PIT BULL CHEVY S-10 ON ROCKS SBC
THIS IS A BEFORE PICTURE , NOW IT HAS COIL OVER SHOCKS , FOA'S , SWAY BAR ( FRONT ) NEW HEIMS ,FULL ROLL CAGE
http://i294.photobucket.com/albums/mm112/TRAINHORN69/MISC/_65091.jpg
HILL IN HOLE BITHLO (TRUCKS GONE WILD EVENT )
FEATURED IN MUD LIFE MAG
http://i294.photobucket.com/albums/mm112/TRAINHORN69/bithlo/BITHLO054.jpg
THE PUP :D
MY SAMMI
CHEVY 10 BOLT
SBC 358
39.5 SUPER SWAMPER BOGGERS
FUTURE - GOING 4 LINK IN 2009
http://i294.photobucket.com/albums/mm112/TRAINHORN69/bithlo/YYYYYYYY.png
OFF TO A MUD EVENT
http://i294.photobucket.com/albums/mm112/TRAINHORN69/bithlotirepull003.jpg

STAY TUNED I HAVE MORE TRUCKS TO SHOW YOU :bounce2:

PIT BULL CHEVY S-10 ON ROCKS SBC
THIS IS A BEFORE PICTURE , NOW IT HAS COIL OVER SHOCKS , FOA'S , SWAY BAR ( FRONT ) NEW HEIMS ,FULL ROLL CAGE
http://i294.photobucket.com/albums/mm112/TRAINHORN69/MISC/_65091.jpg
HILL IN HOLE BITHLO (TRUCKS GONE WILD EVENT )
FEATURED IN MUD LIFE MAG
http://i294.photobucket.com/albums/mm112/TRAINHORN69/bithlo/BITHLO054.jpg
THE PUP :D
MY SAMMI
CHEVY 10 BOLT
SBC 358
39.5 SUPER SWAMPER BOGGERS
FUTURE - GOING 4 LINK IN 2009
http://i294.photobucket.com/albums/mm112/TRAINHORN69/bithlo/YYYYYYYY.png
OFF TO A MUD EVENT
http://i294.photobucket.com/albums/mm112/TRAINHORN69/bithlotirepull003.jpg

STAY TUNED I HAVE MORE TRUCKS TO SHOW YOU :bounce2:

keep them coming:)

Very nice trucks Train Horn. Isn't there a picture of Pitbull in one of the Mud Life magazines? The one from the Hill N' Hole, I believe?

Anyway, very nice. Digging the Pup also!

PIT BULL CHEVY S-10 ON ROCKS SBC
THIS IS A BEFORE PICTURE , NOW IT HAS COIL OVER SHOCKS , FOA'S , SWAY BAR ( FRONT ) NEW HEIMS ,FULL ROLL CAGE
HILL IN HOLE BITHLO (TRUCKS GONE WILD EVENT )
FEATURED IN MUD LIFE MAG
THE PUP :D
MY SAMMI
CHEVY 10 BOLT
SBC 358
39.5 SUPER SWAMPER BOGGERS
FUTURE - GOING 4 LINK IN 2009
OFF TO A MUD EVENT
STAY TUNED I HAVE MORE TRUCKS TO SHOW YOU :bounce2:

Take the caps lock off you fucking Yardape

take the caps lock off you fucking yardape

fucking yardape?? What the hell is wrong with you people.

NEW PROJECT
HAVE A CHEVY LUV DRAG TRUCK THAT WE HAVE REPLACED WITH THIS :evil:
$TUCCO MONEY 2
http://i294.photobucket.com/albums/mm112/TRAINHORN69/STUCCOMONEY2003.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/STUCCOMONEY2004.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/STUCCOMONEY2001.jpg
I HAVE MORE PICTURES BUT I BROKE MY ANKLE SO IM ON MY LAP TOP
KINDA NOT EASY GETTING AROUND THESE DAYS ....ILL HAVE MORE OF MY OTHER TRUCKS IN A BIT

fucking yardape?? What the hell is wrong with you people.



You people?

Did I say anything about your pictures?

Nothing is worse than a post with screaming capital letters :shaking:

fucking yardape?? What the hell is wrong with you people.


DONT YOU NEED TO GO WASH YOUR ASSS OR SOMETING :grinpimp:

very nice trucks train horn. Isn't there a picture of pitbull in one of the mud life magazines? The one from the hill n' hole, i believe?

Anyway, very nice. Digging the pup also!


yes they are every issue :d
and pitbull is in truck gone wild 4 & 6

PUP engine pics :D.......

AND HURRY THE FAWK UP!!!

































:flipoff2:

DONT YOU NEED TO GO WASH YOUR ASSS OR SOMETING :grinpimp:



Dude seriously, is there something stuck on your shift key?


But other than that I wanna see a build up of your rig, look half wise if you know what I mean

here ya fawking go :flipoff2:
my sexy CFM 750
sbc 358
http://i294.photobucket.com/albums/mm112/TRAINHORN69/MISC/BITHLOPITBULLPUP074.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/BITHLOPITBULLPUP079.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/BITHLOMOTORMUDDIGRAS028.jpg

here ya fawking go :flipoff2:
my sexy CFM 750
sbc 358
http://i294.photobucket.com/albums/mm112/TRAINHORN69/MISC/BITHLOPITBULLPUP074.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/BITHLOPITBULLPUP079.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/BITHLOMOTORMUDDIGRAS028.jpg



Thank you dear that's much better



Did any one inform you of the TOGTFO rule?

I DONT FOLLOW RULES !!!!!!!

SPEAKING OF RULES .....IS THERE A CAP LOCK RULE :flipoff2:

Stucco Steve is in the HOUSE!!.....:D

He love's the foa's .....great service dealing with them

we will buy more for our future projects for sure !!!!!

WILL POST PHOTOS OF THOSE SOON !!

train kicks ass !!!!!!!!!!!!

hey btw we got better tires for the tugs sucks your down for awhile :(
had fun with stucco money riding last time !!!!!!!!!!!!!!!!! :bounce2:

Ya bummer .............kick assss XRM :evil:

I'll be down for awhile :(

but the PUP wont .......may have steve or SB drive it for me @ bithlo TGW event !!!

fucking yardape?? What the hell is wrong with you people.

Nothing. Looks like a cool mud truck but take the fawking caps lock off. Its really not that exciting.

not sure if we will make it there that 2 200 mile trips in one weekend.

and im getting old :D

Looking GREAT train
its me the Rockford514 lost my damn password HaHaHa

Thanks for posting the pics, Train Horn.

Scott

back to 1 again .............LOL

thanks alot ........im not ALOUD to use CAP locks or i get bitched at by GROWN MEN .................LOL
I dont know if i can take it much longer :bawling:

Thanks for posting the pics, Train Horn.

Scott


your welcome

more to come :D

back to 1 again .............LOL

hoeism ruined lmao

thanks alot ........im not ALOUD to use CAP locks or i get bitched at by GROWN MEN .................LOL
I dont know if i can take it much longer :bawling:

guess they dont understand women :shaking::flipoff2: go figure

lol rock u should have just did a . like on the the other site

NEW PROJECT
HAVE A CHEVY LUV DRAG TRUCK THAT WE HAVE REPLACED WITH THIS :evil:
$TUCCO MONEY 2


Looks like Stubblefield's old ride :)

Yes TEX you got that right :D

needs alot of things done to it , stucco steve is working on that now
and using his alky motor !!

Nice! I know that sucker was a real flyweight. Y'all will have lots of fun with it!!

mighty dog is in the house

what up /

looking good train

Mod, rocks, show or otherwise. Front lift blocks bring the HOMO.

That Lil Sammi looks like fun to bog!
Scott

Train Horn. Lose the caps, you aren't doing anything for your cause except looking like an inbred redneck and loosen up a bit fucks sake.


I like your Sammi, whats the specs on it? Motor specs, axles?(how the hell does it survive on a 10 bolt?), driveline? Did you do it yourself? It looks like a blast to drive.

Oh btw you and all of the new "Mud" women as well as the guys with better halfs are encouraged to participate in the following threads.....

http://www.pirate4x4.com/forum/showthread.php?t=254322

http://www.pirate4x4.com/forum/showthread.php?t=250885

Thank you. That is all. :flipoff2:

i have the motor spec sheet i can get later , when someone gets home
broken ankle so its not easy to get around .
its a sbc 358

but as for the 10 bolt , i have broken my fair share of axles , till i went with yukon and moser ........so far so good !!

gonna also be running a open front , that just came in yesterday
right now lockers front & rear , just bought the new front locker too ( it will be 4 sale ), but its not working i have little control of the truck .......we are hoping this will help being open front with that !! we shall find out

gonna be switching out to dana 60 front & dana 70 rear in the near future

also gonna 4 link it

Train Horn.
Oh btw you and all of the new "Mud" women as well as the guys with better halfs are encouraged to participate in the following threads.....

http://www.pirate4x4.com/forum/showthread.php?t=254322

http://www.pirate4x4.com/forum/showthread.php?t=250885

Thank you. That is all. :flipoff2:


i scond that motion

well since your not gonna see my boobs or my ass those r for my mans eyes only :laughing:

but heres some legs for ya

im all about trucks & HP
i just love my tires .........................:grinpimp:
:flipoff2:
http://i294.photobucket.com/albums/mm112/TRAINHORN69/MISC/JIMMSHOUSE059.jpg

http://youtube.com/watch?v=m2ZSHzHwWL0 416c.i. ford windsor np 435 trans dana 29 tc dana44 4:88 detroit locker chrome moly axles , 9" 4:88 detroit locker strange center section arizona driveline ultimate45 cv :D:D

yes we love mud !!!! train and pitbull are awesome people. yes she is good at breaking things :rasta:

http://i435.photobucket.com/albums/qq74/XRMPerformance/benifit%208%2008%20races/DSC01143-2.jpg

we r hoping taking the locker out of the front will help with some breakage ........... got my open front the other day , guys suppose to be here today to put it in .........muddi gra's will be the true test , also hoping to get more control of the truck !!!

