddenly dawned on me that i needed your calipers with the manual emergency brake. would it be possible if i could send you back the calipers i have and swap them out for the ones with the parking Break? Also just wondering how much more it would cost for them after i send the ohter set back?
Thanks Denny!

Hey Shawn i bought you bought your disk brake kit the other day and after i recieved it it suddenly dawned on me that i needed your calipers with the manual emergency brake. would it be possible if i could send you back the calipers i have and swap them out for the ones with the parking Break? Also just wondering how much more it would cost for them after i send the ohter set back?
Thanks Denny!

PM sent

I'm looking to get the 73-87 14 bolt kit with e-brake calipers shipped to 58703, how much would that set me back?

I'm looking to get the 73-87 14 bolt kit with e-brake calipers shipped to 58703, how much would that set me back?

Basic kit is $315. Ebrakes are $200. Shipping isincluded so total is $515 unless you want to upgrade to braided stainless hoses for $20 more.

btt

I've got a 96 Burb FF with the slide off drums. Did I read in an earlier post that the rotor would need to go on the back side of the hub? Correct

The research I've done (lots of grey information here) says this is not safe Wrong. I have sold many of these kits with no problems.

as it was not machined true. Correct but you sre talking 1000's of an inch.

Why can't the rotors mount to the front of the hub like the drums do now? The hub is too big and the rotor won't clear.

Would this be possible with a weld on bracket? Yes you could use a weld on bracket with this axle.

Head is spinning, I've been researching all night! Hope I've helped some.


Would it be possible to use a newer Dodge or Chevy slip on rotor? I realize the brackets would have to be located in a different place.

Any idea what shipping to Alaska 99567 would be on a FF 14 bolt KIT?

Would it be possible to use a newer Dodge or Chevy slip on rotor? I realize the brackets would have to be located in a different place.

Any idea what shipping to Alaska 99567 would be on a FF 14 bolt KIT?

Anything is possible but i dont offer that option currently. I ship priority mail as long as you don't need e-brake so no extra shipping.

Anything is possible but i dont offer that option currently. I ship priority mail as long as you don't need e-brake so no extra shipping.

Right on!
Thanks for the info.
If I can't find what I'm looking for....I'll be back :)

14bsf (6 lug) - 9.5" (this is the 4x4 rear, not shorter 2wd)

Would also like the calipers w/ebrakes and stainless steel lines - do you have longer ones for a 4" suspension lift?

Shipping to 07728

14bsf (6 lug) - 9.5" (this is the 4x4 rear, not shorter 2wd)

Would also like the calipers w/ebrakes and stainless steel lines - do you have longer ones for a 4" suspension lift?

Shipping to 07728

PM sent

Sent money through pay pal. Any word on what the wait time looks like? Thanks.

Sent money through pay pal. Any word on what the wait time looks like? Thanks.

Basic kits ship next day. Ebrake kits take about a week. If you sent money today I did not get it. PM me your name if you sent money today.

All orders shipped

Ive got a 79 Ford F-250 Rear dana 60. will these work with 15" wheels with 4" bs?

Ive got a 79 Ford F-250 Rear dana 60. will these work with 15" wheels with 4" bs?

4" is pretty extreme on backspacing. If they are steel rims it might work without grinding.

I will be order the 2nd gen 14 bolt kit soon.....
my question is you said the rotors go behind the hubs....So i press out the stock wheel studs and reuse them to mount the rotor behind the hub?

Thanks
-David

I will be order the 2nd gen 14 bolt kit soon.....
my question is you said the rotors go behind the hubs....So i press out the stock wheel studs and reuse them to mount the rotor behind the hub?

Thanks
-David

That's correct.

Is the Dana 70 kit bracket bolt on? I don't trust my welding on something as important as brakes

Is the Dana 70 kit bracket bolt on? I don't trust my welding on something as important as brakes

There are so many variations of the dana 70 that I only offer it in weld-on. You might want to have someone else weld it for you.

Going to order this kit soon from you for a 14b and upgrade braided lines.
Just want to post here so I don't lose this thread.
Erik

Going to order this kit soon from you for a 14b and upgrade braided lines.
Just want to post here so I don't lose this thread.
Erik

Thanks

Will your 14 bolt semi float kit fit a 97 k2500 suburban?

Will your 14 bolt semi float kit fit a 97 k2500 suburban?

Yes

I have a new client build project.

Its a 94 ford centurion (f350 with Bronco Back) with the diesel idi 7.3 and sterling rear end

Need a price for complete kit with Eldorado calipers and SS lines shipped to 30157

How Much and how long to get here.

Builder Pricing??

