What's the biggest size boggers you guys with 22r's & 22re's run? I was running 35.00 X 16.00's and in 2nd gear low it would start to bog in certain area's and I would have to sip the clutch to keep up the rpm's. I would have dropped into 1st but with 5.29's I didn't want to crawl around in the mud.

I didn't want to crawl around in the mud.

I don't think you are going to have much of a choice with a 4 banger.

My friend's death trap yota, cut 39.5's, stock 4.10's. He plays in 1st gear 4 low and just kinda creeps anywhere he wants to.

http://img.photobucket.com/albums/v710/XBleedTruthX/DOH/stupid007.jpg

Im running 35x14.5 boggers on my 22re. The engine has headers, cam, exhaust, and bored .40 over. 5.29's in the axles and lockrights. In 4 low 3rd I can scream through mud like nobodys business:flipoff2:

I used to run the 16/35/r15 boggers on the rear and 36x14.5 radials on the front with a 4.88. Like you said I couldn't keep up the wheel speed. I went the complete other direction (skinnys) and picked up a set of 34.10.50 LTBs. They don't pull like boggers, but I find I have a lot more fun because I'm able to spin them.
http://i3.photobucket.com/albums/y55/grandeyota/IMG_0182.jpg

I had a friend that used to run 44's with a 22r. He broke a few ring gears but it worked pretty well. Don't know what gears he ran though.
http://i3.photobucket.com/albums/y55/grandeyota/blkyota_web.jpg

my buddy ran/runs a 22r bottom 20 r head with weber cam header and with 4.10 he really couldnt spin at all in thick stuff burned up a clutch......in soup it was fine

but he went to 5.29's and he can spin in the thicker stuff now

i had a old worn out 22r with 35-16-15 boggers and in low range 1-2 gear you can go anywhere

I run 35x14.5 boggers on my 4runner, they do pretty good with the 22re. In 2wheel drive i can spin them and keep them clean. In 4 wheel high i just dont have enough motor to keep all four spinning. 4low works good in 1st gear but in 2nd they do bog the motor down a little if im in really thick mud.

when i had my toyota i always ran in 4 low and went thru the gears as needed

I have a auto 4runner on 33s and it wont pull a greased string out of a cats ass!!

then don't be a pussy and swap in a 5-speed, 1st & 2nd gear, low Pull HARD! son