mighty dog that was a fun day at Bithlo TGW event ..........i miss the seeing your bad azz jeep at races ........... you work to much .............lol

and the new project ................HELL YEAH

~ THE DOG POUND BITCHZZ ~ :evil:

we r hoping taking the locker out of the front will help with some breakage ........... got my open front the other day , guys suppose to be here today to put it in .........muddi gra's will be the true test , also hoping to get more control of the truck !!!

mighty dog that was a fun day at Bithlo TGW event ..........i miss the seeing your bad azz jeep at races ........... you work to much .............lol

and the new project ................HELL YEAH

~ THE DOG POUND BITCHZZ ~ :evil:


breakage - control - you LMAO :D

shoulda told me got plenty of opens how bad is yer locker???

my locker is fine ...only got like 2 runs on it !!!

but we r taking it out and gonna sell it , it cost us like $400.00 but i think steve will take $200.00 for it

we r hoping i will run straighter down the track now , plowing side ways is cutting back on my speed .........wich i need as much speed as i can get ........... lol

i need as much speed as i can get ........... lol


:shaking: :p:p:D

http://i449.photobucket.com/albums/qq214/beener82/Emoticons/thPopcornsoda.gif

Heres is 2 of our 4 mud trucks in action , and 1 of our few team mates
This is $tucco Money 1 ~ BUBBAS MUD RANCH~
http://www.youtube.com/watch?v=hr3uaSEb8b8
county line saloon
$tucco Money 1
http://www.youtube.com/watch?v=qmTjB_vCHto
Pitbull @ MUDFEST .......we r not balls out due to windshield wiper broken ( not safe )
http://www.youtube.com/watch?v=n3BY7zBlBAs
Team mate MIGHTY DOG .....willys jeep
http://www.youtube.com/watch?v=1gj4zeaxGYY

my locker is fine ...only got like 2 runs on it !!!

but we r taking it out and gonna sell it , it cost us like $400.00 but i think steve will take $200.00 for it

we r hoping i will run straighter down the track now , plowing side ways is cutting back on my speed .........wich i need as much speed as i can get ........... lol
Your gonna take a locker out? Hmmm I like that little pup on 39.5 it look sweet. But why dont you work on the steering and chassis and a little more motor to get the speed? What gears you running? I realize it is a short ride and that will make it a little hard to get strait, but to get up a locker?:confused:

running 538 gears
i will admit im not really happy with loosing my locker , if it doesnt make much difference im NOT gonna be happy , but the guys swear by it !!
we shall see , when my ankle is better & im able to hammmer down then i will no for sure ! stay tuned :)

im running abut 500hp right now , its pretty peepy

absolutely love the trucks !!!!!

THANK YOU !!

truck #4 1997 dodge ram 4x4 ( retired mud truck )
stock 360
513 gears
dana 44
full suspension lift
moser axles
warn winch 12,000
39.5 super swamper boggers

http://i294.photobucket.com/albums/mm112/TRAINHORN69/OURWIPS-31-1.jpg

running 538 gears
i will admit im not really happy with loosing my locker , if it doesnt make much difference im NOT gonna be happy , but the guys swear by it !!
we shall see , when my ankle is better & im able to hammmer down then i will no for sure ! stay tuned :)

im running abut 500hp right now , its pretty peepy
KEEP THE LOCKER! That thing is light so with 500hp it should be flying? BUT 538 on 39.5? Speed is about tire speed, take those out and run some 373 or 410? If you have the motor thats all it takes, as long as you have the tq and hp it works. I run 44 boggers with 456's and can hold 2nd at 6500. Although I am running a 700hp/700ftlbs 582. My truck also wieghs in at 7800 lbs! When you run that 538's you are running out of gear to fast.
I would bet you $100 if you have a good motor like you say that if you swapped some gears you would gain speed and in turn run a quicker time.
By the way those pits look short? How long are they?:confused:

thanks for you input !! we always like possitive input

makes sence ......but we are gonna stick with the 538 for now
if this doesnt work out the truck will be done totally different in the VERY near future !!
we will change the gears & 4 link it also

we run at a few tracks ........they range from 80ft to 250

one more thing ....its not as much gaining speed ...as it is not going straight
the truck has had a few near flips !!!!!!!!!

Some of your problems are right here. Work out the steering instead of the locker! I bet it steers real good one way and not the other right? Looks like the shittttttttty old chevy steering on it right? Of course having those blocks in there not doing any good either! And it is pretty short wheelbase too. Believe me instead of loosing the money on the locker? You said you paid $400 and would sell for $200. Just work out that steering and then find someone that thinks they need 538's and get you some 410's or 373's hell you can prolly find some of those for free! since everyone thinks they need real deep gear sets.:shaking:

Shit the phone rang and I forgot this pic!

BUT 538 on 39.5? Speed is about tire speed, take those out and run some 373 or 410? If you have the motor thats all it takes, as long as you have the tq and hp it works.

I disagree with this. The lower your gears are the less stress you have on the axle shafts (I would run even lower gears 6.17 or 6.37). To get wheel speed change the t-case gearing or tranny. If you can't afford a SCS or ProFab case, look at the 3 speed kit (that's if you running a toploader).
2-cents

Some of your problems are right here. Work out the steering instead of the locker! I bet it steers real good one way and not the other right? Looks like the shittttttttty old chevy steering on it right? Of course having those blocks in there not doing any good either! And it is pretty short wheelbase too. Believe me instead of loosing the money on the locker? You said you paid $400 and would sell for $200. Just work out that steering and then find someone that thinks they need 538's and get you some 410's or 373's hell you can prolly find some of those for free! since everyone thinks they need real deep gear sets.:shaking:

the blocks have been removed .....my old motor ( stock 350 ) i had headers coming out wheel wells and they rubbed my brand new 39.5's so that was a quick fix to get me to a event !! they r now gone !! and still hasnt made a lick of difference ...ahhhhh it piss's me off

thank you very much for the tips !!
also .........we run a 205 tranfer case and its 2-1 gear ratio
we get to second gear at 6300 rpms with the 538's
we took the locker out hoping to have less breakage & easier to steer
we run a spool in the rear so it will still be good , we may be able to hang 3rd without the locker now . its all a TEST & TUNE !!!!

if it breaks we already have a dana 60 for the front & a dana 70 for the rear !!

I disagree with this. The lower your gears are the less stress you have on the axle shafts (I would run even lower gears 6.17 or 6.37). To get wheel speed change the t-case gearing or tranny. If you can't afford a SCS or ProFab case, look at the 3 speed kit (that's if you running a toploader).
2-cents


thank you for the feed back !!!
money isnt a issue , its tryin to make due with what we have
we have 2 other more immportant trucks to sink money into .......lol
my truck is more of the play truck ........but now im gonna focus on consistancy races & break out class's to get more into the game !!
and represent for the girls !!

I'm also not a big fan of spools. Let me change that, cheep spools. Deflection is a major problem with these. I think Eaton had a deflection bolt that worked to fix this problem, but corp 14FF & 70's don't have this option. The detroit is great but I think Randy's or Driveline has a open carrier spider gear replacement that works better than any spool

thank you for the feed back !!!
money isnt a issue , its tryin to make due with what we have
we have 2 other more immportant trucks to sink money into .......lol
my truck is more of the play truck ........but now im gonna focus on consistancy races & break out class's to get more into the game !!
and represent for the girls !!

Yea, i get having having fun (it got me band from here a few times) but who likes working insted of playing? If money ain't the issue and consistancy is the goal.........buy a few parts and have a HELL of a time:)

Edit: Overdraft on Chucks

I'm also not a big fan of spools. Let me change that, cheep spools. Deflection is a major problem with these. I think Eaton had a deflection bolt that worked to fix this problem, but corp 14FF & 70's don't have this option. The detroit is great but I think Randy's or Driveline has a open carrier spider gear replacement that works better than any spool

we run a detroit in the dodge , it had a auburn but they sucked !!

the blocks have been removed .....my old motor ( stock 350 ) i had headers coming out wheel wells and they rubbed my brand new 39.5's so that was a quick fix to get me to a event !! they r now gone !! and still hasnt made a lick of difference ...ahhhhh it piss's me off

thank you very much for the tips !!
also .........we run a 205 tranfer case and its 2-1 gear ratio
we get to second gear at 6300 rpms with the 538's
we took the locker out hoping to have less breakage & easier to steer
we run a spool in the rear so it will still be good , we may be able to hang 3rd without the locker now . its all a TEST & TUNE !!!!

if it breaks we already have a dana 60 for the front & a dana 70 for the rear !!Glad the blocks are out! Got the only case worth a damn! I run a 205 also. Although for bogging some will run a 208 for a wieght savings? Of course you can hold 6300 you have 538' with 39.5's.
But that steering link pointing down to the ground is you handling problem, or lots of it. Work on that, maybe build some crossover with a hydro asst.? Keep up the good post!:smokin:

I disagree with this. The lower your gears are the less stress you have on the axle shafts (I would run even lower gears 6.17 or 6.37). To get wheel speed change the t-case gearing or tranny. If you can't afford a SCS or ProFab case, look at the 3 speed kit (that's if you running a toploader).
2-cents
So that is your choice? But the lower gear get a weaker pinion! Also you must use the common sense rule here. If you run a 538 or 617/637 as you say how fast will it run down the road?
45mph? Run a higher gear and you can go faster right? of course you can that is as long as you got motor to turn it. So if you can go faster then that means more tire speed right?:shaking: I will put my 44's with 456's and my 582 up against your combo all day!

