: i need some ideas


hogg79
01-11-2009, 08:27 AM
i just got this 1982 ford 4x4 and i would like to do some things to it any ideas will be helpfull it has a 300 engine and 4 speed granny low and it runs good i just need some help.it shakes when i go about 50 mph.

thejon2524
01-11-2009, 09:20 AM
Keep it under 50

hogg79
01-11-2009, 09:47 AM
hahahahahah real funny

fatboyf150
01-11-2009, 10:33 AM
install 25 inches of lift and tractor tires!

outfitter540
01-11-2009, 11:31 AM
are you asking what you should do about the shake or modifying it?

thejon2524
01-11-2009, 11:48 AM
install 25 inches of lift and tractor tires!

This will also help achieve better MPG.

hogg79
01-11-2009, 04:31 PM
really i need both

79redneck460
01-11-2009, 11:38 PM
this is my 82 f 150 ............. 15 inches of lift coil spring front and rear , 4 link front and rear, 1 tons , 44 inch cut boggers , dual transfer cases , np 435 4 spd , 302 , 20,000 pound tulsa pto winch in the bed. :flipoff2:



http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=227741237&albumID=1063164&imageID=15793061


http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=227741237&albumID=1063164&imageID=15793063


http://viewmorepics.myspace.com/index.cfm?fuseaction=viewImage&friendID=227741237&albumID=1063164&imageID=15793063

Ak_F250
01-11-2009, 11:56 PM
You have your own forum now. Stop showing off your ghetto piece of shit here.
Your rear four link is missing the four links, and unless you have 3 radius arms, you dont have a 4 link in the front.

79redneck460
01-12-2009, 01:47 PM
after the pics were taken the 4 link bars and brackets went in the rear end and the front is still radius arm but will soon be 4 link :flipoff:. and yea it is a peice of shit . so what

GMCTruxrule
01-12-2009, 02:10 PM
The same piece of shit with the never-dynoed 600 hp 302 in it?:shaking:

79redneck460
01-12-2009, 02:35 PM
yep:D still the same peice of shit

willys101_4lo
01-12-2009, 02:37 PM
after the pics were taken the 4 link bars and brackets went in the rear end and the front is still radius arm but will soon be 4 link :flipoff:. and yea it is a peice of shit . so what

Look cock-smoke, you can't run around telling people your hunk of shit has a 4 link in it when "the front is still radius arm but will soon be 4 link." Until it happens, nobody gives a fuck what your plans are.

Now go throw a bunch of rusty roofing nails in a blender set on mince along with some vinegar, used tampons from AIDS infected crack whores (or your white trash girlfriend's mom), and have yourself a great time fucking that thing

85_Bronco
01-12-2009, 03:01 PM
600hp 302??? if you had any upgrade on your motor you would have some pics of it. but ill give you the benafit of the doubt, bone stock 302 with a set of valve covers, is my guess:shaking:

Ak_F250
01-13-2009, 04:08 AM
Come on guys, its only 500hp.

Because the guy who built it told him so.
I need a hot air injection setup on my mustang, ive spent thousands for 350 horse. Silly me

outfitter540
01-13-2009, 12:52 PM
i just got this 1982 ford 4x4 and i would like to do some things to it any ideas will be helpfull it has a 300 engine and 4 speed granny low and it runs good i just need some help.it shakes when i go about 50 mph.

well for the shake does it keep getting worse past 50mph? Check for worn Ujoints, weights that have been thrown off of the wheels.

Ford what? F150,F250,F350? SAS would be high on my list for mods. With lower gears and bigger tires. You really need to get out and wheel it to see what you should add to it. If you just want to build a BGT:barf: and not wheel it you can just GTFO.:flipoff2:

hogg79
01-13-2009, 01:05 PM
sorry ass f-150