Thanks

Marc
Quantum Leap Designs
Dallas Ga 30157

I have a new client build project.

Its a 94 ford centurion (f350 with Bronco Back) with the diesel idi 7.3 and sterling rear end

Need a price for complete kit with Eldorado calipers and SS lines shipped to 30157

How Much and how long to get here.

Builder Pricing??

Thanks

Marc
Quantum Leap Designs
Dallas Ga 30157

Basic sterling kit $390 + $20 for stainless hoses + $200 for ebrake so $520 shipped.

What if any additional info do you require for the Dana 70 non e-brake conversion kit? Are you accepting credit cards yet? Should I P.M. or call you to proceed?

Regards,

Country

What if any additional info do you require for the Dana 70 non e-brake conversion kit? Are you accepting credit cards yet? Should I P.M. or call you to proceed?

Regards,

Country

The Dana 70 kit is a weld on kit for $290. I need to know the axle tube diameter near the current backing plate rounded to the nearest 1/4". It should be 3" to 3.5" although there are a few bigger or smaller.

Yes I take credit cards, but not by phone. I used paypal to process credit cards.

PM is best for me since I work another full time job, but I am available by phone if needed.

Will get back to you A.S.A.P.

Country

I am not sure how to get you the exact year and model but I bought a front and rear Dana 60 from a guy who said they came off a mid 70's Chevy would you be able to get me a kit for these. More so the rotors as they are rusted too much so to be turned. Please PM me.

Im interested in your kit with the cady calipers and Steele lines. But first I would like to pick your brain a little about why so many people down talk to calipers, referring to them being a "pain in the ass" to bleed and adjust the e-brake. If you could give me a call at your soonest convenience I would appreciate it as I would like to finish up the build up of my 14 bolt(shaved 2", trussed,pinion guarded, and locked with 4.88's) I'm in Cali so please try not to call before 7 my time. My number is (707)-292-6913 ask for walter. I'm 99.9 percent sure those guys are a bunch of cry babies and I'll be ordering your stuff as soon as we speak.

It was nice talking with you and thanks for the order.

Payment sent. Thanks

Payment sent. Thanks

Got it, will ship tonight.

Are your e-brake Eldorado calipers new or reburb? Does the e-brake cable need a bracket or does it attach directly to the caliper arm?
I have a 98 K2500 sub with a single rear wheel 14 bolt FF axle. I added 2" wide aluminum spacer between the drum and aluminum wheel. I replaced the OEM studs with ones from a dually to accommodate the spacer. Any problems with the dually studs?
Thx.

Are your e-brake Eldorado calipers new or reburb? Does the e-brake cable need a bracket or does it attach directly to the caliper arm?
I have a 98 K2500 sub with a single rear wheel 14 bolt FF axle. I added 2" wide aluminum spacer between the drum and aluminum wheel. I replaced the OEM studs with ones from a dually to accommodate the spacer. Any problems with the dually studs?
Thx.

In general they are out of cores so have started making new ones. There's no way to tell when I order them if they will be new or refurb. Most are new.

The bracket is included with my kit.

I don't think there will be any problems with dually studs. At most you might have to drill the hole in the rotor a little bigger for them, but if they fit the drum they "should" fit the rotor.

Is the e-brake bracket bolt-on or weld-on?

Is the e-brake bracket bolt-on or weld-on?

The bracket bolts on to the caliper.

8 lug 14bolt full floater disc brake brackets only for 1995 k2500 4x4 with slide off drums. Pics and specs of brackets please. Price shipped to 97386. Thanks

8 lug 14bolt full floater disc brake brackets only for 1995 k2500 4x4 with slide off drums. Pics and specs of brackets please. Price shipped to 97386. Thanks

Sorry I don't sell just brackets, but I can say all of my brackets are 3/8 steel and as for a pic, it's just a boring flat bracket like most of the others out there.

Thanks for all the recent orders.

btt

btt

GubNi
Did you get my P.M.?
Hope to order within the week.

GubNi
Did you get my P.M.?
Hope to order within the week.

I just checked and nothing recent.

Got it. Thanks!

please send tracking number when kit ships

please send tracking number when kit ships

Just sent you an email to the email you paid with paypal.

Hi gubni, have questions about some items in 73 chevy 14 bolt kit rear. I have a 73 gmc and want to do a drum to disc conversion on the rear. Your kit has the needed parts. I don't know the ring gear size, i can measure it. I don't know how you can tell if the axle is full floater. I removed 1 side of the axle, to take off the drum. Also do i need any parts from the drum setup. I am new at this. Thank you in advance.