So that is your choice? But the lower gear get a weaker pinion!
At 6.17 and lower the pinion is not an issue. That's why I suggested running a lower gear

Also you must use the common sense rule here. If you run a 538 or 617/637 as you say how fast will it run down the road?
45mph?
Common sense would be to remember that her truck is perpose built for mud, not running down the road at 45mph

I will put my 44's with 456's and my 582 up against your combo all day!

Ok, I'll webwheel first with my little alky inj. 463, th400 in 3rd & 31" tires:

tranny 1.1 x case 1.25 x axle 6.17 = 8.483
RPM 8,500 / final 8.483 = 1002.00
1002.00 x 95 tire dia = 95190in.
95190 x 60 min/hr = 5711400in.
5711400in / 12 in.per ft. = 475950ft
475950 / 5280 ft per mile = 90.14 mph

I disagree with this. The lower your gears are the less stress you have on the axle shafts (I would run even lower gears 6.17 or 6.37). To get wheel speed change the t-case gearing or tranny. If you can't afford a SCS or ProFab case, look at the 3 speed kit (that's if you running a toploader).
2-cents

The SCS & ProFab are illegal in some of our lower & mid-level classes. Just another thing to consider.

I disagree with this. The lower your gears are the less stress you have on the axle shafts (I would run even lower gears 6.17 or 6.37). To get wheel speed change the t-case gearing or tranny. If you can't afford a SCS or ProFab case, look at the 3 speed kit (that's if you running a toploader).
2-cents

Lower gears are not going to help your axle shafts, as they are after the reduction, it may help with drive line u-joints, t-case out puts, ect,

But even that is only theory, & theory that I think could be proven wrong in some cases, if you have the power get your wheel speed up, 39.5 boggers I would shoot for 4.88:1 or 5.13:1,

I was running 5.13:1 with 44" tires, but I had plenty of power to work with.

Lower gears are not going to help your axle shafts, as they are after the reduction, it may help with drive line u-joints, t-case out puts, ect,

You are 100% correct with this statement, I was wrong. I had it backward.


But even that is only theory, & theory that I think could be proven wrong in some cases, if you have the power get your wheel speed up, 39.5 boggers I would shoot for 4.88:1 or 5.13:1, I was running 5.13:1 with 44" tires, but I had plenty of power to work with.

This theory has been proven time and time again in truck pulling. There is something about the 5.13 to 5.88 ratio that causes driveline failure. Outputs, joints and mostly pinions with 5.88's, it don't matter if its up front or out back.
2-cents

mostly pinions with 5.88's, it don't matter if its up front or out back.
2-cents

The pinion is getting pretty small with a 5.88 gear, could be part of the problem,

When hooked to a sled, & getting a good bite to the track it don't matter if its, 4.10 or 5.88, in a sense you are stopping the tires & inputting the same load to the D-lines & D-line u-joints, even though the lower gears makes it easier to spin the tires, if they are hooked good & not spinning then everything would see the same X number of ft lb of torque that the engine is putting out,

Mud racing, ( & even drag racing the 1/4 mile) is similar but mostly at the starting line with the launch.

It is hard for me to wrap my mind around this, & even harder to explain it.

The 5.8++ pinion on the R/W 103 rears break, but when changeing to the 6.17 pinion on the 106 the problem (almost) goes away. The gears heads are very close, but the shanks are very different. I don't know the differance between pinion size for the Dana 60 or 70.
After spelling out finals, engine rpm and wheel speed, my skull can't wrap around my brain. :confused:

Trucks gone wild held a awsome event today at bithlo motor sports in bithlo fla

the first Tri truck challenge of 2009

23 awsome teams signed up , and a car crushing event

Our truck PITBULL , ( team mates ) CRAZY BITCH & WIPE OPEN

Placed 2nd for the 321 !!!!!!!

it was a great day ........im hoping to get some photos up soon , waiting for my photographer ..to chime in :D

some pictures of me & my truck this weekend :D
http://i663.photobucket.com/albums/uu357/muddycook/th_P1020061.jpg (http://s663.photobucket.com/albums/uu357/muddycook/?action=view&current=P1020061.jpg)
http://i663.photobucket.com/albums/uu357/muddycook/th_P1020071.jpg (http://s663.photobucket.com/albums/uu357/muddycook/?action=view&current=P1020071.jpg)
It was deep
http://i663.photobucket.com/albums/uu357/muddycook/th_P1020074.jpg (http://s663.photobucket.com/albums/uu357/muddycook/?action=view&current=P1020074.jpg)
some of my carnage
http://i663.photobucket.com/albums/uu357/muddycook/th_P1020078.jpg (http://s663.photobucket.com/albums/uu357/muddycook/?action=view&current=P1020078.jpg)

Trucks gone wild " Spank the monkey race " 2 monkeys on poles one at one end of track one at other end , spank and go
Pit bull running his SBC & his FOA's
http://i40.photobucket.com/albums/e239/diggin33/TruckWarsBithloVids/th_DSCN4290.jpg (http://s40.photobucket.com/albums/e239/diggin33/TruckWarsBithloVids/?action=view&current=DSCN4290.flv)
Team mate " The grouch " running his BBC
http://i40.photobucket.com/albums/e239/diggin33/TruckWarsBithloVids/th_DSCN4359.jpg (http://s40.photobucket.com/albums/e239/diggin33/TruckWarsBithloVids/?action=view&current=DSCN4359.flv)
Me " THE PUP " SBC ......wasnt running up to par & something electrical going on
http://i173.photobucket.com/albums/w64/lilswamper/th_SDC10578.jpg (http://s173.photobucket.com/albums/w64/lilswamper/?action=view&current=SDC10578.flv)

Trucks gone wild " Spank the monkey race "

:rolleyes::rolleyes::rolleyes:

What are the motor specs on stucco money?

i like the pup, but wtf is up with the tc crossmember? that shit looks like a blind retard fabbed it up.

i like the pup, but wtf is up with the tc crossmember? that shit looks like a blind retard fabbed it up.

JoeBlow :confused:













































:evil:

Ill get back to you bitch's when im sober , hows that :flipoff2:

thanks for the love :D

What are the motor specs on stucco money?

Stucco money is actually our drag truck ( 406 on alky ) 15.1 comp:D
picking it up this weekend , blew other one they can only take some much of a beating

The one in video is our PITBULL truck is a 373 15.1 comp ,15 degree heads
bow tie block & heads , wilson manifold ...........wilson ported the heads
oh and a small 950 holley :laughing:
Its out of a old joe gibbs craftsman truck series truck

have a nice day

We love MUD up here in the PNW also:smokin:..........
www.sthelensmudrun.com

Bet that was fun getting that truck out huh?

Bet that was fun getting that truck out huh?

Yer' seein' it!!! That's me gettin yanked:eek: 38" TSL/1/2 ton @ that time:barf:

Got our new motor in :D ..now the suck ass part " WIRING " ............YUCK
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Motornewtruck-5a036.jpg

I begged and begged and got my wish :D
he's letting me borrow his "jimmy dean" cuts on carbon fiber rim's for the next 2 race's ahead .
those are the best freaking tires we have purchased to date .
http://i294.photobucket.com/albums/mm112/TRAINHORN69/jimmydeans006.jpg

now those are noice... i bet you did more than begging...

:flipoff2:

hell yeah i worked his ass good for that deal :D they slung some mud that's for sure.
but I'm just BOILING the tires off and sinking to bottom , my pumpkin bottoms out and i'm plowing to a dead stop .............its pissing me off !

I need a change just not sure wich way to go yet .:confused:

I begged and begged and got my wish :D
he's letting me borrow his "jimmy dean" cuts on carbon fiber rim's for the next 2 race's ahead .
those are the best freaking tires we have purchased to date .
http://i294.photobucket.com/albums/mm112/TRAINHORN69/jimmydeans006.jpg
How do you cut Boggers like that?

I need a change just not sure wich way to go yet .:confused:

i know you don't want to but what about some tractor meats? get some 16.1's and run the piss out of it.

How do you cut Boggers like that?

A company does them. They call them Jimmy Dean Cut Boggers. And they are nuts ;)

i know you don't want to but what about some tractor meats? get some 16.1's and run the piss out of it.
I agree
have been considering tractor tires , like 42in tall . can my 10 bolt handle them or then should i just change my shit out to the dana60 front dana 70 rear or just do it and see what happens .............lol trying to avoid major shit right now , and also my 39.5's are like new , never hit pavement for more than a second just to get off the trailer , so gotta part with those to help with cost , i try and keep mine low budget .....but that isn't cutting it either .

Jimmy deans is a company based in new york 716-652-9218 they are a bit pricey but worth every cent , if you really wanna get some hook going on:D

that 10 bolt won't last for a second with 16.1's. the only reason it's lasting now is that you can spin the boggers and such, the 16.1's wil hook up and it'll pop that 10 bolt every time.

'i'm leaning towards these 11.2/24's ............but we have said 10bolt isn't gonna cut it !!!...........this will be after our mud drag truck is done , gonna start working on hooking me up , also getting rid of the leaf springs

To many options , open for ideas and suggestions

Thanks for your input :grinpimp:

Word is the old guy who cuts tires for Jimmy Dean Off-Road is sick of it & not planning to do it much longer. They come highly recommended, but if you can't get 'em to do your tires, try Scott Ohlrogge at www.racinginthedirt.com Some folks claim his cuts are even better than Dean's.

Word is the old guy who cuts tires for Jimmy Dean Off-Road is sick of it & not planning to do it much longer. They come highly recommended, but if you can't get 'em to do your tires, try Scott Ohlrogge at www.racinginthedirt.com Some folks claim his cuts are even better than Dean's.
When we got ours about 7 months ago or so, the guy was out sick ( we were told @ time ) so it took like 3 months to get em , Thanks for the tip, we no a few people wanting a set in the future when money isn't so tight.

