|
SCOTTS_4X 01-06-2009, 07:11 PM does anyone have a stripped flat top upper laying around that they could meassure for me? I need to know how high the rail is above the center line of the bore. any help is greatly appreciated. thanks in advance. -Scott usmcdoc14 01-06-2009, 07:28 PM 1.355" ish :D SCOTTS_4X 01-08-2009, 04:20 PM thanks doc, working on a little add on gadget with a "buddy" stay tuned -Scott DIY4X 01-08-2009, 06:41 PM thanks doc, working on a little add on gadget with a "buddy" stay tuned -Scott There are a few different heights available from different manufacturers. Probably what doc's "ish" was. usmcdoc14 01-08-2009, 07:11 PM There are a few different heights available from different manufacturers. Probably what doc's "ish" was. no, my ish was measuring from the top ID of the barrel hole to the top of the rail, then the barrel hole divided by half and added to it. on 5 different "normal" flat top uppers :laughing: DIY4X 01-08-2009, 07:16 PM no, my ish was measuring from the top ID of the barrel hole to the top of the rail, then the barrel hole divided by half and added to it. on 5 different "normal" flat top uppers :laughing: I have one that is a high rise and another that is a mid rise which I believe is fairly standard. High rise of course to help clear larger objective optics. I seen one at a gun show that was frickin' enormous! Must have been a full 3/4" higher than "standard." | |