Hi gubni, have questions about some items in 73 chevy 14 bolt kit rear. I have a 73 gmc and want to do a drum to disc conversion on the rear. Your kit has the needed parts. I don't know the ring gear size, i can measure it. I don't know how you can tell if the axle is full floater. I removed 1 side of the axle, to take off the drum. Also do i need any parts from the drum setup. I am new at this. Thank you in advance.

Pm sent

Thanks for all the orders.

just ordered a 73-87 14 bolt kit, now the nightmare of finding all the brake lines and fittings

just ordered a 73-87 14 bolt kit, now the nightmare of finding all the brake lines and fittings

My kit comes with hoses and banjo bolts, so just get some hard lines from your local parts store.

Most people have a spool of brake tubing, a flaring tool and a bender. I can't tell you how many times I've used it and how much money and time it's saved me. You really don't even need the bender, it just makes it look better.

How much for dually 14 bolt kit?

How much for dually 14 bolt kit?

Same price -$315 for basic kit or $335 if you want the braided stainless hoses.

You still selling the kits with Eldo calipers? Also, are they Eldo calipers completely ready to hook up to a park brake cable, and do you know how well they work? I've been finding mixed reviews but need a park brake for inspection as well as DD use with a manual.

Thanks.

You still selling the kits with Eldo calipers? Also, are they Eldo calipers completely ready to hook up to a park brake cable, and do you know how well they work? I've been finding mixed reviews but need a park brake for inspection as well as DD use with a manual.

Thanks.

Yes, I am still selling them.

Yes, they are ready to hook up with correct levers.

Yes, the eldo calipers work good.

btt

How much for a kit for a 1994 SRW Dodge RAM 2500 4WD with Dana 70 rear shipped to Miami FL 33172 business address?

How much for a kit for a 1994 SRW Dodge RAM 2500 4WD with Dana 70 rear shipped to Miami FL 33172 business address?

email sent

btt

I have a kit but I am wondering if you sell the braided hoses by themselves? Thanks!

-Dane

I have a kit but I am wondering if you sell the braided hoses by themselves? Thanks!

-Dane

Yep $60 shipped

[B][COLOR="Red"]
new GM rotors
rebuilt GM calipers with steel pistons
semi metallic brake pads
new inner hub seals
new caliper pins
rubber flex hoses
banjo bolts with copper washers
anti-rattle clips



79 Ford dana 60 rear axle




How much for just these things with steel braided lines? I already have brackets.

Shipped to 62225 (il) or 38017 (tn)
Sent via bike messenger.

How much for just these things with steel braided lines? I already have brackets.

Shipped to 62225 (il) or 38017 (tn)
Sent via bike messenger.

PM sent

Got mine and there good stuff. Great seller

Got mine and there good stuff. Great seller

Thanks!

Anybody can have great customer service when everything runs smoothly. But as with anything sooner or later a glitch occurs and then the true test of a vendor is made. Gubni has provided me with outstanding communication and customer service to address my issue. I will buy from him for my next project.

Thanks.

Will the kit for the 14 bolt semi float 6 lug work on a 2wd axle? How much for it with the stainless lines an no brake pads shipped to 19952?

Will the kit for the 14 bolt semi float 6 lug work on a 2wd axle? How much for it with the stainless lines an no brake pads shipped to 19952?

Yes it will. PM sent on details.

Hi,
i am in need of your conversion kit for a a 1986 14 bolt FF, but I am not real hip with the whole paypal thing. Is there another way to make this happen?

Hi,
i am in need of your conversion kit for a a 1986 14 bolt FF, but I am not real hip with the whole paypal thing. Is there another way to make this happen?

Pm sent

Hey I have a semi float from an 80's van and need a kit for it! It is a 6 lug and has a bracket to flange distance of 5" with 31" shafts. Do you still use DOM spacers for that distance, or is it a solid spacer?? Total cost with stainless hoses shipped to 14226 please!
Thanks,
Matty

Hey I have a semi float from an 80's van and need a kit for it! It is a 6 lug and has a bracket to flange distance of 5" with 31" shafts. Do you still use DOM spacers for that distance, or is it a solid spacer?? Total cost with stainless hoses shipped to 14226 please!
Thanks,
Matty

Most of my kits are bent brackets now.

To the best of my knowledge all semi float 14 bolt 6 lug axles are the same when it comes to brakes. That one does not need DOM spacers. My price includes shipping

semi float kit is $340 plus $20 for stainless for a total of $360

Just got in a big shipment of brackets so I'm ready to go!

I will be at Harlan Thursday to Monday, but I will try to reply to any questions as I can.

Just placed my order

I'll ship tonight. Thanks!

I'm back from Harlan, it was a great time.