I'll pass it on

Word is the old guy who cuts tires for Jimmy Dean Off-Road is sick of it & not planning to do it much longer. They come highly recommended, but if you can't get 'em to do your tires, try Scott Ohlrogge at www.racinginthedirt.com Some folks claim his cuts are even better than Dean's.

Out here, cut tires automatically put you in the open class; which is why I typically recommend saving your money and going straight to ags. Lets face it, any dot tire, even a bogger, can't touch an ag tire in the mud.

However, looking at the cut pattern of those, I can see how they'd grab even better than many ag patterns. Pretty damn pimp :smokin: Granted, I myself would stick with ag tires. I'd think the void in the front of the lug that creates that killer scoop would fill full of mud asap negating their advantage. They'd be sick in the sand, though.

'i'm leaning towards these 11.2/24's ............but we have said 10bolt isn't gonna cut it !!!...........this will be after our mud drag truck is done , gonna start working on hooking me up , also getting rid of the leaf springs

To many options , open for ideas and suggestions

Thanks for your input :grinpimp:


I say try it and see. There is a lot of guys down here running Horseshoe trucks with anywhere between 6 and 9 hundred horse power on IFS fronts. There is a guy running 38" tractor tires on a complete 78 Ford with a D44 front (stock shafts I think) in the super mod class. not sure on the HP but it is a BB Ford with a 8-71 and nitrous.

Out here, cut tires automatically put you in the open class; which is why I typically recommend saving your money and going straight to ags. Lets face it, any dot tire, even a bogger, can't touch an ag tire in the mud.




For a lighter, faster machine, a quality cut like this will kill an ag tire as you'll wind up going OVER the mud instead of through it. But, it takes a TON of power to make them work properly. We also typically have more than 1 class that allows cuts. Sometimes it's a nitrous "truck" class, then a nitrous "rail" class, then a scoop tire class that allows blowers, and even a separate class for tractor tires. Granted, it's rare to find all 4 of those classes at one event, but 2 or 3 out of 4 is typically the norm. Even where it's all combined into 1 class, the guys on Ag tires are duking out for fastest loser while the 2,400lb rails on cuts or paddles are going for the win.

For a lighter, faster machine, a quality cut like this will kill an ag tire as you'll wind up going OVER the mud instead of through it.

I can totally see that, with the lighter, high horse dedicated mud racers. Those suckers just skim the surface they move so quick. You guys are blessed out there with a much more active racing body/regulations. Out here the rules vary from track to track and they usually change year from year :shaking:

Picture's of team mate " The grouch " as requested :D
The future of this truck is gonna be amazing !!!
running a BBC now ......Stay tuned it's gonna be insane :eek:
new tire's & rims ...one of many sets
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Grouch005.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Grouch004.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Grouch003.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Grouch002.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Grouch006.jpg
If you need any more info or picture's ( you no who ) let me know

Fun Redneck games :D
YouTube - Pitbull's first team (http://www.youtube.com/watch?v=BSFprKYuyZs)
~ Girls can too ~
YouTube - All Girls Team (http://www.youtube.com/watch?v=TqxV9rAed04)

That is some bad ass stuff man!!!

Thank you , But im a girl :D
heres a ride in Pitbull
YouTube - PITBULL (http://www.youtube.com/watch?v=uLg1VcOuoC0)
Here is my husband and i doing the fire drill race ......What a rush to drive .
I ( Train horn ) does the take off , pitbull steve ( hubby ) makes turn we are the 3rd truck with the
Rebel Flag :)
Trucks Gone Wild Lakeland May 4th, 2008 Video by Mr. T - MySpace Video (http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=33700240)
http://i294.photobucket.com/albums/mm112/TRAINHORN69/LAKELANDTHESWITCH.jpg

thanks for the pics and all the help/info!!!!!! greatly appreciated.....awesome vids!!

View of our set up in front :D
http://i294.photobucket.com/albums/mm112/TRAINHORN69/pitbullbubbas.jpg

That looks sick man. :evil:

Went to Boggin in bunnell ( 28 miles from daytona fla )
Family owned land since 1949,super nice people
http://bogginbunnell.com/

Heading to bounty hole to line up and BOINK there goes my tie rod.
we new it wasnt looking good , but with all the trucks going its easy to forget,so i forgive my man for that mistake ( also got to drive his truck :D)
http://i294.photobucket.com/albums/mm112/TRAINHORN69/t-rod.jpg
Heres Pitbull breaking the bounty hole open , first in a few months to do it:D
What a rush to be in it !
Now that the bounty hole has been open,back to the drawing board filling it with more MUCK , it may look like water but its NOT :eek:
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Breakingbountyhole.jpg

I was driving up I-95 in Florida on sunday and saw your trucks on the trailer going South.


Nice looking rigs

I was driving up I-95 in Florida on sunday and saw your trucks on the trailer going South.


Nice looking rigs


Very cool......... that duramax is getting a work out :D ( pull truck )

hell ya! finaly this site gets a mud thread! :D
Heres my truck:
http://i88.photobucket.com/albums/k179/sboarder2011/kalseyspics221-1.jpg
http://i88.photobucket.com/albums/k179/sboarder2011/101_004922.jpg
http://i88.photobucket.com/albums/k179/sboarder2011/l_2e1499e08d77947826193033443cc61a.jpg
http://i88.photobucket.com/albums/k179/sboarder2011/P1010008.jpg
http://i88.photobucket.com/albums/k179/sboarder2011/l_77ef40d6e12246aaa14a6813a6770bff.jpg
http://i88.photobucket.com/albums/k179/sboarder2011/jump44.jpg



514 Stroker with Cobra Jet aluminum heads. 800hp, C6 trans with 5 clutch Cobra Jet setup, Profab 3.75-1 T Case, 2.5 ton GM Axles, w/ 6.17 Gears, 4linked with kings sittin on 54"boggers

hell ya! finaly this site gets a mud thread! :D
Heres my truck:
http://i88.photobucket.com/albums/k179/sboarder2011/kalseyspics221-1.jpg
http://i88.photobucket.com/albums/k179/sboarder2011/101_004922.jpg
http://i88.photobucket.com/albums/k179/sboarder2011/l_2e1499e08d77947826193033443cc61a.jpg
http://i88.photobucket.com/albums/k179/sboarder2011/P1010008.jpg
http://i88.photobucket.com/albums/k179/sboarder2011/l_77ef40d6e12246aaa14a6813a6770bff.jpg
http://i88.photobucket.com/albums/k179/sboarder2011/jump44.jpg



514 Stroker with Cobra Jet aluminum heads. 800hp, C6 trans with 5 clutch Cobra Jet setup, Profab 3.75-1 T Case, 2.5 ton GM Axles, w/ 6.17 Gears, 4linked with kings sittin on 54"boggers

Sweet action pic's dont know wich one i like best

seen how you guys in Minnesota roll in trucks gone wild & 4x4 mayhem dvd's
How do you like those tires in the mud and launching ?

had to quote this so no-one missed the action shots :D

thanks!! some of us are hoping to come down to FL this summer or winter.
i love these tires, i had 49"iroks, but those dont grab or throw the mud like the boggers do.

even though its done with , did you ever make it to a florida mud fest in
Okeechobee ?

a group of other guys from up here went down for okeechobee, but i wasnt lucky enough to go.... we wanna come down to RNYC or muddie gras or another big event down there.

a group of other guys from up here went down for okeechobee, but i wasnt lucky enough to go.... we wanna come down to RNYC or muddie gras or another big event down there.

we are going to RNYC ,

as for muddi gra's theres no word on that . RNYC is 100% ready and gonna be awsome !!!!!

we missed the last one at RNYC cause muddi gras had to cancel last minute and we were all screwed up then :(

hope we get to meet , You'll probably see me flagging you for a pull :laughing: ( samuari )

lol yeah hope to meet ya down there.

Checking out the mud in Annonia, TX with my new rig.

YouTube - June Mud Bog (http://www.youtube.com/watch?v=GLcoDhExm94)

Checking out the mud in Annonia, TX with my new rig.

YouTube - June Mud Bog (http://www.youtube.com/watch?v=GLcoDhExm94)

Awsome Video
Very cool rig

Thats a straight up bad ass bogger :D

Big Block... Damn dude, sick ass bog buggy

Hey MNmudman, (TIM) they just announced Chads Ranch is going to be JULY 11th, same time as Goldenspike is having there run, were you invited to friday night at chads yet? if so get me in there friday! TGW will be there filming again.

I love the fact that you made it threw the Bounty Hole, looks sweet!

Checking out the mud in Annonia, TX with my new rig.

YouTube - June Mud Bog (http://www.youtube.com/watch?v=GLcoDhExm94)

Sweet video! :smokin:

Bounty hole last saturday in bunnell fla .

Pit bull was the first truck in months to open the bounty hole, for the rest !!:D
@1.58 seconds is us going for it .

the first few trucks r on DOT tires going the opposite direction than the way we went. There was a wall of mud that needed to be broke
Mission accomplished
http://i663.photobucket.com/albums/uu357/muddycook/th_JuneBountyHole.jpg (http://s663.photobucket.com/albums/uu357/muddycook/?action=view&current=JuneBountyHole.flv)

awesome video

awsome vid

Going tomorrow night to Bubbas Mud ranch in auburndale florida to watch these 2 trucks(in videos ) battle it out , head to head
1 . tire pull
2. hill in hole
3. mud drag

Then they are having a heads up mud drag also @ bubbas mud ranch

" PIT BULL " truck will be there :D be back sunday and fill you in on the results and share video's if possable

truck 1
C&D development truck ( sick truck )
Bad Ass Mud Truck Video by "WildTime" - MySpace Video (http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=20205924)
Against Big nasty ( ford with hooders ) i heard he may have a surprise:eek:
YouTube - Hortense052309 (http://www.youtube.com/watch?v=9Rt_NW_pPgE)

well... we need updates... i'm rooting for the BIG NASTY...

well... we need updates... i'm rooting for the BIG NASTY...


Big nasty won :D hank is a super cool guy & the crew
even though we were for either truck to win ......It was awsome!
C&D truck is a bad mo fo also.

A Video
YouTube - BNvsCD at bubba's (http://www.youtube.com/watch?v=zmeBwIePYq0)
http://i40.photobucket.com/albums/e239/diggin33/BubbasMudRanchVideos/th_DSCN4672.jpg (http://s40.photobucket.com/albums/e239/diggin33/BubbasMudRanchVideos/?action=view&current=DSCN4672.flv)


Mr big nasty & me
http://i294.photobucket.com/albums/mm112/TRAINHORN69/The%20guys/CDBignasty045.jpg

See you on the other side big block :laughing:
http://i291.photobucket.com/albums/ll310/BIGGTW71/th_extra206.jpg (http://s291.photobucket.com/albums/ll310/BIGGTW71/?action=view&current=extra206.flv)

noice...

A slide show of where we were for the 4th
redneck yacht club in punta gorda florida

Pit bull truck took first place in the V tread class :D
The pup ( sammi) came in 5th , couldnt make my second pass my starter was toast after all that clay packed around it !!!

Enjoy
YouTube - 4th of July at the Redneck Yacht Club in Punta Gorda, FL (http://www.youtube.com/watch?v=prLUa-jqJ7Y)

Thanks for the slide show!

The green jeep in the beginning is sweet looking!

Looks like some nasty mud.

New/used carbon fiber rim's bought from rick stumberfield ( bad habit truck)
http://i294.photobucket.com/albums/mm112/TRAINHORN69/racetruckfunnypics003.jpg
radiator mounts upper & lower ........They made them :D
http://i294.photobucket.com/albums/mm112/TRAINHORN69/racetruckfunnypics015.jpg

http://i294.photobucket.com/albums/mm112/TRAINHORN69/racetruckfunnypics016.jpg
I make them laugh
http://i294.photobucket.com/albums/mm112/TRAINHORN69/racetruckfunnypics017.jpg
Hope ya-all enjoy your weekend :D....Yup it's fast
http://i294.photobucket.com/albums/mm112/TRAINHORN69/racetruckfunnypics014.jpg

nice....

Thank U cj5 , we are mounting aluminum rims on " THE PUP " tomorrow morning

I didn't get his jimmy dean cuts ( just borrowed ) but i got new rim's :laughing:
we were gonna cut my 39.5's but i've decided to go with tractor tires in the NEAR future !!!!

I no you guys are loaded with connections , if you no of any tractors measuring no more than 46 tall ( cheap ) lol...............send me a link

Thanks

Ill sell you some. I'll look up some options and shoot you a PM. What rim size?

I might would send a sticker with it...since you didnt visit our booth at RNYC :rolleyes:


Thank U cj5 , we are mounting aluminum rims on " THE PUP " tomorrow morning

I didn't get his jimmy dean cuts ( just borrowed ) but i got new rim's :laughing:
we were gonna cut my 39.5's but i've decided to go with tractor tires in the NEAR future !!!!

I no you guys are loaded with connections , if you no of any tractors measuring no more than 46 tall ( cheap ) lol...............send me a link

Thanks

well im looking for a tractor r1 , don't no if they make a 46in tall 44 smallest???
don't know the tractor terms ........lol
We have not come to a agreement on size ............the guys are telling me how MY TRUCK needs to be ...............Soon we will be flipping a coin to decide :laughing:

send me some sizes and price , not sure about rims
PUP is 10 bolt now ( sucks ) so if anything we are gonna go dana60 front
dana70 rear ........soon , but not soon enough !!! But if the tires are cheap enough i can at least start with that , and would love to support your business !

RNYC
I didn't see you guys and i was every where at RNYC , the heat & the grey goose didn't mix well ..............lol
Sunday i was down for the count .......................:shaking:

http://www.pirate4x4.com/forum/showthread.php?t=763869&highlight=tractor+tires

you should find some sizes there.

tiretown.com has some pretty cheap prices on blem tires.

Nice

Saturday went to a benefit for a man donald who has cancer and is in need .
It was a Mud bog & cook out all proceeds went to help him in time of need .
It was a HUGE turn out !!!!
My husband and i put on a little show at about 42 seconds in video & he did his little jump , he love's to catch air :D
But we forgot to take off the bump stops so they are now crushed from landing and got new one's the way , The PUP had a fuse problem , kept popping my fuel pump fuse , so gotta trace the problem & buy a new fuse panel , i kinda said fuck it till i ran out of fuses & fried the panel in the process....OOOPS
Enjoy
YouTube - Donald Creasman Mud Bog Benefit 5 (http://www.youtube.com/watch?v=E2dnnRFds6o)
Bump stops
http://i294.photobucket.com/albums/mm112/TRAINHORN69/radiators013.jpg

http://i294.photobucket.com/albums/mm112/TRAINHORN69/radiators014.jpg

Who's that black girl in my truck .......lol
Oh thats me :)
http://i294.photobucket.com/albums/mm112/TRAINHORN69/TRUCKS/blackout.jpg

Picture from a article in the Naples news :D
we are also in June & July's issue of woods & water

Just showing love to my fan's
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Formyfans.jpg

jesus, i bet you have more time washing than building at this point... that mud/water plays havock on wire and shiat doesn't it.

looks like fun. i sure do miss fl muddin.

jesus, i bet you have more time washing than building at this point... that mud/water plays havock on wire and shiat doesn't it.
looks like fun. i sure do miss fl muddin.
We will be racing in Douglas Ga when race truck is done & Cobb

you could not even see my gas or brake pedal after that run it was buried!!
We got the wiring down pretty good now and sealed as best we can !
had to buy a new fuel pump , got it put on yesterday :D:D

my main problem is starters !!!!!!!!!!!!!!! I go threw them all the time
right after that run , i was done ....my starter died and forgot extra one , we had just had tow rig detailed and all shit was gone :shaking:

we put a shield around starter area and it just held the mud in .
so back to the drawing board !!!!


we have one more trick , i will tell you how it works out " If it does "

We will be racing in Douglas Ga when race truck is done & Cobb

you could not even see my gas or brake pedal after that run it was buried!!
We got the wiring down pretty good now and sealed as best we can !
had to buy a new fuel pump , got it put on yesterday :D:D

my main problem is starters !!!!!!!!!!!!!!! I go threw them all the time
right after that run , i was done ....my starter died and forgot extra one , we had just had tow rig detailed and all shit was gone :shaking:

we put a shield around starter area and it just held the mud in .
so back to the drawing board !!!!


we have one more trick , i will tell you how it works out " If it does "

i use spray foam , the kind that you use for insulation,,, i have not had to replace my starter after i foamed it up.just spray it around all the openings and your done.

That's a full day just washing that thing lol.

Thanks for the foam tip

hell yeah it's a full day + of washing and i'm still finding clay :D

I love it !!!!

Pictures of
http://i525.photobucket.com/albums/cc336/pika_coro31/image001-5.gif
coming soon

good luck with the foam and let me know how well it works for you

$tucco moneys new rack & pinion steering :D
http://i294.photobucket.com/albums/mm112/TRAINHORN69/TRUCKS/STUCCOMONEY2025.jpg

So I think u better get a move on then HornyTrain,:D

Show everyone the pics of my hunk of junk:)

and let the bashing begin:D


$tucco Money Racing is coming out w/ a vengenace!

the only bashing your gonna get is from me on the track :flipoff2:
ya- no like i did last Saturday night to all :laughing:

" More to come "

Heres Redneckmotorsports & me, he's the head pit guy and my BFF
And let's not forget ass hole :p
http://i294.photobucket.com/albums/mm112/TRAINHORN69/FrankI.jpg
New motor
http://i294.photobucket.com/albums/mm112/TRAINHORN69/bithlo2franksmotor013.jpg
Here's the truck he got now & is re doing,was the " COCKY WHO " truck always a hell of a show !!! :grinpimp: ( 2nd truck running & at 1:40 )
" enjoy "..............I LOVE THESE GUYS :D
YouTube - bithlo hill-n-hole pt2 (http://www.youtube.com/watch?v=pfJsepEptf0)


Cocky who's new ride " NO SWEAT " Awesome dude :D

YouTube - "Trucks Gone Wild" Hill in the Hole June 28th; "No Sweat" Samurai at Bithlo (http://www.youtube.com/watch?v=g5H6-Spd3rU)

In the beginning :D
http://i525.photobucket.com/albums/cc336/pika_coro31/image001-5.gif
http://i294.photobucket.com/albums/mm112/TRAINHORN69/frank1.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/frank3.jpg

The " New motor " ..............again
355 SBC 13.5:1
World Sportsman II 2.02/1.60/ 64cc Port & Polished
SCAT Steel Crank
Eagle I Beam Rods
Edelbrock RPM Air Gap
800 Race Demon

You can guess the HP:D

http://i294.photobucket.com/albums/mm112/TRAINHORN69/frank2.jpg
Say's it all
http://i294.photobucket.com/albums/mm112/TRAINHORN69/franks%20bullshit/FRANKSPICTURES026.jpg

This is where Pit bull truck will be racing Saturday night racing :D
The more tracks opening the better !!!
Then we are going out with about 10 that we know of , bad ass buggys , down in south florida ! I'll try to take pic's,that depends on my mood.
Let's hope the tire's clean out ..............Intense :evil:
http://i294.photobucket.com/albums/mm112/TRAINHORN69/palmbeachflyer.jpg

I'll be running that PBIR track also.

Lucky you I'm in a different class :flipoff2:
I hope my 34"LTBs will get me to the the other end of the hole

I'll be running that PBIR track also.

Lucky you I'm in a different class :flipoff2:
I hope my 34"LTBs will get me to the the other end of the hole


and what class would that be ???
cause i just decided to take The PUP ...........on 39.5's

They made me unload & and i gotta reload the trailer cause i waited so long to decide ..........:laughing:

also i got people out at the track right now and the pump got there to pump out water,It looks nasty i was told !! some of the buggy boys will be tearing it up this afternoon .

say hello .....i'll have my new " Pirate 4x4 " hat on

Sorry, even the pup is much too big for me to run against :laughing:

I'll be in the 4&6 cyl 36" and under class.

And i will be cheering for you :grinpimp:

heard the the hole is nasty ............they had to work on it today cause
they want truck's to be able to make it :laughing:


have you been to Corbitt before ??? going there sunday on buggys :D

Yeah I'm going there knowing I probably won't make the whole run, but I have a feeling not many in my class will if it's going to be at all challenging for the big stuff.

I've been going to Corbett all my life, you will have a good time there for sure. Only a handfull of trails are open this time of year so you won't get to see much of the good stuff

This will be our first time out on buggys like this :D

Usually I hop on them after i trash something on my truck :laughing:
been on a few buggys at event's and was fun stuff .


example below :flipoff2:
and that fanny pack is full of all kinds of good stuff & band ade's
http://i294.photobucket.com/albums/mm112/TRAINHORN69/ME.jpg

I like that example Train. :flipoff2:

Howdy :D

Nice meeting you yota boy :p got pic's of you i'll send em to you!
and i'll have video to share soon

$tucco money team
16.9 class
1st The grouch
2nd Pit bull

1st 44 boggers
My turn

Me i don't know for sure but it was in top 5 peoples claim.
But i know i won alot of people money :laughing:

That was a fun event. Good to meet ya also, those are some nice trucks you've got.

Have a good time in corbett?

We had a blast at corbett :D

buggys kick ass ....we went to a camp out there and it was NICE !!
seen 2 baby gator's but no deer or hog's. we would love to bring our trucks out there to ride the power line's ......But that would be alot of race fuel to burn to get out there.

race
Funny story, some drunk guy about got knocked out cause he would'nt leave pit bull steve alone, he wanted to hide in the bed of his truck and at take off belly flop off the back of Pit bull truck ........:shaking: & :laughing:

Did you see the jeep i was racing hit the dozer ?? eeekkkkkk

Thanks Monster mudder A.K.A "Team broke & busted " for the video & letting us crash at your house all weekend again :D

Enjoy
YouTube - PBIR Mud Boggin (http://www.youtube.com/watch?v=eqh3t8Sr5YQ)

:smokin:

Some awesome rigs for sure!!! That pit on the other hand looked way too rough and had too much water IMO. Seemed like a bumpy water pit....

Noice....

very cool video

So did you foam your starter? and if you did i bet it worked great huh?

No we did not ! and they are lucky all went well ...........lol
something needs to be done about it though.

As for the water, there was a big diesel pump pumping water out the night before, so it could of been worse
but the bottom was sloppy .
I like to catch air so the hill in hole vibe was cool. :D

Next event triple canopy ranch .......Its to hot out gotta slow down.

The pup gets tractor tires soon

Howdy folks :D

here's one of team mate " Mighty dog's " truck in the making

1971 f100
2.5 ton , 638 BBF ,C-460 pro stock heads,5 stage dry sump oil system,SCS case,4 linked with King coil's,HP around 1,200 + .....14.9.24 r1's
Full cage ( A must )
He also has a "1948 Willy's jeep" as seen in Video earlier in thread.
416 cubic inch windsor,MP4 35 tranny,dana20T case, 488 gear's , locker front rear , chrome alloy axles ,39.5 boggers, Arizona drive line performance 45 CV on rear , strange center section on the 9 inch
Powered by grey goose for now :p
http://i294.photobucket.com/albums/mm112/TRAINHORN69/JOHNNYO/ford1.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/JOHNNYO/ford10.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/JOHNNYO/ford11.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/JOHNNYO/ford12.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/JOHNNYO/ford6.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/JOHNNYO/ford7.jpg
Mock motor , for dry sump & motor mount's
http://i294.photobucket.com/albums/mm112/TRAINHORN69/JOHNNYO/ford8.jpg

Thats all i got right now........But it's gonna be sick & gonna be wrapped with
scorpion racing product's !!
Trying to debut it at the PRI trade show in Orlando fla , in December 09

Much love for JohnnyO :D

:bounce2:

My man bought me tractor tires 11.2x24 v treads we are going to pick em up today .....for " THE PUP " they are on tractor rims with a 6 lug adapter plate

but the question is how long will my 1/2 tons handle them :laughing:
and will i be able to even turn .....We shall see :laughing:

May have to break out the saw and chop up the body .........lol

The 1/2 tons are temporary i just cant wait so them fuckers are getting bolted on :shaking:

Will miss my never touched the pavement Boggers with aluminum light weight , bead lock rims :(
http://i294.photobucket.com/albums/mm112/TRAINHORN69/pupscreaming1.jpg

cool, congrats you will have to put up pics a.s.a.p!

Sorry a.s.a.p is not gonna happen , unless i only go straight......... " NOT "
so the "Plan " has been pushed forward :D

A custom fabricator is coming down to sketch a plan Saturday& talk numbers.

It needs to be beefed up or i will " KILL IT " :laughing:

Those are the exact tire's i needed so i'm pumped.
----------------------------------------------------

got seat done in mud drag truck, so that is cool ( pic's tomorrow )

:(

My friend barrel rolled his Sammi at Dennis Andersons motor sports park
last night , he is fine and will be back !!!!


R.I.P No Sweat truck :(
YouTube - "Trucks Gone Wild" Hill in the Hole June 28th; "No Sweat" Samurai at Bithlo (http://www.youtube.com/watch?v=g5H6-Spd3rU&feature=player_embedded)

glad is alright. sucks about the sammy though. good luck on the tractor tire install

yeah CJ it really sucks he's a good dude !!
I'm waiting on the video of the rolls :eek:

Washing the pup now to bolt on a tractor tire and check it out, to see if i can possibly make it work for a labor day event, fabricator couldn't make it Saturday. I wanna TRY and wait for him " he's Good
He built this truck for one of my buddy's
YouTube - Badass Diesel (http://www.youtube.com/watch?v=9Nyv9OrWqPM)


heres the seat done in Drag truck , almost ready for the pilot
http://i294.photobucket.com/albums/mm112/TRAINHORN69/seats.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/seat1.jpg

i know Charles pretty good, that is a wicked bad Diesel. can't wait for the pics.

COCKY is back :D

Before ( sean was just fine )
http://i294.photobucket.com/albums/mm112/TRAINHORN69/TRUCKS/cocky1.jpg

new truck first time out Saturday..........the ending was almost a endo :eek:

YouTube - Mud Racing (http://www.youtube.com/watch?v=1w-eKAjWN4M)

aahh shit , had them put the tires on with the 1/2 ton's . i need it for a labor
day bash !! just gotta slow it down and try and save the 1/2 tons.
we have 30 spline alloy in there so its up graded junk !

also tossing around just going 2.5 ton's , I break shit alot , i'm not easy
on our trucks :D

got alittle higher so i'm stoked.
http://i294.photobucket.com/albums/mm112/TRAINHORN69/pupnewtires010.jpg

52in - 44in
http://i294.photobucket.com/albums/mm112/TRAINHORN69/pupnewtires001.jpg

drilling the adapter to fit better
http://i294.photobucket.com/albums/mm112/TRAINHORN69/pupnewtires008.jpg

http://i294.photobucket.com/albums/mm112/TRAINHORN69/pupnewtires005.jpg

Damn red chevy ......that kid has no fear :laughing:

YouTube - Bithlo Motorsports Hill-N-Hole: That Damn Red Chevy (http://www.youtube.com/watch?v=eiNh8cgVaVE)



Damn red chevy goes over saturday night :eek: @ The chicago Style race
YouTube - Damn Red Chevy's last run (http://www.youtube.com/watch?v=P2eElPw2l-Q)

Ouch...

Damn....

Red....

Truck

New motor going in new truck in mn, read the thread pretty cool.http://forums.minnesotamud.com/showthread.php?t=8804&page=9

New motor going in new truck in mn, read the thread pretty cool.http://forums.minnesotamud.com/showthread.php?t=8804&page=9

That trucks gonna be nasty !! :evil:

Also had the same set of header's , We sold them cheap

new adapters, the others didn't line up good enough.
Going 2.5 ton next , but for this weekend 1/2 tons will have to do

http://i294.photobucket.com/albums/mm112/TRAINHORN69/adapters007.jpg

Not bad for a Quicky :D
http://i294.photobucket.com/albums/mm112/TRAINHORN69/adapters003.jpg

Thanks daniel .........you Da man
http://i294.photobucket.com/albums/mm112/TRAINHORN69/a.jpg

Ouch!

ended up taking off the tractor tires .......wouldn't have worked!

so put the boggers back on............i launched out of a hole and broke the whole center off the rim , went about 80ft wide open and realized something isn't right :laughing:............got out and my tire was floating away.
next week my truck will be heading out to be redone by Southern Customs :D

2.5 ton & 4 linked , I'm to fucking hard on the truck for anything less :smokin:
maybe selling the 11.2' i got and going with 14.9's instead.
Also even though our fab guy is a king coil guy , we have decided that FOA has been good to us and we are gonna put a set under it also , I'm excited.

My donut tire :laughing:
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Pupdown.jpg

Pit bull, slung a timing belt later that day ....good times
the motor has been running strong for a year, so i guess it's all good !!!
had the motor out in like 20 minutes and its getting fixed :D
I asked him to hop it up with a 200 shot of NOS .......Not sure if he's gonna
http://i294.photobucket.com/albums/mm112/TRAINHORN69/pitbulltcr.jpg

triple canopy ranch ( 4:12 the after math ) :0
YouTube - Triple Canopy Ranch Labor Day Weekend Photo Slideshow (http://www.youtube.com/watch?v=NWrP6FZ5qCQ)

went to the races today to watch, our trucks are down.

So the 1 ton class was up
3 truck team race
rabbit truck
2-1 tons pull a tire

The dozer came and parked right in front of our dually & the fence( for safety )....We thanked him for that , right away !!
The very first race as you will see he hit's the dozer head on @ full speed and moved it a few feet !!!! :eek:
Not sure what he was thinking at the time, but he didn't stop fast enough.
This could of been alot worse for alot of people if it wasn't for the dozer.

he's pretty fucked up broken bone's but in good spirits.
We wish him the best.
http://i689.photobucket.com/albums/vv259/Monstertruck1/RedneckGamesCrazyRun/th_DSCN5404.jpg (http://s689.photobucket.com/albums/vv259/Monstertruck1/RedneckGamesCrazyRun/?action=view&current=DSCN5404.flv)
From the bed of my truck :eek:
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Bithlorental044.jpg

I need to come to the mud section more often, you retards make me feel smart again.

thanks for the sig :laughing:

:laughing:

Things wouldnt happen like this if people would follow simple directions !!!
The rabbit truck doesnt need to be hauling ass, as the other 2 trucks are switching a tire ........There is plenty of time.
And your brakes dont work when your in the air.:shaking:

We have been doing these race's for long time without inncodent, it was do

Got alot of events & race's coming up so stayed tuned, it will be packed
full of dumb shit :D


The mud's on the bottom , these trucks stay on top :p
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Bithlorental035.jpg

1. the exit of the track looks too short?
2. never park/stand at the end?
3. jackass flying threw the pit needs to learn how to drive.....

Glad you guys were not injured......casue this mud forum would crash also!

now get to working on your rigs :D

agree the shut down seems to short, the finish line is right where the mud ends.... that was addressed earlier in the day ,and the rest of the race went the other way after this incident, the shut down is only that way for this type of race. All others its the opposite.......And we race there ALOT with NO issue's.
I'm sure this will be changed now for good!!!!

We parked the dually there on purpose,It was parked so close to the fence the bumper was touching
people don't watch there damm kids, so we figured this would keep people back, you can replace a dually .........not a life.
We didn't sit there all day, till then........ guess it wasn't our time to go

Tommy has been driving along time with his dad . hes the last person the track officials would of thought to fuck up , he's got a busted hip and is in surgery ...........but he will be back !!!

Thanks
build coming soon , but not soon enough :D

Got one of our oopps moments............ i'll post it soon

Redneck games

Look for a write up of my husband and I and our trucks in October issue of
Woods and water magazine :D

YouTube - Bithlo Redneck Games Video Clips from Sunday 9-13-09 (http://www.youtube.com/watch?v=yZ9HNLDyyBQ)

congrats on the woods and water write up, i know is was ecited when i saw my truck in Mudlife magazine. and nice video!

congrats on the woods and water write up, i know is was ecited when i saw my truck in Mudlife magazine. and nice video!

What issue of mud life are you in ?? or are you gonna make me go through them and search :laughing:

I see trucks in my sleep, please just tell me .......i'm a busy girl :D

Edit.................................sshhhhh...... ..........................................



Pup leave's this week to get hacked up and i got a photo guy there so i'll get to see the stages !!!!!!!!!!!!!!!! Should be done in like 2 weeks

I need a 2.5 front ( top ) ......................NOW

Even my dog wants those boggers off my truck and the tractors on :evil:
http://i294.photobucket.com/albums/mm112/TRAINHORN69/TIRESBITER-3.jpg

Took that shit right off

I drove full speed ahead, from back where the water is on 3 tires:lmao:

http://i294.photobucket.com/albums/mm112/TRAINHORN69/fktheboggers.jpg

The kid was upset he didn't get his ride ..but the parents weren't :laughing:
http://i294.photobucket.com/albums/mm112/TRAINHORN69/kidslovethepup.jpg

Did the center break out of that rim? I can't figure out what happened. It doesn't look like the center is still on the axle, or maybe it is and I just can't see it through the mud. :doh:

been there done that....got to welding, drinking, welding, drinking weld, drinkkkiinnggg, pass out. head out the next day, forgot that you welded three rims instead of four...good times....:laughing: well now is a better excuse than ever to up grade.......

Yes the center broke off :D.....but stayed attached to the axle
But the rims were light weight aluminum rims,we put them on cause of a
few race's i was in , and just left them , they were to weak for my driving
style ...............lol

Like 5 guys said lets get the welder and fix it, and get you back out :laughing:

as you can see that wasn't gonna happen , once i showed them the center.
http://i294.photobucket.com/albums/mm112/TRAINHORN69/mycenter.jpg

See the Lug nut ........edit : sorry it's small, I suck at cropping stuff
http://i294.photobucket.com/albums/mm112/TRAINHORN69/fktheboggers-2-1.jpg

The 1/2 ton's are out ...I have had alot of fun with those.

Will have more fab progress pictures soon.
My picture babe is holding out on me i think................:(

Oh it's getting good :D
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Southerncustoms1.jpg

shit Train, tell them to throw some full tracks under it and run it... ha ha...

:D

Woods n Water october issue

http://i294.photobucket.com/albums/mm112/TRAINHORN69/woodsandwater.jpg

awesome write up....its great to see a couple get into each others hobbies and be supportive..congrats to both of ya.

looks like before to long since the pup is growing up and getting big, what are you going to call it then :D

I couldnt change the name of the truck, people would'nt like that much !! :D

My progress has slowed down, cant get my 2.5 front till this sunday,A guy was
supposed to have me one this last sunday, but it never went threw after waiting a week for it, so that set it back even more.

I'm a bit disapointed with that situation.

And i may sell the 11.2's and get 14.9's ......just get it over with.
they all know i will want more ................:laughing:

Got a little change in plans on the set up for the pup :D

We are gonna go with the wish bone /reverse 4 link ..........what ever you all call it .
gonna stretch the front roughly to a 120 wheel base , its gonna be set up like a " Hill n hole " truck .

We will be making some NC & Georgia trips when the drag truck is done, So The pup can fit right in :D
The truck is gonna be set up for the future 14.9's ..........we are also debating on Air shocks, looking into how much they can take " ya no " ....lol...................FOA'S
How do you like the air ride shocks,to the guys that are running them ??

For now we are sticking with the 358 SBC ..........but if work picks up, steve is gonna beef that up also !!! ( new motor ):evil:

Example " The Grinch "
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Grinch.jpg

http://i294.photobucket.com/albums/mm112/TRAINHORN69/2560193390103635915S600x600Q85.jpg
Sunday at the trucks gone wild event, we couldnt go without a truck since all 3 are under construction so we brought " baby truck " :D

Yup we rolled it a few times ........lol
http://i294.photobucket.com/albums/mm112/TRAINHORN69/babytruck.jpg

I am probably going to see him Saturday, i will take some close up pics for you of the front and rear, i will also get some of the links

Thanks dude thats really cool ~~~~ when the grinch fired up his truck at mudfest
we all came right back to life from the night before ..............:laughing:
badddddddd assssssssssssssss :evil:

off to the other project : Pit bull

got the bed sides on & the rest is on my camera, i'll post them later
http://i294.photobucket.com/albums/mm112/TRAINHORN69/pupparts008.jpg

Got a little change in plans on the set up for the pup :D

We are gonna go with the wish bone /reverse 4 link ..........what ever you all call it .


Train,do you know any mini truckers? The reverse 4link is a popular term with themand install, but its not something i would want in a mud truck. the best way to describe it would be all 4 bars running from the back axle toward the back bumper area aka reversed of the normal way. it causes all sorts pinion angle issues.
cant wait to see how it comes together. Trout

Yes blazen my son is a mini trucker ( pic below ) he mentioned he wouldn't
do it either , but i have faith in my fabricator and he says its good .


I'll be sure to keep you posted on the out come, we know some that run that way and haven't had a issue that i know of .
Thanks for you input :D

http://i294.photobucket.com/albums/mm112/TRAINHORN69/justinlow.jpg

cool, could you tell your son he has a nice looking truck, and ask him if he remembers seeing a purple right hand drive s10 blazer with cali grafics on it. i own/built the truck.

Do you have a picture of it ?? I'm sure he has, hes all over the place :)
They are headed to " Slam fest " in a few weeks.
he told me last night,hes got a guy that wants to paint & put graphics on his truck and will do it for free for advertisement , he's stoked about it :D
I'm so glad he got out of the ricer scene and went low :smokin:

http://i294.photobucket.com/albums/mm112/TRAINHORN69/pupparts002.jpg

here is more of the grinch,,http://inlinethumb02.webshots.com/42561/2384769900103635915S600x600Q85.jpg (http://rides.webshots.com/photo/2384769900103635915wwgCdc)http://inlinethumb36.webshots.com/43299/2413621110103635915S600x600Q85.jpg (http://rides.webshots.com/photo/2413621110103635915bvMsGG)http://inlinethumb48.webshots.com/46127/2623256000103635915S600x600Q85.jpg (http://rides.webshots.com/photo/2623256000103635915SlZBTq)http://inlinethumb25.webshots.com/45656/2345005540103635915S600x600Q85.jpg (http://rides.webshots.com/photo/2345005540103635915Njnfnq)http://inlinethumb28.webshots.com/45723/2471950630103635915S600x600Q85.jpg (http://rides.webshots.com/photo/2471950630103635915sfpzNH)

Thanks for the pictures

Pit bull trucks motor is done :D
http://i294.photobucket.com/albums/mm112/TRAINHORN69/motorrrr.jpg
http://i294.photobucket.com/albums/mm112/TRAINHORN69/motorrr.jpg

Bed's done :D

http://i294.photobucket.com/albums/mm112/TRAINHORN69/motor015.jpg

very very nice,,,what are the specs on the motor? dyoed?

its a 373

haven't dynoed it , but our guy puts it on his diesel dyno and tunes it for us
so it's a drop and go deal :D

those are top secret numbers there bud,
15degree heads 373, like train said all the rest is top secret information:smokin:

like train said all the rest is top secret information:smokin:

I said no such thing about top secret :shaking:

i don't feel like typing all the shit and actually its already in this thread somewhere...........we flung the belt and bent some push rods

Char Ching ............all better now 8,000 rpms here we come

here's that smiley you want to give me right now Redneck.................:flipoff2:
http://www.trucksgonewild.com/

:bounce2: The Pup

I got 2 teaser pictures of my build, more to come
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06882.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06890.jpg

A video of just one moment we missed this weekend , We don't have a diesel "Mud truck " ........so i like to watch them & hear em.

It's floats :p

GIMAMMOTH
YouTube - MUDDIGRAS 10-17-09 (http://www.youtube.com/watch?v=-moVqovfWUo)

just checkin those out... did ya'll bring anything down or just spectators?

We didn't go at all......first Muddi Gra's we missed :(

But our trucks are both down right now, under construction........Ya no
I'll have picture's when they are done :D

We may not be back out till November 7th

http://racepbir.com/events/view/3758/42.html

Do you have a picture of it ?? I'm sure he has, hes all over the place :)
They are headed to " Slam fest " in a few weeks.
he told me last night,hes got a guy that wants to paint & put graphics on his truck and will do it for free for advertisement , he's stoked about it :D
I'm so glad he got out of the ricer scene and went low :smokin:


Here you go.
http://i399.photobucket.com/albums/pp78/blazentrout/cover/GaugeMagazine_Trout90Blazer_002-1.jpg

Its like Christmas in October :bounce2:

Look what my man just ordered for my truck
http://i294.photobucket.com/albums/mm112/TRAINHORN69/coil-w_LRG.jpg

http://i294.photobucket.com/albums/mm112/TRAINHORN69/p-blue3.jpg

A video of just one moment we missed this weekend , We don't have a diesel "Mud truck " ........so i like to watch them & hear em.

It's floats :p

GIMAMMOTH


Is that supposed to be deep??? I've rolled through deeper holes then that. :flipoff2: JFWY. But really, I've always wanted to bring one of these out to play but not sure what I'd do if I actually stuck it.

http://i91.photobucket.com/albums/k297/montecarlo31/Picture216.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06905.jpg
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06904.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06907.jpg
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06908.jpg
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06892.jpg

frame b4
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06917.jpg
mid way
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06919.jpg

after
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06926.jpg
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06924.jpg
other side
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06929.jpg
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06930.jpg

:D

The pup update build
new Cradle pictures & Sub frame stretched
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06940.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06934.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06942.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06941.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06937.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06939.jpg

Pit bull bed done,cleaned up and painted :D

http://s2.postimage.org/vknx0.jpg (http://www.postimage.org/image.php?v=Tsvknx0)

http://s1.postimage.org/_M9NA.jpg (http://www.postimage.org/image.php?v=gx_M9NA)[/quote]

http://i294.photobucket.com/albums/mm112/TRAINHORN69/daniealstruckpitbullbed017.jpg

Nice very very Nice!!!!

Is that supposed to be deep??? I've rolled through deeper holes then that. :flipoff2: JFWY. But really, I've always wanted to bring one of these out to play but not sure what I'd do if I actually stuck it.

http://i91.photobucket.com/albums/k297/montecarlo31/Picture216.jpg

Seen it. It wasn't a CAT but it said Trex on the side and was neon green. And it was stuck for days until the mud dried up.

The new trucks gone wild DVD is out now, you can see my trucks in action in
the new TGW 8 also in 4,6 & 7 .......Enjoy

http://i294.photobucket.com/albums/mm112/TRAINHORN69/dennisanderson063.jpg

The new trucks gone wild DVD is out now, you can see my trucks in action in
the new TGW 8 also in 4,6 & 7 .......Enjoy

http://i294.photobucket.com/albums/mm112/TRAINHORN69/dennisanderson063.jpg

Yup and on that vid are a couple guys i know from around here that go to Bricks in Poplar Bluff, MO. Haven't made it yet as i got a motor and tranny but nothing to put it in now :shaking:

OH and if you get a 740 stuck you better have something huge to pull it out. Like another piece of equipment

Some of the welds Chris did on my truck ..............Nice :smokin:

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06974.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06976.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC06977.jpg

Seen it. It wasn't a CAT but it said Trex on the side and was neon green. And it was stuck for days until the mud dried up.

That's why, no diff locks (all axles are open on a terex). 6 wheel drive, diff locks, interaxle locks and even 33 / 33 / 33 weight distribution. I can walk this thru mud pushing over the front of the hood/grill area and keep moving loaded down.

More of " The PUP "

Will be done next week and my FOA'S are on the way :bounce2:

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07014.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07015.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07020.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07021.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07022.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07023.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07024.jpg

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07013.jpg[/quote]

Exhibition run gone bad :eek:

This was the first Pit bull truck
we are on our second body after this little oops.
We did the whole truck all over , and made it as safe a possible.
now our focus is speed :D

Stucco Steve luckily came out with a few gash's & a bruised ass bone, as the truck was climbing the tower, he leaned over in the seat & saved himself from serious injury!!
we learned the importance of a roll cage , wich was getting put in but not yet put in the truck at that time.
We are aware of the stupidness of it now !!!!

He hit a set of deep ruts and his tire's pulled him in.
the girl video tapping , was young and didn't comprehend what had just happened, she did real quick!!

steve flipped his truck at lakeland Video by ஐAlisha ஐ - MySpace Video (http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=21895825)

http://www.kimasmuddawgs.com/photos/705163186_gqLvY-L.jpg

http://www.kimasmuddawgs.com/photos/705163340_oQJ9S-L.jpg

http://www.kimasmuddawgs.com/photos/705163524_aaAZc-L.jpg

http://www.kimasmuddawgs.com/photos/705163701_gWRGE-L.jpg

http://www.kimasmuddawgs.com/photos/705163888_NCWdW-L.jpg

http://www.kimasmuddawgs.com/photos/705164028_vkFgi-L.jpg

http://www.kimasmuddawgs.com/photos/705164173_qDtV3-L.jpg[/quote]

Exhibition run gone bad :eek:

This was the first Pit bull truck
we are on our second body after this little oops.
We did the whole truck all over , and made it as safe a possible.
now our focus is speed :D

Stucco Steve luckily came out with a few gash's & a bruised ass bone, as the truck was climbing the tower, he leaned over in the seat & saved himself from serious injury!!
we learned the importance of a roll cage , wich was getting put in but not yet put in the truck at that time.
We are aware of the stupidness of it now !!!!

He hit a set of deep ruts and his tire's pulled him in.
the girl video tapping , was young and didn't comprehend what had just happened, she did real quick!!
[/QUOTE]

Now I'm all for the skinny pedal but it seemed he never let out of it or hit the big fat wide one. Why not let out? Maybe a kill switch next time?

letting off wouldn't have made a difference, The truck wouldn't have stopped in time !!!
he landed in "deep" Rutts that you cant see when that high up or even in the video, .......... and it happened so fast...as it usually does.

If he would of moved over more to the right at launch, it would of been smooth sailing.

Kill switch ...........I don't no who would flip that switch , its not over
till you break, flip or hit the finish line :D

Live & learn

Went shopping...... truck would'nt idle for shit, went to central florida machine & speed A.K.A Rib lizzy and he hooked us up. :D

http://i294.photobucket.com/albums/mm112/TRAINHORN69/Carb2.jpg

on old Carb today , we also kept blowing out the dip stick :laughing:
P.S Gary fuck you
YouTube - $tucco Money racing (http://www.youtube.com/watch?v=AZzTypXXkSM)
YouTube - $tucco Money racing (http://www.youtube.com/watch?v=23R7mRNynxI)

The Pup

The 2.5 front is already under it ......but here is a picture i just got.
it will be done this week and will be playing Nov 28th , Bithlo Motor sports

I love what the water jet guy did :grinpimp:

http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07107.jpg

Sexy ram mounts :)
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07106.jpg

That looks so nice, you should have a blast in your new pup

Train Horn- what size ram is that in the pic?

:shaking:I like the flip on the big green chevy.20,000 in motor and no rollcage,if that roll had been in 3' of water the out come would not have been good.

Train Horn- what size ram is that in the pic?

2x8 TR CYL 1.25 Rod

And it gets better :grinpimp:
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07115.jpg
http://i82.photobucket.com/albums/j259/punyoung/the%20pup/DSC07112.jpg

My friend and team mate Ammie (on left ) rolled her truck Saturday night
http://i294.photobucket.com/albums/mm112/TRAINHORN69/Girlscantoo.jpg

The roll cage did it's job & landed on all 4 :D
She will be back bigger & badder

http://i990.photobucket.com/albums/af22/mandipupp/silverbullet.gif

Glad that she is OK, but now she is a member of the rollover club

it always suprises how everyone seems to put 100ft of tubing under the frame to brace all the heavy shit and never build a roll cage over their head:shaking:

it always suprises how everyone seems to put 100ft of tubing under the frame to brace all the heavy shit and never build a roll cage over their head:shaking:

You have a good point, ... I have a rag top and a roll cage,all our trucks do.....
ive seen "alot" of rolls and everyone came out good with the standard roll cage!!
If you properly wear your harness that helps alot also.


Thank you